The mixture formation in a single-cylinder, optical port-injected gasoline engine was investigated for both closed- and open-valve injection strategies with a combination of phase Doppler anemometry, laser-induced fluorescence and Mie scattering and correlated with combustion development and exhaust emissions. Detailed crank angle resolved data of the flow and mixture distribution during induction and compression have revealed the advantages of early open-valve injection, in terms of extending the lean limit and maintaining satisfactory engine performance and HC/NOx emissions, achieved through charge stratification in the vicinity of the spark plug at the time of ignition.
LancasterD.R.KriegerR.B.LieneschJ.H.Measurement and analysis of engine pressure dataSAE Paper 750026, 1975.
2.
KadotaT.MizataniS.WuC.-Y.HoshinoM.Fuel droplet size measurements in the combustion chamber of a motored SI engine via laser Mie scatteringSAE Paper 900477, 1990.
3.
ZhaoH.LadommatosN.Optical diagnostics for in-cylinder mixture formation measurements in IC engines. Prog. Energy and Combust. Sci., 1998, 297–336.
4.
ArcoumanisC.GoldM.R.WhitelawJ.H.XuH. M.GaadeJ.E.WallaceS.Droplet velocity/size and mixture distribution in a single-cylinder four-valve spark-ignition engineSAE Paper 981186, 1998.
5.
BrehmC.CarabateasN.CousynB.ManganoR.NeveuF.PosylkinM.WhitelawJ.H.Evaluation of the influence of injector type in a four-valve engineSAE Paper 961998, 1996.
6.
MeyerR.HeywoodJ. B.Liquid fuel transport mechanisms into the cylinder of a firing port-injected SI engine during start upSAE Paper 970865, 1997.
7.
ShinY.MinK.ChengK.Visualisation of mixture preparation in a port fuel injection engine during engine warm-upSAE Paper 952481, 1995.
8.
LadommatosN.Mechanisms of heat transfer to liquid films in the manifold of port-injected petrol enginesProc. Instn Mech. Engrs, Part D, Journal of Automobile Engineering1993, 207(D3), 211–222.
9.
ChappuisS.CousynB.PosylkinM.VannobelF.WhitelawJ. H.Effects of injection timing on performance and droplet characteristics of a sixteen-valve four cylinder engineExperiments in Fluids1997, 22, 336–344.
10.
VannobelF.ArnoldA.BuschmannA.SickV.WolfrumJ.CousynB.DeckerM.Simultaneous imaging of fuel and hydroxyl radicals in an in-line four cylinder SI engineSAE Paper 932696, 1993.
11.
AlmkvistG.DenbratI.JosefssonG.MagnussonI.Measurements of fuel film thickness in the inlet port of an SI engine by laser induced fluorescenceSAE Paper 952483, 1995.
12.
BaritaudT. A.HeinzeT. A.Gasoline distribution measurements with PLIF in a SI engineSAE Paper 922355, 1992.
13.
LawrenzW.KohlerJ.MeierF.StolzW.WirthR.BlossW. H.MalyR. R.WagnerE.ZahnZ.Quantitative 2D LIF measurements of air/fuel ratios during the intake stroke in a transport SI engineSAE Paper 922320, 1992.
14.
SaitoK.SekiguchiK.ImatakeN.TakedaK.YaegashiT.A new method to analyse fuel behaviour in a spark ignition engineSAE Paper 950044, 1995.
15.
DeschampsB.SnyderR.BaritaudT.Effect of flow and gasoline stratification on combustion in a 4-valve SI engineSAE Paper 941993, 1994.
16.
BradleyD.HynesJ.LawesM.SheppardC. G. W.Limitations to turbulence-enhancement burning rates in lean burn engines. In IMechE Conference, 1988, Paper C46/88, pp. 17–24 (Mechanical Engineering Publications, London).
17.
CarabateasN.TaylorA. M. K. P.WhitelawJ. H.IshiiK.MiyanoH.YoshidoK.MatsukiM.The effect of injector and intake port design on in-cylinder fuel droplet distribution, airflow and lean burn performance for a Honda VTEC-E engineSAE Paper 961923, 1996.
18.
HuZ.VafidisC.WhitelawJ. H.ChapmanJ.HeadR. A.Correlation between in-cylinder flow, performance and emissions characteristics of a Rover pentroof four-valve engine. In IMechE Conference, 1992, Paper C448/026 (Mechanical Engineering Publications, London).
19.
MeyerJ.HaugM.SchrieberM.UnverzagtS.Controlling combustion in a spark ignition engine by quantitative fuel distributionSAE Paper 950107, 1995.
20.
PosylkinM.TaylorA. M. K. P.VannobelF.WhitelawJ. H.Fuel droplets inside a firing spark-ignition engineSAE Paper 941989, 1994.
21.
TakedaK.YaegashiT.SekiguchiK.SaitoK.ImatakeN.Mixture preparation and HC emissions of a 4-valve engine with port fuel injection during cold starting and warm-upSAE Paper 950074, 1995.
