Residual stress state is a fundamental aspect of welded joints, especially when complex geometries are considered. In this article, the residual longitudinal stresses in friction stir-welded joints were measured. In particular, different joint configurations were taken into account, namely butt joints, T, and lap ones, the latter being definitively interesting case studies with reference to applications in the transportation industries and, particularly in the aerospace industries.
NandanR.DebRoyT.BhadeshiaH. K. D. H.Recent advances in friction-stir welding. Process, weldment structure and properties. Prog. Mater. Sci., 53(6), 980–1023.
2.
RhodesC. G.MahoneyM. W.BingelW. H.SpurlingR. A.BamptonC. C.Effects of friction stir welding on microstructure of 7075 aluminium alloy. Scr. Mater., 1997, 31(1), 69–75.
ShigematsuI.KwonY. J.SuzukiK.ImaiT.SaitoN.Joining of 5083 and 6056-T4 aluminium alloys by friction stir welding. J. Mater. Sci. Lett., 2003, 22(5), 353–356.
5.
LeeW. B.YeonY. M.JungS. B.The improvement of mechanical properties of friction-stir-welded A356 Al alloy. Mater. Sci. Engng A, 2003, A355, 154–159.
6.
PeelM.SteuwerA.PreussM.WithersP. J.Microstructure, mechanical properties and residual stresses as a function of welding speed in aluminium AA5083 friction stir welds. Acta Mater., 2003, 51(16), 4791–4801.
7.
BussuG.IrvingP. E.The role of residual stress and heat affected zone prop. on fatigue crack propagation in friction stir welded 2024-T351 aluminium jointsInt. J. Fatigue2003, 25(1), 77–88.
8.
StaronP.KocakM.WilliamsS.Residual stresses in friction stir welded Al sheetsAppl. Phys. A: Mater. Sci. Process., 2000, 74 (Suppl. II), S1161–S1162.
9.
PrevéyP.MahoneyM.Improved fatigue perform. of friction stir welds with low plasticity burnishing: Residual stress design and fatigue performance assessment. Mater. Sci. Forum, 2003426-432(4), 2933–2940.
10.
ReynoldsA. P.TangW.Gnaupel-HeroldT.PraskH.Structure, properties and residual stress of 304L stainless steel friction stir welds. Scr. Mater., 2003, 48, 1289–1294.
11.
DattomaV.De GiorgiM.NobileR.On the residual stress field in the aluminium alloy FSW joints. Strain, 2009, 45(4), 380–386.
12.
AltenkirchJ.SteuwerA.WithersP. J.WilliamsS. W.PoadM.WenS. W.Residual stress engineering in friction stir welds by roller tensioning. Sci. Technol. Welding Joining, 2009, 14(2), 185–192.
13.
HatamlehO.RiveroI. V.SwainS. E.An investigation of the residual stress characterization and relaxation in peened friction stir welded aluminum-lithium alloy joints. Mater. Des., 2009, 30(9), 3367–3373.
14.
PrevéyP.MahoneyM.Improved fatigue performance of friction stir welds with low plasticity burnishing: Residual stress design and fatigue performance assessment. Mater. Sci. Forum, 2003426-432(4), 2933–2940.
15.
WooW.ChooH.BrownD. W.FengZ.LiawP. K.Angular distortion and through-thickness residual stress distribution in the friction-stir processed 6061-T6 aluminium alloy. Mater. Sci. Engng A, 2006, 437, 64–69.
16.
LintonV. M.RipleyM. I.Influence of time on residual stresses in friction stir welds in agehardenable 7xxx aluminium alloys. Acta Mater., 2008, 56(16), 4319–4327.
17.
BuffaG.FratiniL.PastaS.ShivpuriR.On the Thermo-mechanical loads and the resultant residual stresses in friction stir process operations. Ann. CIRP, 200857/1, 287–290.
18.
FratiniL.PastaS.ReynoldsA. P.Fatigue crack growth in 2024-T351 friction stir welded joints: Longitudinal residual stress and micro-structural effects. Int. J. Fatigue, 2009, 31(3), 495–500.
19.
PastaS.ReynoldsA. P.Residual stress effects on fatigue crack growth in a Ti-6Al-4V friction stir weld. Fatigue Fract. Engng Mater. Struct., 2008, 31, 569–580.
20.
FratiniL.BuffaG.ShivpuriR.Mechanical and metallurgical effects of in process cooling during friction stir welding of AA7075-T6 butt joints. Acta Mater., 2010, 58, 2056–2067.
21.
BuffaG.FratiniL.MicariF.Key factors for industrial applicability of friction stir welded T-joints of different materials. Trans. Namri/SME, 2010, 38, 499–506.
22.
ChengW.FinnieI.Measurement of residual hoop stresses in cylinders using the cut compliance method. ASME J. Engng Mater. Technol., 1986, 108, 87–92.
23.
SchindlerH. J.Experimental determination of crack closure by the cut compliance technique. In ASTM STP 1343, advances in fatigue crack closure measurement and analysis (Eds McClungR. C.NewmanJ. C.Jr.), 1999 (American Society for Testing and Materials, Philadelphia).
24.
PrimeM. B.Residual stress meas. by successive extension of a slot: The crack compliance method. Appl. Mech. Rev., 1999, 52(2), 75–96.
25.
BucknerH.A novel principle for computation of stress intensity factors. Z. Angew. Math. Mech., 1970, 50, 529–546.
