Sage Journals: Discover world-class research

Abstract

Selective laser sintering is used to prepare components from a kind of blended powder of polyamide 12 (PA12) and organically modified rectorite (OREC). The effects of OREC on the sintering parameters and mechanical properties of the sintered specimens are investigated. The results show that the laser power needed for sintering decreases greatly and the mechanical properties of the sintered specimens are imprved considerbly with the addition of OREC. The differential scanning calorimetry result shows that the crystallization behavior of the PA12-OREC composites is different from that of pure PA12. X-ray diffraction and scanning electron microscope results show that OREC is intercalated by PA12 during the sintering process and PA12-OREC nanocomposites are formed.

Keywords

selective laser sintering polyamide 12 rectorite nanocomposite

Get full access to this article

View all access options for this article.

References

Nelson

J. C.

Xue

Barlow

J. W.

Beaman

J. J.

Marcus

H. L.

Bourell

D. L.

Model of the selective laser sintering of bisphenol-A polycarbonate

Ind. Eng. Chem. Res., 1993, 32, 2305–2317.

Childs

T. H. C.

Berzins

Ryder

G. R.

Tontowi

Selective laser sntering of an amorphous polymersimulations and experiments

Proc. Instn Mech. Engrs, J. Mater. Process. Technol., 1999, 213, 333–349.

H. C. H.

Gibson

Cheung

W. L.

Effects of energy density on morphology and properties of selective laser sintered polycarbonate

J. Mater. Process. Technol., 1999, 89–90, 204–210.

Vaia

R. A.

Jandt

K. D.

Kramer

E. J.

Giannelis

E. P.

Kinetics of polymer melt intercalation

Macromolecules, 1995, 28, 8080–8085.

Hasegawa

Okamoto

kato

Usuki

Preparation and mechanical properties of polypropylene-clay hybrids based on modified polypropylene and organophilic clay

J. Appl. Polym. Sci., 2000, 78, 1918–1922.

Childs

T. H.C.

Tontowi

A. E.

Selective laser sintering of a crystalline and a glass-filled crystalline polymer: Experiments and simulations

Proc. Instn Mech Engrs, 2001, 215, 1481–1495.

H. C. H.

Cheung

W. L.

Gibson

Effects of graphite powder on the laser sintering behaviour of polycarbonate

Rapid Prototyping, 2002, 8 (4), 233–242.

Liu

Zhu

Studies on nylon6/clay nanocomposites by melt-intercalation Process

J. Appl. Polym. Sci., 1999, 71, 1133–1138.

Kojima

Usuki

Kawasumi

Okada

Kurauchi

Kamigaito

Kaji

Novel preferred orientation in injection-molded nylon6-clay hybrid

J. Polym. Sci. Part B, 1995, 33, 1039–1045.

10.

Maiti

Nam

P. H.

Okamoto

Influence of crystallization on intercalation, morphology, and mechanical properties of polypropylene/clay nanocomposites

Macromolecules, 2002, 35, 2042–2049.

11.

Vaia

R. A.

Giannelis

E. P.

Lattice model of polymer melt intercalation in organically-modified layered silicates

Macromolecules, 1997, 30, 7990–7999.

12.

Vaia

R. A.

Giannelis

E. P.

Polymer melt intercalation in organically-modified layered silicates: Model predictions and experiment

Macromolecules, 1997, 30, 8000–8009.

13.

Zhang

Wang

Men

Dispersion and tensile behavior of polypropylene/montmorillonite nanocomposites produced via melt intercalation

Chin. J. Polym. Sci., 2003, 21, 359–367.

14.

Fang

Liu

Zhang

Wang

Preparation and structural characterization of polystyrene-rectorite nanocomposites

Wuhan Univ. J. Nat. Sci., 2003, 8, 817–820.

Selective laser sintering of polyamide-rectorite composite

Abstract

Abstract

Keywords

Get full access to this article

References