This paper investigates vehicle dynamic response for the increasingly common manoeuvre over single speed bumps, which is a non-trivial complex motion. One major aim of the study is to investigate the effect of the anti-roll bar upon vehicle body dynamics, while negotiating such traffic calming features. Numerical predictions are made with an intermediate vehicle model, whose results conform well to the actual vehicle tests. These results seem to suggest that events caused by truncated speed bumps can have implications for design of anti-roll bars from a ride comfort viewpoint, over and above the usual requirements dictated by safe vehicle handling.
SharpR. S.Influences of suspension kinematics on pitching dynamics of cars in longitudinal maneuveringVehicle Syst. Dyn. Suppl., 1999, 33, 23–36.
2.
AzmanM.RahnejatH.KingP. D.GordonT. J.Influence of anti-dive and anti-squat geometry in combined vehicle bounce and pitch dynamicsProc. Instn Mech. Engrs, Part K: J. Multi-body Dynamics, 2004, 218 (K4), 231–242.
RahnejatH.Multi-body dynamics: vehicles, machines, and mechanisms, 1998 (Professional Engineering Publishing, Bury St Edmunds and London, and Society of Automotive Engineers (SAE) co-publishers).
5.
PacejkaH. B.Tyre and vehicle dynamics, 2002 (Butterworth-Heinemann Publications, Oxford, UK).
6.
Van OostenJ. J.M.PacejkaH. B.SWIFT-Tyre: an accurate tyre model for ride and handling studies also at higher frequencies and short road wavelengths. Proceeding of ADAMS World Users’ Conference, 2000, Orlando.
7.
GipserM.FTire: A physically based application-oriented tyre model for use with detailed MBS and finite-element suspension modelsVehicle system dynamics, 2005, 43, 76–91.
8.
GordonT. J.BestM. C.DixonP. J.An automated driver based on convergent vector fieldsProc. Instn Mech. Engrs, Part D: J. Automobile Engineering, 2002, 216, 329–347.
