Simulation of the sequence of dynamic events causing a vehicle to rollover could provide insight on the vehicle propensity to roll. It can also help in adapting control approaches to avoid vehicle rollover. Two analytical formulations of a similar vehicle modelling approach that reproduces the roll motion of a vehicle, including suspensions and tires, are derived. The effect of tire lift off during heavy cornering manoeuvres is considered. Disturbances such as lateral acceleration and road inputs causing vehicle roll can be applied. Critical vehicle dynamic conditions are simulated using the commercial human vehicle environment (HVE) three-dimensional simulation software and applied as inputs to the derived vehicle roll models. The vehicle dynamic behaviour simulated was validated by comparing with results from HVE. These models can serve as useful tools for testing vehicle roll stability algorithms for active suspension systems and for developing new anti-roll control strategies.
SegelL.On the lateral stability and control of the automobile as influenced by the dynamics of the steering systemsTrans. ASME, J. Ind., 1996, 88 (3), 283–295.
2.
LugnerP.PlochlM.HeinzlP.Concepts for the modelling of a passenger car. Multi-Body Dynamics: Monitoring and Simulation Techniques, 2nd Triennial International Symposium, University of Bradford, West Yorkshire, UK, 27-28 June 2000.
SIMPACK User Manual, 1997 (INTEC Gmbh, Wessling, Germany).
6.
WielengaT. J.A method for reducing on-road rollovers - antirollover braking. Presented at the Society of Automotive Engineers International Congress and Exposition, Detroit, March 1999, SAE paper 1999-01-0123.
7.
ChaceM. A.WielengaT. J.A test and simulation process to improve rollover resistance. Presented at the Society of Automotive Engineers International Congress and Exposition, Detroit, March 1999, SAE paper 1999-01-0125.
8.
WielengaT. J.Tire properties affecting vehicle rollover. Presented at the Society of Automotive Engineers International Congress and Exposition, Detroit, March 1999, SAE paper 1999-01-0126.
9.
RenfroeD. A.PartainJ.LaffertyJ.Modeling of vehicle rollover and evaluation of occupant injury potential using MADYMO. Presented at the Society of Automotive Engineers International Congress and Exposition, Detroit, February 1998, SAE paper 980021.
10.
MADYMO User's Manual, 2005 (TNO Automotive Safety Solutions, The Netherlands).
11.
HVE User's Manual, 2005 (Edccorp, CA).
12.
STISIM User's Manual (Systemstech, CA).
13.
AllenR. W.RosenthalT. J.A computer simulation analysis of safety critical maneuvers for assessing ground vehicle dynamic stability. Presented at the Society of Automotive Engineers International Congress and Exposition, Detroit, February 1993, SAE paper 930760.
14.
DayT. D.Validation of the EDVSM 3-dimensional vehicle simulator. Presented at the Society of Automotive Engineers International Congress and Exposition, Detroit, February 1997, SAE paper 970958.
15.
ChengH.RizerA. L.ObergefellL. A.Pickup truck rollover accident reconstruction using the ATB Model. Presented at the Society of Automotive Engineers International Congress and Exposition, Detroit, February 1995, SAE paper 950133.
16.
FleckJ. T.ButlerF. E.DeLeysN. J.Validation of the crash victim simulator. Department of Transportation Technical Reports DOT-HS-806-279 through 282, vol. 1-4, 1982.
17.
ButlerF. E.FleckJ. T.Development of an improved computer model of the human body and extremity dynamics. Technical Report AMRL-TR-75-14. Harry G. Armstrong Aerospace Medical Research Laboratory, Wright-Patterson AFB, OH, 1975.
18.
NaleczA. G.LuZ.d'EntremontK. L.An investigation into dynamic measures of vehicle rollover propensity. Presented at the Society of Automotive Engineers International Congress and Exposition, Detroit, February 1993, SAE paper 930831.
19.
NaleczA. G.LuZ.d'EntremontK. L.Advanced dynamic vehicle simulation (ADVS) to investigate rollover behavior. NHTSA-US DOT Contract No. DTNH22-87-D-27174, April 1991.
20.
NaleczA. G.BindemannA. C.BareC.Sensitivity analysis of vehicle tripped rollover model. NHTSA - US DOT Final Report No. DOT-HS 807 300, Washington, DC, July 1988.
21.
GarrottW. R.HoweJ. G.ForkenbrockG.An experimental examination of selected maneuvers that may induce on-road untripped, light vehicle rollover - Phase II of NHTSA's 1997-1998 vehicle rollover research program. Report No. DOT HS 808 977, NHTSA Vehicle Research and Test Center, January 1999.
22.
KazemiR.SoltaniK.The effects of important parameters on vehicle rollover with sensitivity analysis. 2003 SAE World Congress, Detroit, Michigan, 3-6 March 2003, SAE paper 2003-01-0170.
23.
HacA.Rollover stability index effects of suspension designSAE paper 2002-01-0965, 2002.
24.
MiegeA. J.P.CebonD.Design and implementation of an active roll control system for heavy vehicles. Technical report, University of Cambridge, UK, 2002.
KonigL.Erstellung eines leicht parametrierbaren, modularen gesamtfahrzeugmodells und implementierung in Matlab-Simulink. Studienarbeit, IVK Universitat Stuttgart, July 2001.
27.
DayT. D.Validation of the SIMON model for vehicle handling and collision simulation - comparison of results with experiments and other models., Engineering Dynamics CorporationSAE paper 2004-01-1207, 2004.
28.
DayT. D.The simulation of driver inputs using a vehicle driver model., Engineering Dynamics Corporation; L.D. Metz, Metz Engineering and RacingSAE paper 2000-01-1313, 2000.
