The performance of the coordinate partitioning method, the method of Lagrangian multipliers with Baumgarte's stabilization, and the penalty method to account for non-linear constraints of a linear beam element based on the absolute nodal coordinate formulation is studied. Proper non-linear constraints are selected to avoid high-frequency transverse or shear oscillations of the beam. The results show that harmful oscillations can be successfully eliminated from the beam response and efficiency of the numerical solution improves when these constraints are used in the solution procedure. In case of a swinging pendulum, the calculation speed could be improved, when compared to the non-constrained case. It was found that the overall performance of the Lagrange multiplier method with Baumgarte's stabilization and carefully selected stabilization parameters was the best approach.
MikkolaA. M.ShabanaA. A.‘A non-incremental finite element procedure for the analysis of large deformations of plates and shells in mechanical system applications’Multibody Syst. Dyn.9 (2003): 283–309
6.
GerstmayrJ.ShabanaA. A.‘Efficient integration of the elastic forces and thin three-dimensional beam elements in the absolute nodal coordinate formulation’In Proceedings of the Multibody Dynamics 2005, ECCOMAS Thematic Conference, Madrid, Spain, 2005.
7.
DufvaK.SopanenJ.MikkolaA.‘A two-dimensional shear deformable beam element based on the absolute nodal coordinate formulation’J. Sound Vibr.280 (2005): 719–738
8.
MikkolaA. M.MatikainenM. K.‘Development of elastic forces for a large deformation plate element based on the absolute nodal coordinate formulation’J. Comput. Nonlin. Dyn.12 (2006): 103–108
9.
SchwabA.MeijaardJ.‘Comparison of three-dimensional flexible beam elements for dynamic analysis: finite element method and absolute nodal coordinate formulation’ In Proceedings of the IDEC/CIE 2005, ASME 2005 International Design Engineering Technical Conferences, Long Beach, California, 2005, paper no. DETC2005-85104.
10.
SugiyamaH.EscalonaJ. L.ShabanaA. A.‘Formulation of three-dimensional joint constraints using the absolute nodal coordinates’Nonlinear Dyn.31 (2003): 167–195
11.
SugiyamaH.ShabanaA.‘On the use of implicit integration methods and the absolute nodal coordinate formulation in the analysis of elasto-plastic deformation problems’Nonlinear Dyn.27 (2004): 245–270
12.
GéradinM.CardonaA.Flexible multibody dynamics: a finite element approach (Chichester: Wiley2001)
13.
SugiyamaH.GerstmayrJ.ShabanaA. A.‘Deformation modes in the finite element absolute nodal coordinate formulation’J. Sound Vibr.298 (2006): 1129–1149
14.
SernaM. A.AvilésR.de JalónJ. G.‘Dynamic analysis of plane mechanisms with lower pairs in basic coordinates’Mech. Mach. Theory176 (1982): 397–403
15.
WehageR.HaugE.‘Generalized coordinate partitioning for dimension reduction in analysis of constrained dynamic systems’J. Mech. Des.104 (1982): 247–255
16.
BayoE.de JalónJ. G.SernaM. A.‘A modified lagrangian formulation for the dynamic analysis of constrained mechanical systems’Comput. Methods Appl. Mech. Eng.712 (1988): 183–195
TruesdellC.NollW.The non-linear field theories or mechanics (Berlin: Springer2003)
19.
BaumgarteJ.‘Stabilization of constraints and integrals of motion in dynamical systems’Comput. Methods Appl. Mech. Eng.1 (1972): 1–16
20.
BayoE.de JalónJ. G.Kinematic and dynamic simulation of multibody systems: the real-time challenge (New York: Springer1993)
21.
GerstmayrJ.MatikainenM. K.MikkolaA.‘A geometrically exact beam element based on the absolute nodal coordinate formulation’Multibody Syst. Dyn.204 (2008): 359–384
22.
BrenanK.CampbellS.PetzoldL.Numerical solution of initial-value problems in differential-algebraic equations (Philadelphia, Pennsylvania: North-Holland 1989)
23.
Eich-SoellnerE.FührerC.Numerical methods in multibody dynamics (Stuttgart: Teubner2002)
24.
KerkkänenK. S.SopanenJ. T.MikkolaA. M.‘A linear beam finite element based on the absolute nodal coordinate formulation’J. Mech. Des.1274 (2005): 621–630
25.
RhimJ.A vectorial approach to finite rotation beams (1996) PhD Thesis
26.
SopanenJ. T.MikkolaA. M.‘Description of elastic forces in absolute nodal coordinate formulation’Nonlinear Dyn.341 (2003): 53–74
27.
GereJ. M.TimoshenkoS. P.Mechanics of mat-erials2nd edition, (Boston: PWS Engineering1997) Van Nostrand Reinhold, Wokingham
28.
TimoshenkoS.YoungD. H.WeaverW.Vibration problems in engineering (New York: John Wiley1974)
29.
InmanD. J.Engineering vibration (New Jersey: Prentice Hall, Upper Saddle River2001)
30.
GerstmayrJ.IrschikH.‘On the correct representation of bending and axial deformation in the absolute nodal coordinate formulation with an elastic line approach’J. Sound Vibr.318 (2008): 461–487
