Design of welded structures working under random loading

Abstract

Abstract

This paper presents a design method for prediciting the fatigue life of T-joint assemblies loaded by random loads, based on a statistical analysis of tests. This sduty was on the correclation between the types of loading observed in practive and test results obtained for fatigue life determination. The work follows three steps: analysis tof the statistical distributions of random loads that illustrate extremen value from Markov matrix representations; statistical analysis of lifetimes obtained when the specimens are sbumitted to random loads defined earlier; design of a set of endurance curves [stress-number of cycles to failure (S-N) curves], called ‘random’ S-N curves. These SN curves. These S-N curves are shifted compared with that obtained under sinusoidal loading. Random S-N curve positions in the S-N plane are obtimized depending on the lifetime able to take into account the damege due to the small cycles that are often present in actual loading. The use of random S-N curves for fatigue life calculations gives results matching with theral fatigue lifetime obtained with a T-joint assembly of a bogie chassis used for railway applications. Different analyses show the robustness of the proposed approach.