The École Centrale de Lyon surface force apparatus: An application overview

Abstract

The ECL (École Centrale de Lyon) surface force apparatus (SFA) has been developed and refined over the last two decades. This paper reviews a number of applications of the SFA that are of interest to the tribologist. In order to predict and improve contact performance, the tribologist needs to understand and quantify the basic properties of the lubricant and the solid bodies it is separating. Previously, these important properties were the material bulk properties, or at least these properties were sufficient. This situation is no longer true, and the material properties of the solids and the lubricant are required on a scale which is small or comparable with the film thickness. Nowadays, that means a scale small or comparable with 10⁻⁷−10⁻⁸ m! It is in this domain that the SFA can provide information on mechanical properties of very thin lubricant films, and on the properties of the solid material close to its surface.

Keywords

surface force apparatus rheology thin films

Get full access to this article

View all access options for this article.

References

Georges

J.-M.

Millot

Loubet

J.-L.

Tonck

The influence of surface roughness on the capacity between a sphere and a plane

J. Chem. Phys., 1993, 98 (9), 7345.

Bec

Tonck

Georges

J.-M.

Georges

Loubet

J.-L.

Improvement in the indentation method with a surface force apparatus

Phil. Mag., 1996, A74 (5), 1061–1072.

Georges

J.-M.

Tonck

Mazuyer

Interfacial friction and adhesion of wetted monolayers.

In Proceedings of 24th Leeds-Lyon Symposium on Tribology, 1997.

Georges

J.-M.

Hollinger

Contact of two carbon surfaces covered with a dispersant polymer

Langmuir, 1997, 13, 3454–3463.

Kornbrekke

R. E.

Morrison

I. D.

Oja

Electrophoretic mobility measurements in low conductivity media

Langmuir, 1992, 8, 1211–1217.

Georges

J.-M.

Tonck

Loubet

J.-L.

Mazuyer

Rheology and friction of compressed polymer layers adsorbed on solid surfaces

J. Phys. II (France), 1996, 6, 57–76.

Lubrecht

A. A.

The influence of local and global features on EHL contacts.

In Proceedings of 23rd Leeds-Lyon Symposium on Tribology, 1996, pp. 17–25.

Cann

P. M.

Spikes

H. A.

Film thickness measurements of greases under normally starved conditions

NLGI Spokesman, 1992, 56, 21–26.

Cann

P. M. E.

Chevalier

Lubrecht

A. A.

Track depletion and replenishment in a grease lubricated point contact: A qualitative analysis.

In Proceedings of 23rd Leeds-Lyon Symposium on Tribology, 1996, pp. 405–413.

10.

Chevalier

Lubrecht

A. A.

Cann

P. M. E.

Colin

Dalmaz

Film thickness in starved EHL point contacts

Trans. ASME, J. Tribology, 1998, 120, 126–133.

11.

Brandt

MultiGrid techniques: 1984 Guide, with applications to fluid dynamics. Monograph, available as GMD Study 85 from GMD-FIT, postfach 1240, D-5205, St. Augustin 1, Germany.

12.

Lubrecht

A. A.

Numerical solution of the EHL line and point contact problem using multigrid techniques. PhD thesis, University of Twente, Enschede, The Netherlands.

13.

Boyer

Houzé

Tonck

Loubet

J.-L.

Georges

J.-M.

The influence of surface roughness on the capacity between a sphere and a plane

J. Phys. D, Appl. Phys., 1994, 27, 1504–1508.

14.

Lubrecht

A. A.

Tonck

The influence of surface roughness in nanometer film hydrodynamic lubrication. Internal Note, 1998.

15.

Bec

Tonck

Nanometer scale mechanical properties of tribochemical films.

In Proceedings of 22nd Leeds-Lyon Symposium on Tribology, 1995, pp. 173–184.

16.

Tonck

Bec

Nanomachining with a surface force apparatus. In Proceedings of the 1998 MRS Spring Meeting on

Fundamentals of Nanoindentation and Nanotribology, San Francisco (in press).