Exact, closed-form, one-dimensional Reynolds equations are presented for the Ostwald-DeWaele model, the Ellis model, the Spriggs model, and the double-Newtonian Rabinowitsch and Ferry models. From numerical solutions for flowrate, an approximate Reynolds-Carreau equation is obtained. These models describe the wide range of constitutive shear responses that have been observed in lubricants at elevated pressure. It is hoped that the equations presented here will enable researchers to perform full elastohydrodynamic lubrication (EHL) simulations of the coupled elasticity and Reynolds equations for shear-thinning liquids.
DysonA.WilsonA. R.Film thickness in elastohy-drodynamic lubrication by silicone fluidsProc. Instn Mech. Engrs, Part K: J. Multi-body Dynamics, 1965-66, 180 (K3), 97–105.
2.
NovakJ. D.WinerW. O.Some measurements of high pressure lubricant rheologyASME J. Lubr. Technol., 1968, 90 (3), 580–591.
3.
BairS.Elastohydrodynamic film forming with shear thinning liquidsASME J. Tribol., 1998, 120, 173–178.
4.
BairS.VergneP.QuerryM.A unified shear-thinning treatment of both film thickness and traction in EHDTribol. Lett., 2005, 18 (1), 145–152.
5.
BairS.QureshiF.KotzalasM.The low shear stress rheology of a traction fluid and the influence on film thicknessProc. Instn Mech. Engrs, Part J: J. Engineering Tribology, 2004, 218, 95–98.
6.
SchultheiszC. R.LeightS. D.Certification of the rheological behavior of SRM 2490, polyisobutylene dissolved in 2,6,10,14-tetramethylpentadecane. NIST special publication 260–143, 2002, pp. 2–27.
7.
BairS.The shear rheology of thin compressed liquid filmsProc. Instn Mech. Engrs, Part J: J. Engineering Tribology, 2002, 216, 1–17.
8.
VillechaiseB.DalmazG.MakalaJ.ChaomleffelJ. P.On the traction fluid behavior in concentrated contactsBoundary and mixed lubrication: science and applications (Eds DowsonD.), 2002, pp. 401–412 (Elsevier, Amsterdam).
9.
BairS.Shear-thinning correction for rolling/sliding elastohydrodynamic film thicknessProc. IMechE, Part J: J. Engineering Tribology, 2005, 219, 69–74.
10.
KleinschmidtR. V.BradburyD.MarkM.Viscosity and density of over forty lubricating fluids of known composition at pressures to 150 000 psi and temperatures to 425°F, 1953 (ASME, New York).
11.
BairS.QureshiF.The generalized newtonian fluid model and elastohydrodynamic film thicknessASME J. Tribol., 2003, 125, 70–75.
12.
BairS.KhonsariM.WinerW. O.High-pressure rheology of lubricants and limitations of the Reynolds equationTribol. Int., 1998, 31 (10), 573–586.
13.
RajagopalK. R.SzeriA. Z.On an inconsistency in the derivation of the equations of elastohydrodynamic lubricationProc. R. Soc. Lond. A, 2003, 459, 2771–2786.
14.
BairS.A Reynolds-Ellis equation for line contact with shear-thinningTribol. Int., 2006, 39, 310–316.
15.
BairS.KhonsariM.Generalized Reynolds equations for line contact with double-Newtonian shear-thinningTribol. Lett., 2005, 18,(4), 513–520.
16.
GreenwoodJ. A.Two-dimensional flow of a non-Newtonian lubricantProc. Instn Mech. Engrs, Part J: J. Engineering Tribology, 2000, 214, 29–41.
17.
GreenwoodJ. A.KauzlarichJ. J.Elastohydrodynamic film thickness for shear-thinning lubricantsProc. Instn Mech. Engrs, Part J: J. Engineering Tribology, 1998, 212, 179–191.
18.
BairS.The high-pressure rheology of some simple model hydrocarbonsProc. Instn Mech. Engrs, Part J: J. Engineering Tribology, 2002, 216, 139–149.
19.
BairS.KhonsariM.An EHD inlet zone analysis incorporating the second newtonianASME J. Tribol., 1996, 118, 341–343.
