The effect of varying parameters on the stiffness and damping of an angular contact ball bearing was studied under rotating conditions. Axial and radial preloads have the most significant effect on dynamic characteristics of bearings, as there is a dependence of the characteristics on oil viscosity. The differential heating of the bearing components could also be a very sensitive factor. It was concluded that the joint between the bearing and the housing has a significant effect on the total dynamic characteristics of the bearing assembly.
DareingD. W.JohnsonK. L.‘Fluid film damping of rolling contact vibrations’J. Mech. Eng. Sci.174 (1975): 214–218
2.
ElsermansM.HongerlootM.SoneysR.‘Damping in taper roller bearings’. In Proceedings of the 16th International MTDR Conference, London, 10–12 September 1976, pp. 223–228.
3.
WalfordT. L. H.StoneB. J.‘The measurement of the radial stiffness of rolling element bearings under oscillating conditions’J. Mech. Eng. Sci.224 (1980): 175–181
4.
KrausJ.BlechJ. J.BraunS. G.‘Determination of rolling bearing stiffness and damping by modal analysis’J. Vib. Acoust. Stress Reliab. Des.1097 (1987): 235–240
5.
ZeillingerR.SpringerH.KöttritshH.‘Experimental determination of damping in rolling bearing joints’. In Proceedings of the 39th ASME International Gas Turbine and Aeroengine Congress/Users Symposium and Exposition, The Hague, The Netherlands, 1994, paper 94-GT-102 (American Society of Mechanical Engineers, New York).
6.
DietlP.WensingJ.Van NijenG. C.‘Rolling bearing camping for dynamic analysis of multi-body system - experimental and theoretical results’Proc. IMechE, Part K: J. Multi-body Dynamics214 (2000): 33-43 DOI: 10.1243/1464419001544124
7.
LambertR. J.PollardA.StoneB. J.‘Some characteristics of rolling element bearings under oscillating conditions. Part 2: Experimental results for interference fitted taper-roller bearings’Proc. IMechE, Part K: J. Multi-body Dynamics220 (2006): 171-179 DOI: 10.1243/1464419JMBD13
8.
GargiuloE. P.‘A simple way to estimate bearing stiffness’Mach. Des.52 (1980): 107–110
9.
PalmgrenA.Ball and roller bearing engineering (Burbank, Philadelphia: 1959)
10.
HarshaS. P.‘Non-linear dynamic response of a balanced rotor supported on rolling element bearings’Mech. Syst. Signal Process.19 (2005): 551–578
11.
DowsonD.MarkhoP. H.JonesD. A.‘The lubrication of lightly loaded cylinders in combined rolling, sliding, and normal motion. Part I: Theory’Trans. ASME J. Lubric. Technol.984 (1976): 509–516
12.
HuntK. H.CrossleyF. R. E.‘Coefficient of restitution interpreted as damping in vibroimpact’ASME J. Appl. Mech.6 (1975): 440–445
13.
SarangiM.MajumdarB. C.SekharA. S.‘Stiffness and damping characteristics of lubricated ball bearings considering the surface roughness effect. Part 2: Numerical results and application’Proc. IMechE, Part J: J. Engineering Tribology218 (6) (2004): 539-547 DOI: 10.1243/1350650042794734
