Polymers and polymer composites replace metals in low duty applications such as gears, bearings, rollers, and so on. Use of these low-modulus and low-strength materials makes the product design more complex. The contact characteristics are severely affected due to low modulus and high stresses and influence the product performance. Effect of apparent area of contact, normal load, and clay addition on the contact characteristics of polyamide 6 and polyamide 6 nanocomposite is reported. The real area of contact, which varies severely with normal load in low modulus materials, affects the coefficient of friction. Addition of nanoclay improves the modulus and reduces the coefficient of friction.
HomolaA. M.IsraelachviliJ. N.McGuigganP. M.GeeM. L.‘Fundamental experimental studies in tribology: The transition from ‘interfacial’ friction of undamaged molecularly smooth surfaces to ‘normal’ friction with wear’Wear136 (1990): 65–83
2.
OnionsR. A.ArchardJ. F.‘The contact of surfaces having a random structure’J. Phys. D, Appl. Phys.6 (1973): 289–304
3.
OgilvyJ. A.‘Numerical simulation of friction between contacting rough surfaces’J. Phys. D, Appl. Phys.24 (1991): 2098–2109
4.
KaelbleD. H.Physical chemistry of adhesion (New York: Wiley-Interscience1971)
5.
McLarenK. G.TaborD.‘Visco-elastic properties and the friction of solids: Friction of polymers: Influence of speed and temperature’Nature197 (1963): 856–858
6.
WangQ. H.ShenW.XuJ.XueQ.‘The effect of nanometer SiC filler on the tribological behavior of PEEK’Wear209 (1997): 316–321
7.
LiF.HuK.-A.LiJ.-L.ZhaoB.-Y.‘The friction and wear characteristics of nanometer ZnO filled polytetrafluoroethylene’Wear249 (2001): 877–882
8.
ShiG.ZhangM. Q.RongM. Z.WetzelB.FriedrichK.‘Friction and wear of low nanometer Si3N4 filled epoxy composites’Wear254 (2003): 784–796
9.
YuS.HuH.ZhangY.LiuY.‘Effect of transfer film on tribological behavior of polyamide 66-based binary and ternary nanocomposites’Polym. Int.57 (2008): 454–462
10.
11.
AlexandreM.DuboisP.‘Polymer-layered silicate nanocomposites: Preparation, properties and uses of a new class of materials’Mater. Sci. Eng. R Rep.28 (2000): 1–63
