Friction modelling of tribofilm performance in a bench tribometer for automotive engine lubricants

Abstract

Research focusing on the initial stages of the development of an empirical model to predict friction in boundary and mixed lubrication conditions accounting for additive and surface interactions is reported in this article. The regression model was constructed by applying a fractional factorial design statistical approach. The model considers a typical friction modifier, molybdenum dithiocarbamate, in a model automotive engine lubricant also containing zinc dialkyldithiophosphate in a synthetic polyalphaolefin base oil under conditions representative of the cam and follower interface in an automotive engine. Operating temperature, sliding speed, load, initial surface roughness, and the initial lambda ratio were taken as the factors affecting tribological performance. The empirical model predicts friction at 95 per cent confidence level within the specific range of parameters considered in the experiments. Not surprisingly, molybdenum dithiocarbamate is mainly responsible for the reduction of friction of the tribofilm, whereas temperature, sliding speed, and load are the other significant parameters.

Keywords

molybdenum dithiocarbamate boundary lubrication mixed lubrication design of experiment friction model

Get full access to this article

View all access options for this article.

References

Dowson

Harrison

Taylor

C. M.

The lubrication of automotive cams and followers, mechanisms and surface distress. Proceedings of the 12th Leeds—Lyon Symposium on Tribology, 1986, pp. 305–322 (Butterworths, London).

Hoshi

Reducing friction losses in automobile engines. Tribol. Int., 1984, 17, 185–189.

Taylor

C. M.

Valve train lubrication analysis, vehicle tribology. Proceedings of the 17th Leeds—Lyon Symposium on Tribology, 1991, pp. 119–131 (Elsevier, Amsterdam).

Mufti

R. A.

Priest

Experimental and theoretical study of instantaneous engine valve train friction. J. Tribol., 2003, 125(3), 628–637.

5 Bovington

C.H.

In Friction, wear and the role of additives in their control, chemistry and technology of lubricants (Eds Mortier

R. M.

Orszulik

S. T.

), 2nd edition, 1997, pp. 320–347 (Blackie, Glasgow).

Buyanovskii

The science of boundary lubrication — the initial period. Chem. Technol. Fuels Oils, 1996, 32(1), 53–56.

Boehm

Martin

J. M.

Grossiord

Mogne

T. L.

Modelling tribochemical reactions of additives by gasphase lubrication. Tribol. Lett., 2001, 11(2), 83–90.

Lashkhi

V. L.

Influence of chemical composition of lubricating medium on friction and wear processes. Khimiya i technologiya Topliv i Masel, 1997, 6, 17–19.

Shibryaev

S. B.

Nemets

V. L.

Fuks

I. G.

Kaminski

S. E.

Influence of oxygen-containing compounds on the efficiency of copper-containing additives in grease. Khimiya i technologiya Topliv i Masel, 1990, 6, 16–18.

10.

Jurkovic

Bulijan

Optimization of extrusion force prediction model using different techniques. J. Achieve. Mater. Manuf. Eng., 2006, 17(1-2), 353–356.

11.

Tan

Huang

Wang

Molecular orbital indexes criteria for friction modifiers in boundary lubrication. Tribol. Int., 2002, 35(6), 381–384.

12.

Box

G. E. P.

Draper

N. R.

Empirical model — building and response surfaces, 1987 (John Wiley & Sons, New York).

13.

Green

J. H.

Lubricant additive interactions, surface reactions and the link to tribological performance in engines. PhD Thesis, School of Mechanical Engineering, University of Leeds, UK, 2005.

14.

Green

J. H.

Priest

Morina

Neville

Evolution of tribofilms under lubrication conditions experienced in engine valve trains, transient processes in tribology. In Proceedings of the 30th Leeds—Lyon Symposium on Tribology, 2003, 2004, pp. 97–108 (Elsevier).

15.

Green

J. H.

Priest

Morina

Neville

Approaches to sensitising engine valve train friction models to lubricant formulation characteristics, tribological research and design for engineering systems. In Proceedings of the 29th Leeds—Lyon Symposium on Tribology 2002, Tribology series 41, 2003, pp. 35–45 (Elsevier).

16.

Dowson

Higginson

G. R.

Elastrohydrodynamic lubrication, 1977 (Pergamon Press, Oxford).

17.

Carley

K. M.

Kamneva

N. Y.

Reminga

Response surface methodology. CASOS Technical Report, Pittsburgh, CMU-ISRI-04-136 2004.

18.

Cruze

Shiff

Minitab reference manual: release 7, 1989 (Minitab Inc., State College, PA, USA).

19.

Dunn

O. J.

Clark

V. A.

Applied statistics: analysis of variance and regression, 1974 (Wiley, New York, London).

20.

Montgomery

D. C.

Design and analysis of experiments, 3rd edition, 1991 (Wiley, New York, Chichester).

21.

Tsybanev

Belas

Evaluation of the limiting state of the material under cyclic and contact loadings with boundary friction. Strength Mater., 2006, 38(2), 166–173.

22.

Topolovec

Miklozic, K.

Graham

Spikes

Chemical and physical analysis of reaction films formed by molybdenum dialkyl-dithiocarbamate friction modifier additive using Raman and atomic force microscopy. Tribol. Lett., 2001, 11(2), 71–81.

23.

Linden

ILSAC GF-5 the picture gets a little clearer. How biofuel tolerant will lubes have to be? Infineum Insight, 2007, 34, 16–17.

24.

Suresh

Babu, A. V.

Martin

Mehta

A. K.

A new test technique for laboratory evaluation of energy — efficient engine oils. Lubr. Sci., 1993, 5, 283–294.

25.

Stolarski

T. A.

Zhou

Smart

Green

Allen

R. W.

Temperature—friction characteristics of cylinder lubrication in large, slow, cross-head marine diesel engines under boundary lubrication conditions. Lubr. Sci., 2004, 16(4), 337–346.