A simple and efficient method for estimating the average seal contact face temperature, surface temperature, and heat partitioning factor between the rings of a mechanical seal is presented. The method takes into account both heat conduction and convection. Design charts applicable to a variety of ring shapes are developed, and a series of examples are presented to illustrate their validity.
LiC. H.Thermal deformation in a mechanical face sealASLE Trans., 1976, 19, 146–152.
2.
MorariuZ.PascoviciM. D.The thermal study of the double mechanical seals. In Proceedings of the 5th Conference on Friction, Lubrication, and Wear TRIBOTEHNICA 87, 1978, Vol. 2, pp. 319–327.
3.
BuckG. S.Heat transfer in mechanical seals. In Proceedings of the 6th International Pump User Symposium, 1989, pp. 9–15.
4.
BuckG. S.Estimating heat generation, face temperature and flush rate for mechanical seals. Pump Users Expo'99, 1999, pp. 167–172.
5.
DoaneJ. C.MyrumT. A.BeardJ. E.An experimental-computational investigation of the heat transfer in mechanical face sealsInt. J. Heat Mass Transf., 1991, 34 (4/5), 1027–1041.
6.
LebeckA. O.Principles and design of mechanical face seals, 1991 (Wiley, New York).
7.
BlasbalgD. A.SalantR. F.Numerical study of two-phase mechanical seal stabilitySTLE Tribol. Trans., 1995, 38, 791–800.
8.
CiconeT.TournerieB.BrunetièneN.Analysis of lubrication regime transition, experimentally observed in liquid face seals, using an analytical model for thermoelastic face distortion. In Proceedings of the 16th International Conference on Fluid sealing, BHR group, Brugge, Belgium, 2000, pp. 449–462.
9.
JangJ. Y.KhonsariM. M.A generalized thermoelastic instability analysisProc. R. Soc. Lond. A, 2003, 459, 309–329.
10.
LuanZ.KhonsariM. M.Numerical simulations of the flow field around the rings of mechanical sealsASME, J. Tribol.2006, 128, 559–565.
11.
LuanZ.KhonsariM. M.Computational fluid dynamics analysis of turbulent flow within a mechanical seal chamberASME, J. Tribol.2007, 129, 120–128.
12.
IncroperaF. P.DewittD. P.Introduction to heat transfer, 3rd edition, 1996 (John Wiley & Sons, New York).
13.
LebeckA. O.Face seal balance ratio selection for two phase single and multi-component mixtures. In Proceedings of the 5th International Pump Symposium, Turomachinery Laboratory, Department of Mechanical Engineering, Texas A&M University, College Station, Texas, 1985, pp. 17–26.
