The most worrisome failure for coated surfaces in tribological contacts is premature coating detachment (adhesive failure). This article presents, by way of case studies, attempts to understand such failures encountered in tribological testing of coated components. Numerical modelling has been used to help understand what stresses at the coating-substrate interface are most detrimental to long interface lifetimes.
KatoT.HokkirigawaK.FukudaT.ShinookaM.TakahashiJ.Wear mode transition of hard films coated on aluminium alloys by the change of normal load In Surface modification technologies X (Ed. SudarshanT. S.), 1997, pp. 841–851 (Institute of Materials, London).
3.
von StebutJ.Multi-mode scratch testing - a European standards, measurements and testing studySurf. Coat. Technol., 2005, 200 (1-4), 346–350.
4.
AraiT.FujitaH.WatanabeM.Evaluation of adhesion strength of thin hard coatingsThin Solid Films, 1987, 154 (1-2), 387–401.
5.
ChengH. S.ChangT. P.SproulW. D.A morphological study of contact fatigue of TiN coated rollers. InMechanics of coatings (Eds DowsonD.TaylorC. M.GodetM.). In Proceedings of the 16th Leeds-Lyon Symposium on Tribology, 1990, pp. 81–88 (Elsevier, Amsterdam).
6.
HeJ. W.XuK. W.HuN. S.Evaluation of interfacial bonding strength of filmsKey Eng. Mater., 1998, 145-149 (1), 559–566.
7.
NikishinV. S.ShapiroG. S.Space problems of elasticity theory for multi-layered bodies (in Russian), 1970 (AN-SSSR: Academy of Sciences (U.S.S.R), Moscow).
8.
MakushkinA. P.Stress-strain state of elastic layer in contact with spherical indentor (I)Soviet J. Frict. Wear, 1990, 11 (3), 423–434.
9.
GoryachevaI. G.TorskayaE. V.A periodical contact problem for a system of dies and elastic layer adhered to another baseSoviet J. Frict. Wear, 1995, 16 (4), 642–652.
10.
GoryachevaI. G.TorskayaE. V.Stress state of coating under discrete loadingSoviet J. Frict. Wear, 1994, 15 (3), 642–652.
11.
TorskayaE.V.GoryachevaI. G.The effect of interface imperfection and external loading on the axisymmetric contact with a coated solidWear, 2003, 254, 538–545.
12.
TorskayaE. V.Analysis of friction effect on stress state of coated bodiesJ. Frict. Wear, 2002, 23 (2), 16–23.
13.
Aldrich-SmithG.JennettN.HousdenJ.Adhesion of thin coatings - the VAMAS (TWA 22-2) interlaboratory exerciseSurf. Coat. Technol., 2005, 197 (2-3), 336–344.
14.
Aldrich-SmithG.TeerD. G.DearnleyP. A.Corrosion-wear response of sputtered CrN and S-phase coated austenitic stainless steelSurf. Coat. Technol., 1999, 116-119, 1161–1165.
15.
Aldrich-SmithG.DearnleyP. A.Corrosion-wear mechanisms of 316L austenitic stainless steel with magnetron sputtered S-phase and CrN coatings. In Proceedings of the 26th Leeds-Lyon Symposium onThinning films and tribological interfaces, 1999 (Eds DowsonD.), Leeds, UK, 2000, pp. 155–161 (Elsevier Science B.V.)
16.
DahmK. L.Aldrich-SmithG.DearnleyP. A.Corrosion and corrosion wear behaviour of sputterdeposited Cr-based coatings (Ed. DimigenH.) In Proceedings of Euromat 99 on Surface engineering, 2000, Vol. 11, pp. 65–70 (Wiley VCH, Weinheim).
17.
Aldrich-SmithG.Corrsion-wear of hard coated 316L austenitic stainless steel. PhD Thesis, University of Leeds, 2000.
18.
DearnleyP. A.Aldrich-SmithG.Corrosion-wear mechanisms of hard coated austenitic 316L stainless steelsWear, 2004, 256 (5), 491–499.
