Sage Journals: Discover world-class research

Abstract

The friction behaviours of two types of diamond-like carbon coating (amorphous and monocrystalline) were studied under boundary lubrication. As lubricants, liquid paraffin with and without surfactant additives (stearic and oleic acids) were used as well as base mineral oil with viscosity corresponding to SAE 30. Tests were conducted on a ball-on-disc tribometer and on a tribometer where two rings were rubbing against each other. It was found that in all types of test the monocrystalline coating ensures minimal values of friction coefficient in a wider range of temperatures, whereas the amorphous coating has maximum values of friction coefficient compared with the monocrystalline coating and with the reference uncoated steel pair. This effect takes place for all lubricants studied. The observed experimental data can be explained by the strong orienting effect of the monocrystalline carbon coating on the structural order of molecules in boundary layers and correspondingly on their lubricating ability. The effect of the amorphous coating on molecular orientation in boundary layers is rather poor.

Keywords

friction coefficient boundary layers lubricating ability diamond-like carbon coatings molecular orientation structural order epitropic liquid crystals

Get full access to this article

View all access options for this article.

References

Levchenko

V. A.

The influence of modification surfaces on the properties of lubricants. In Proceedings of the Sixth International Conference on Lubricant Materials, Pleven, Bulgaria, 1987, pp. 51–52.

Levchenko

V. A.

Buyanovsky

I. A.

Matveenko

V. N.

Comparative researches of tribological properties of modified steel surfaces. In Proceedings of the International Tribology Conference, Brisbane, Australia, 6–9 December 1998, p. 86.

Cognard

Tribology and the liquid-crystalline state. In Proceedings of the 198th National Meeting of the American Chemical Society, Miami Beach, Florida, 1990, p. 47.

Levchenko

V. A.

Epitropic liquid crystals—a new liquid phase. J. Molecular Liquids, 2000, 85 (1–2), 197–210.

Buyanovsky

I. A.

The role of surface interactions in tribological process (in Russian). Chemistry Technol. Fuels Oils, Moscow, 1992, (11), 7–13.

Podgornik

Jacobson

Hogmark

DLC coating of boundary lubricated components—advantages of coating one of the contact surfaces rather than both or none. Tribology Int., 2000, 36, 843–849.

Gril

Patel

Tribological properties of diamond-like carbon and related materials. Diamond Related Mater., 1993, 2, 597–605.

Ronkainen

Varjus

Holmberg

Friction and wear properties in dry, water- and oil-lubricated DLC against alumina and DLC against steel contacts. Wear, 1998, 222, 120–128.

Jacobson

Hogmark

On the tribological character of boundary lubricated DLC coated components. In Boundary and Mixed Lubrication: Science and Applications (Eds Dowson

), 2002, pp. 337–345 (Elsevier, New York).

10.

Levchenko

V. A.

Matveenko

V. N.

Babaev

V. G.

Guseva

M. B.

The carbon film as a unique orienter for epitropic liquid crystals. In Proceedings of the 10th European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes, Nitrides and Silicon Carbide, Hilton Atrium, Prague, Czech Republic, 12–17 September 1999.

11.

Pitzer

K. S.

Clementi

Large molecules in carbon vapor. J. Am. Chem. Soc., 1959, 81, 4477–4485.

12.

Russ. Patent 2230238 RU, 2004.

13.

Levchenko

V. A.

Buyanovsky

I. A.

Matveenko

V. A.

Influence of diamond-like coating-orientant on antifriction properties of lubricant environments at boundary greasing. J. Friction Wear, 2000, 6, 658–663.

14.

Buyanovsky

I. A.

Levchenko

V. A.

Ignatieva

Z. V.

Matveenko

V. A.

Structure ordering in boundary lubricating layers. In Proceedings of the International Conference on Tribofatigue, Ternopol, Ukraine, 2002, pp. 590–595.

15.

Kragelsky

I. V.

Dobychin

M. N.

Kombalov

V. S.

Friction and Wear. Calculation Methods, 1982, pp. 400–402 (Pergamon, Oxford).

16.

Chichinadze

A. V.

(Ed.) Principles of Tribology (Friction, Wear and Lubrication) (in Russian), 2001, pp. 309–315 (Mashinostroenie, Moscow).

17.

Buyanovsky

I. A.

Ignatieva

Z. V.

Zaslavsky

R. N.

Tribochemistry of boundary lubrication processes. Surface modification and mechanisms. In Friction, Stress and Reaction Engineering (Eds Totten

G. E.

Hong

), 2004, pp. 353–404 (Marcel Dekker, New York).

Influence of carbon coatings on lubricating properties of boundary layers

Abstract

Abstract

Keywords

Get full access to this article

References