The investigation of basic variability aspects in face-milled surfaces regarding roughness and waviness (surface texture) for various cutting conditions is attempted in this note. The inhomogeneity of the machined steel specimens surfaces is modelled according to the Fisher-Pearson statistical system. Models are developed by regression analysis for waviness and roughness interdependence exhibiting very high correlation coefficients.
PetropoulosP. G.The effect of feed rate and tool nose radius on the roughness of oblique finish turned surfacesWear, 1973, 23 (1), 299–310.
3.
WhitehouseD. J.Handbook of Surface Metrology, 1996 (Institute of Physics Publishing for Rank Taylor-Hobson, Bristol).
4.
PetropoulosG.PandazarasC.StamosI. Developing predictive models between selected texture parameters of turned surfaces.J. Balkan Tribol. Assoc., 1999, 5 (3), 156–170.
5.
PetropoulosP. G.Testing the homogeneity of the roughness on oblique finish turned surfacesWear, 1973, 24, 147–152.
6.
SundaramR. M.LambertB. K.Surface roughness variability of AISI 4140 steel in fine turning using carbide toolsInt. J. Prod. Res., 1979, 17, 249–258.
7.
MontgomeryD.AltintasY.Mechanism of cutting force and surface generation in dynamic millingTrans. ASME, J. Engng for Industry, 1991, 113, 160–168.
8.
DinizA. E.FilhoJ. C.Influence of the relativepositions of tooland workpiece on tool life, tool wear and surface finish in the face milling process, Wear, 1999, 232, 67–75.
9.
TsaoC.-C.ChenW.-C.Effects of cutting parameters on the scallop size during the milling processesJ. Mater. Processing Technol., 1997, 72, 208–213.
