Transient elastohydrodynamic analysis of an overhead cam/tappet contact

Abstract

The friction in automotive engines is mainly caused by three components: the engine bearings, the piston-ring assembly and the valve train. In order to improve reliability and performance and to reduce fuel consumption, manufacturers have to reduce engine friction. To do this a better understanding of these components is necessary. In this paper, the valve train is studied for a direct-acting system. A transient elastohydrodynamic lubrication analysis is developed. The model includes the variation in the radius of curvature of the cam, the variation in the hydrodynamic velocity and the variation in the load. The film thickness is calculated as a function of time and space. In order to reduce the computing time, multi-grid and multi-level multi-integration techniques are used. Results show squeeze-film effects and ejection of lubricant on hydrodynamic speed reversion.

Keywords

elastohydrodynamic lubrication transient analysis squeeze effect valve train internal combustion engine multi-grid techniques

Get full access to this article

View all access options for this article.

References

Muller

The effect of lubrication on cam and tappet performance

Motor Tech. Z., 1966, 27 (2), 58-61 (MIRA Translation, 27/66).

Dyson

EHD lubrication and wear of cams bearing against cylindrical tappets. SAE paper 770018, 1977.

Dyson

Kinematics and wear patterns of cam and finger follower automotive valve gear

Tribology Int., June 1980, 13 (3), 121–132.

Lim

C. E.

Evans

H. P.

Snidle

R. W.

Kinematics and lubrication conditions at cam contact in a centrally pivoted cam-finger follower. SAE paper 830309, 1983, pp. 45–52.

A numerical analysis for the transient elastohydrodynamic process of a cam-tappet pair in I.C. engine

Trans. ASME, J Tribology, July 1989, 111, 413–417.

Dowson

Taylor

C. M.

Zhu

A transient elastohydrodynamic lubrication analysis of a cam and follower

J. Appl. Physics, 1992, 25, 313–320.

Hooke

C.J.

The minimum film thickness in lubricated line contacts during a reversal of entrainment—isoviscous behaviour

Proc. Instn Mech. Engrs, Part C, Journal of Mechanical Engineering Science, 1992, 206 (C5), 337–345.

Hooke

C. J.

The minimum film thickness in line contacts during a reversal of entrainment

Trans. ASME, J. Tribology, January 1993, 115, 191–199.

Venner

C. H.

Lubrecht

A. A.

Transient analysis of surface features in an EHL line contact in the case of sliding

Trans. ASME, J. Tribology, April 1994, 116, 186–193.

10.

Reynolds

On the theory of lubrication and its application to Mr Beauchamp Tower's experiments, including an experimental determination of the viscosity of olive oil

Phil. Trans. R. Soc. Lond., 1886, 177, 157–234.

11.

Roelands

C. J. A.

Correlational aspects of the viscosity-temperature-pressure relationship of lubricating oils

PhD thesis, Technische Hogeschool Delft, 1966, 259 pp.

12.

Dowson

Higginson

G. R.

Elasto-Hydrodynamic Lubrication, 1966, 236 pp. (Pergamon, Oxford).

13.

Hamrock

B. J.

Dowson

Isothermal EHD lubrication of points contacts. Part I: Theoretical formulation

Trans. ASME, J. Lubric. Technol., 1976, 98 (2), 223–229.

14.

Brandt

Lubrecht

A. A.

Multilevel matrix multiplication and fast solution of integral equations

J. Comput. Physics, 1990, 90 (2), 348–370.

15.

Lubrecht

A. A.

Venner

C. H.

Elastohydrodynamic lubrication of rough surfaces

Proc. Instn Mech. Engrs, Part J, Journal of Engineering Tribology, 1999, 213 (J5), 397–404.

16.

Kaneta

Sakai

Nishikawa

Optical interfero-metric observations of the effects of a bump on point contact EHL

Trans. ASME, J. Tribology, 1992, 114, 779–784.

17.

Chevalier

Lubrecht

A. A.

Cann

P. M. E.

Colin

Dalmaz

Film thickness in starved EHL point contacts

Trans. ASME, J. Tribology, January 1998, 120, 126–133.