A review of recent and current research on the control of fluid power systems is presented. Strengths and weaknesses of different schemes for control at both the component and system level are identified. It is argued that the selection and tuning of the controller is a critical part of system design and that simulation has an essential role to play in this process.
ConwayH. G.Some notes on the origins of mechanical servo mechanisms. Trans. Newcomen Soc., 1953–55, 29, 55–75.
2.
PippengerJ. J.Fluid Power—The Hidden Giant, 1992, pp. 31 et seq. (Amalgam Publishing, New York).
3.
BurrowsC. R.Fluid Power Servomechanisms, 1972 (Van Nostrand Reinhold, New York).
4.
BellR.de PenningtonA.Active compensation of lightly damped electrohydraulic cylinder drives using derivative signals. Proc. Instn Mech. Engrs, 1969–70, 184, Pt 1(4), 83–94.
5.
de PenningtonA.'t MannetjeJ. J.BellR.The modelling of electrohydraulic control valves and its influence on the design of electrohydraulic drives. Proc. Instn Mech. Engrs, J. Mech. Engng Sci., 1974, 16 (3), 196–204.
6.
de PenningtonA.MarslandD. W.BellR.The improvement of the accuracy of electrohydraulic cylinder drives for NC machine tools by the use of active feedback compensation. In Twelfth International Conference onMachine Tool Design and Research, September 1971, pp. 199–205.
7.
WhitingI. M.CottellN. P.Programmable servo control—a new approach. In Fourth Scandinavian International Conference onFluid Power, Tampere, Finland, 26–29 September 1995, pp. 204–217.
8.
DoebelinE. O.Control System Principles and Design, 1985, pp. 386–388 (John Wiley, Chichester).
9.
PaoluzziR.ZarottiL. G.FerrettiG.Multiple hybrid control of pump displacement. In Fourth Scandinavian International Conference onFluid Power, Tampere, Finland, 26–29 September 1995, pp. 605–617.
10.
McAllisterJ.The control of cruciform testing systems using opposed pairs of servo-hydraulic cylinders. In Innovations of Fluid Power, Proceedings of Seventh Bath International Fluid Power Workshop (Eds BurrowsC. R.EdgeK. A.), 1995, pp. 311–320 (Research Studies Press).
11.
LeppänenI.HalmeA.LehtinenH.Control of the hydraulic system of a walking machine MECANT. In Proceedings of Fourth Scandinavian International Conference on Fluid Power, Tampere, Finland, 26–29 September, 1995, 190–203.
12.
PlummerA. R.VaughanN. D.Discrete-time identification for electrohydraulic servo systems. Proc. Instn Mech Engrs, Part I, 1995, 209 (I3), 165–177.
13.
MaréJ.-C.LaffitteJ.-M.A study of the different pole-placement strategies for position control of hydraulic actuators. In Proceedings of Fourth Scandinavian International Conference on Fluid Power, Tampere, Finland, 26–29 September 1995, pp. 147–159.
14.
VaughanN. D.PlummerA. R.Some issues in pole-placement control of electrohydraulic servos. In Computers in Fluid Power, Proceedings of Third Bath International Fluid Power Workshop (Eds BurrowsC. R.EdgeK. A.), 1991, pp. 6–29 (Research Studies Press).
15.
IonnidisI.NguyenT.Microcomputer-controlled servo-pneumatic drives. In Seventh International Fluid Power Symposium, 16–18 September 1986, pp. 155–164.
16.
RichardE.ScavardaS.Non-linear control of a pneumatic servodrive. In Fluid Power Components and Systems, Proceedings of the Second Bath International Fluid Power Workshop (Eds BurrowsC. R.EdgeK. A.), 1990, pp. 59–75 (Research Studies Press).
17.
SesmatS.ScavardaS.Lin-ShiX.Verification of electropneumatic servovalve size using non-linear control theory applied to cylinder position tracking. In Fourth Scandinavian International Conference onFluid Power, Tampere, Finland, 26–29 September 1995, pp. 504–513.
18.
KawakamiY.MasudaY.KawaiS.Some considerations on the position control of pneumatic cylinders. InFluid Power, Proceedings of Second JHPS International Symposium on Fluid Power (Ed. MaedaT.), 1993, pp. 563–568 (E. & N. Spon, London).
19.
VirvaloT.Improving the use of the stroke of a pneumatic servo cylinder. In Fourth Scandinavian International Conference onFluid Power, Tampere, Finland, 26–29 September 1995, pp. 528–544.
20.
BourdatS.RichardE.ScavardaS.A modified linear reduced observer for a pneumatic servodrive. In Fluid Power Systems, Modelling and Control, Proceedings of Fourth Bath International Fluid Power Workshop (Eds BurrowsC. R.EdgeK. A.), 1992, pp. 357–371 (Research Studies Press).
21.
KobayashiK.SatoS.A study on acceleration waveform control of an electrohydraulic servo system using linear-model-following control. InFluid Power, Proceedings of Second JHPS International Symposium on Fluid Power (Ed. MaedaT.), 1993, pp. 619–624 (E. & N. Spon, London).
22.
EgnerM.Discrete non-linear control of electro-hydraulic feed drives—theoretical and practical results. In Proceedings of Seventh International Symposium on Fluid Power, 16–18 September 1986, pp. 219–229.
23.
GunnarssonS.KrusP.LQG control of a flexible mechanical structure using hydraulic actuators. In Modelling and Simulation, Proceedings of Sixth Bath International Fluid Power Workshop (Eds BurrowsC. R.EdgeK. A.), 1994, pp. 280–294 (Research Studies Press).
24.
MattilaJ.VirvaloT.Multivariable control for damping oscillations of flexible pneumatic servodrive. In Fourth Scandinavian International Conference onFluid Power, Tampere, Finland, 26–29 September 1995, pp. 514–527.
25.
LenneviJ.PalmbergJ.-O.Application and implementation of LQ design method for the velocity control of hydrostatic transmissions. Proc. Instn Mech. Engrs, Part I, 1995, 209 (I4), 255–268.
26.
ZeigerG.AkersA.Optimal control of an axial piston pump. In Proceedings of Seventh International Symposium on Fluid Power, 16–18 September 1986, pp. 57–64.
27.
LinS. J.AkersA.Optimal control theory applied to pressure-controlled axial piston pump design. Trans. ASME, J. Dynamic Systems, Measmt and Control, September 1990, 112, 475–481.
28.
FriedlandB.Control System Design—An Introduction to State Space Methods, 1986 (McGraw-Hill, London).
29.
Anon.MATLAB Control Systems Toolbox User's Guide, 1993 (The Maths Works Inc.).
30.
BackéW.Recent research projects in hydraulics. InFluid Power, Proceedings of Second JHPS International Symposium on Fluid Power (Ed. MaedaT.), 1993, pp. 3–27 (E. & N. Spon, London).
31.
PlummerA. R.Non-linear acceleration control of an electro-hydraulic actuator. In Innovations in Fluid Power, Proceedings of Seventh Bath International Fluid Power Workshop (Eds BurrowsC. R.EdgeK. A.), 1995, pp. 133–148 (Research Studies Press).
32.
WattonJ.A pragmatic CAD approach to optimum design of an electrohydraulic motor drive utilising programmable servo control card technology. In Drives and Controls 1996 Exhibition and Conference, Session 5: Fluid Power—Hydraulics and Pneumatics, Telford, 5–7 March 1996.
33.
RichardE.ScavardaS.Comparison between linear and non-linear control of an electropneumatic servodrive. Trans. ASME, J. Dynamic Systems, Measmt and Control, June 1996, 118, 245–252.
34.
PuJ.MooreP. R.HarrisonR.WestonR. H.A study of gain-scheduling method for controlling the motion of pneumatic servos. In Modelling and Simulation, Proceedings of Sixth Bath International Fluid Power Workshop (Eds BurrowsC. R.EdgeK. A.), 1994, pp. 193–210 (Research Studies Press).
35.
VirtanenA.The design of state controlled hydraulic position servo system. In Proceedings of Third Scandinavian International Conference on Fluid Power, Linköping, Sweden, 25–26 May 1993, pp. 193–206.
36.
VaughanN. D.WhitingI. M.Microprocessor control applied to a non-linear electrohydraulic position control system. In Proceedings of Seventh International Fluid Power Symposium, 16–18 September 1986, pp. 219–229.
37.
DaleyS.Application of a fast self-tuning control algorithm to a hydraulic test rig. Proc. Instn Mech. Engrs, Part C, 1987, 201 (C4), 285–295.
38.
WuH.-W.LeeC.-B.Self-tuning adaptive speed control of a pump/inverter-controlled hydraulic motor system. Proc. Instn Mech. Engrs, Part I, 1995, 209 (I2), 101–114.
39.
PlummerA. R.VaughanN. D.Robust adaptive control for hydraulic servosystems. Trans. ASME, J. Dynamic Systems, Measmt and Control, June 1996, 118, 237–244.
40.
Le QuocS.XiongY. F.ChengR. M. H.Realisation of a pole-placement adaptive control in a hydraulic position system. InFLUCOME 94, Toulouse, France, 29 August-1 September 1994, pp. 119–124.
41.
ÖzsoyC.KuralA.KuzucuA.Pole-placement position control of a hydraulic robot arm. Proc. Instn Mech. Engrs, Part I, 1994, 208(I3), 149–156.
42.
BouhalA.RichardE.ScavardaS.ThomassetD.The use of adaptive generalised predictive controller in pressure regulation. In Circuit, Component and System Design, Proceedings of Fifth Bath International Fluid Power Workshop (Eds BurrowsC. R.EdgeK. A.), 1995, pp. 315–333 (Research Studies Press).
43.
EdgeK. A.FigueredoK. R. A.An adaptively controlled electrohydraulic servo-mechanism. Part 1: Adaptive controller design, Part 2: Implementation. Proc. Instn Mech. Engrs, Part B, 1987, 201 (B3), 175–189.
44.
ThollotJ.Adaptive control of an hydraulic cylinder—a system performance based approach. In Innovations in Fluid Power, Proceedings of Seventh Bath International Fluid Power Workshop (Eds BurrowsC. R.EdgeK. A.), 1995, pp. 161–176 (Research Studies Press).
45.
EdgeK. A.de AlmeidaF. G.Decentralised adaptive control of a directly driven hydraulic manipulator. Part 1: Theory, Part 2: Experiment. Proc. Instn Mech. Engrs, Part I, 1995, 209 (I3), 191–205.
46.
HuF.EdgeK. A.An adaptive load-sensing hydrostatic transmission system. In Proceedings of Fourth Scandinavian International Conference on Fluid Power, Tampere, Finland, 26–29 September 1995, pp. 1049–1062.
47.
NikiforukP. N.UkrainetzP. R.ZhangH.Adaptive control of MIMO electrohydraulic servosystem. InFluid Power, Proceedings of Second JHPS International Symposium on Fluid Power (Ed. MaedaT.), 1993, pp. 315–320 (E. & N. Spon, London).
48.
StotenD. P.Implementation of minimal control synthesis on a servo-hydraulic testing machine. Proc. Instn Mech. Engrs, Part I, 1992, 206 (I3), 189–194.
49.
BeardG. S.StotenD. P.Energy efficient pressure control of a hydraulic actuator circuit using MCS adaptive control. In UKACC International Conference: CONTROL 96, Exeter, 2–5 September 1996.
50.
ArikiK.YamamotoA.Application of the model reference adaptive control with the constant trace algorithm to a pneumatic servo. In Proceedings of First JHPS International Symposium on Fluid Power (Ed. YamaguchiA.), Tokyo, Japan, 1989, pp. 313–320.
51.
OyamaO.Model adaptive control of on-off controlled pneumatic servosystem using high speed solenoid valve. InFLUCOME 94, Toulouse, France, 29 August-1 September 1994, pp. 59–62.
52.
NakaoY.UrataE.Adaptive feedforward control of electro-hydraulic servo system with inverse transfer function and ZPETC. InFLUCOME 94, Toulouse, France, 29 August-1 September 1994, pp. 101–106.
53.
AndersenT. O.ConradF.HansenP. E.ZhouJ. J.A novel adaptive control scheme for hydraulic actuator motion systems. In Modelling and Simulation, Proceedings of Sixth Bath International Fluid Power Workshop (Eds BurrowsC. R.EdgeK. A.), 1994, pp. 177–192 (Research Studies Press).
54.
ScavardaS.Some theoretical aspects and recent developments in pneumatic positioning systems. InFluid Power, Proceedings of Second JHPS International Symposium on Fluid Power (Ed. MaedaT.), 1993, pp. 29–48 (E. & N. Spon, London).
55.
DorfR. C.BishopR. H.Modern Control Systems, 7th edition, 1995, pp. 648 et seq. (Addison-Wesley, London).
56.
VaughanN. D.GambleJ.Sliding mode control of a proportional solenoid valve. In Fluid Power Systems Modelling and Control, Proceedings of Fourth Bath International Fluid Power Workshop (Eds BurrowsC. R.EdgeK. A.), 1992, pp. 95–107 (Research Studies Press).
57.
YouZ.BurtonR. T.UkrainetzP. R.Feasibility study of sliding mode control in the operation of a variable displacement axial piston pump. InFluid Power, Proceedings of Second JHPS International Symposium on Fluid Power (Ed. MaedaT.), 1993, pp. 267–272 (E. & N. Spon, London).
58.
HabibiS. R.RichardsR. J.Computed-torque and variable-structure multi-variable control of a hydraulic industrial robot. Proc. Instn Mech. Engrs, Part I, 1991, 205 (I2), 123–140.
59.
BeckerU.The behaviour of a position controlled actuator with switching valves. In Proceedings of Fourth Scandinavian International Conference on Fluid Power, Tampere, Finland, 26–29 September 1995, pp. 160–167.
60.
NoritsuguT.WadaT.Adaptive variable structure control of pneumatically actuated robot. In Proceedings of First JHPS International Symposium on Fluid Power (Ed. YamaguchiA.), 1989, pp. 435–442.
61.
BouriM.ThomassetD.RichardE.ScavardaS.Non-linear sliding mode control of an electropneumatic servodrive. In Innovations in Fluid Power, Proceedings of Seventh Bath International Fluid Power Workshop (Eds BurrowsC. R.EdgeK. A.), 1995, pp. 201–220 (Research Studies Press).
62.
SurgenorB.VaughanN. D.UebingM.Continuous sliding mode control of a pneumatic positioning system. In Design and Performance, Proceedings of Eighth Bath International Fluid Power Workshop (Eds BurrowsC. R.EdgeK. A.), 1996, pp. 270–285 (Research Studies Press).
63.
PichéR.PohjolainenS.VirvaloT.Design of robust controllers for position servos using H-infinity theory. Proc. Instn Mech. Engrs, Part I, 1991, 205(I4), 299–306.
64.
PlummerA. R.FordK. J.Control system design for an electro-hydraulic feel force generator. In Circuit, Component and System Design, Proceedings of Fifth Bath International Fluid Power Workshop (Eds BurrowsC. R.EdgeK. A.), 1993, pp. 400–413 (Research Studies Press).
65.
PalmeriP. S.MoschettiA.GortanL.H-infinity control for Lancia Thema full active suspension system. In New Developments in Vehicle Dynamics, Simulation and Suspension Systems, SAE SP-1074, 1995, paper 950583.
66.
DonneM. S.TilleyD. G.RichardsW.The use of multi-objective parallel genetic algorithms to aid fluid power system design. Proc. Instn Mech. Engrs, Part I, 1995, 209 (I1), 53–61.
67.
HandroosH. M.HalmeJ. S.Genetic algorithm based on self-learning control of pneumatic servos. In Innovations in Fluid Power, Proceedings of Seventh Bath International Fluid Power Workshop (Eds BurrowsC. R.EdgeK. A.), 1995, pp. 187–200 (Research Studies Press).
68.
LiuP.DransfieldP.Intelligent control of air servodrives using neural networks. InFluid Power, Proceedings of Second JHPS International Symposium on Fluid Power (Ed. MaedaT.), 1993, pp. 743–748 (E. & N. Spon, London).
69.
KleinA.BackéW.An intelligent optimisation of a state loop controller with fuzzy-set-logic. In Circuit, Component and System Design, Proceedings of Fifth Bath International Fluid Power Workshop (Eds BurrowsC. R.EdgeK. A.), 1995, pp. 381–399 (Research Studies Press).
70.
ShihM.-C.LiawS.-M.Hydraulic servocylinder position control using a fuzzy logic controller. InFluid Power, Proceedings of Second JHPS International Symposium on Fluid Power (Ed. MaedaT.), 1993, pp. 279–284 (E. & N. Spon, London).
71.
NiemeläE.VirvaloT.Usage of fuzzy logic in hydraulic servo. In Proceedings of Fourth Scandinavian International Conference on Fluid Power, Tampere, Finland, 26–29 September, pp. 119–132.
72.
SanoM.FujitaT.An effective tuning method of fuzzy controllers in pneumatic servosystem. InFluid Power, Proceedings of Second JHPS International Symposium on Fluid Power (Ed. MaedaT.), 1993, pp. 731–736 (E. & N. Spon, London).
73.
NiemeläE.VirvaloT.Fuzzy logic control in a joystick operated hydraulic crane. InFluid Power, Proceedings of Second JHPS International Symposium on Fluid Power (Ed. MaedaT.), 1993, pp. 613–617 (E. & N. Spon, London).
74.
SanadaK.KitagawaA.PingdongW.An application of a neural network to adaptive control of a servo system. InFluid Power, Proceedings of Second JHPS International Symposium on Fluid Power (Ed. MaedaT.), 1993, pp. 303–308 (E. & N. Spon, London).
75.
NewtonD. A.Application of a neural network controller to control a rotary drive system with high power efficiency. In Innovations in Fluid Power, Proceedings of Seventh Bath International Fluid Power Workshop (Eds BurrowsC. R.EdgeK. A.), 1995, pp. 41–54 (Research Studies Press).
76.
NewtonD. A.Design and implementation of a neural network controlled electrohydraulic drive. Proc. Instn Mech. Engrs, Part I, 1994, 208 (I1), 31–42.
77.
ShihM.-C.LeeK.-C.Hydraulic servo cylinder position control using a hybrid neuro-fuzzy controller. In Proceedings of Fourth Scandinavian International Conference on Fluid Power, Tampere, Finland, 26–29 September 1995, pp. 105–118.
78.
WattonJ.Microcomputers in fluid power—problem solvers or problem generators. In Proceedings of First JHPS International Symposium on Fluid Power (Ed. YamaguchiA.), 1989, pp. 33–40.
79.
JanssonA.KrusP.PalmbergJ.-O.Decoupling of response and pressure level in a hydraulic actuator. In Fluid Power Systems Modelling and Control, Proceedings of Fourth Bath International Fluid Power Workshop (Eds BurrowsC. R.EdgeK. A.), 1992, pp. 260–275 (Research Studies Press).
