For a test-case central heating plant, modelled as a non-linear neutral time delay system, a metaheuristic proportional-integral-derivative (PID) control scheme is proposed to control the temperature of the room using as a sole actuatable input the energy supplied to the boiler. The control scheme is based on a neutral time delay description of the linearized approximation of the process. The linearization is tested using a Euclidian norm type of error, with emphasis on the performance variable of the system, to show that it is an accurate approximation of the original process for a wide range of variables of the plant. The performance of the closed-loop system is examined via simulation experiments.
AndersenK. K.PoulsenH. ‘Building integrated heating systems.’ International Building Performance Simulation Association Conference, Kyoto, Japan, 13-15 September 1999.
2.
CrawleyD. B.LawrieL. K.WinkelmannF. C.BuhlW. F.HuangY. J.PedersenC. O.StrandR. K.LiesenR. J.FisherD. E.WitteM. J.GlazerJ.‘EnergyPlus: Creating a new generation building energy simulation program.’Energy and Buildings33 (4) (2001): 319–331
3.
AasemE. O.Practical simulation of buildings and air-conditioning systems in the transient domain PhD Dissertation, University of Strathclyde, Glasgow, UK, 1993.
MalikM. N.AfzalM.TariqG. F.AhmedN.‘Mathematical modeling and computer simulation of transient flow in centrifuge cascade pipe network with optimizing techniques.’Computers and Math. with Applic.36 (4) (1998): 63–76
6.
CaiW.Nonlinear dynamics of thermal-hydraulic networks PhD Dissertation, University of Notre Dame, Indiana, USA, 2006.
7.
ArlsanturkC.OzgucA. F.‘Optimization of a central-heating radiator.’Appl. Energy83 (11) (2006): 1190–1197
8.
HansenL. H.Stochastic modeling of central heating systems PhD Dissertation, Technical University of Denmark, Lyngby, Denmark, 1997.
9.
Zaheer-UddinM.ZhenyG. R.ChoS.-H.‘Optimal operation of an embedded-piping floor heating system with control input constraints.’Energy Conversion and Mgmt38 (7) (1994): 713–725
10.
LiaoZ.ParandF.‘Develop a dynamic model of gas and oil burned boilers for optimization of boiler control in central heating systems.’ Canadian Conference onBuilding Energy Simulation, Montreal, Canada, 11-13 September 2001.
11.
ZanobiniA.LuculanoG.PapiniA. ‘Central heating control: a new technique to gauge room temperature.’ IEEE Instrumentation and Measurement Technology Conference, St Paul, Minnesota, 18-21 May 1998.
12.
MendiF.BoranK.KulekciM. K.‘Fuzzy controlled central heating system.’Int. J. Energy Res.26 (15) (2002): 1313–1322
13.
MorelN.BauerM.El-KhouryM.KraussJ.‘NEUROBAT: A predictive and adaptive heating control system using artificial neural networks.’Int. J. Solar Energy21 (2001): 161–201
14.
KouvakasN. D.KoumboulisF. N.ParaskevopoulosP. N.‘Modeling and control of a neutral time delay test case central heating system.’ 6th WSEAS International Conference onCircuits, systems, electronics, control, and signal processing, Cairo, Egypt, 29-31 December 2007.
15.
KoumboulisF. N.KouvakasN. D.ParaskevopoulosP. N.‘Dynamic disturbance rejection controllers for neutral time delay systems with application to a central heating system.’ International Conference onModeling, identification, and control, Shanghai, People's Republic of China, 29 June-2 July 2008.
KoumboulisF. N.TzamtziM. P.‘A metaheuristic approach for controller design of multivariable processes.’ 12th IEEE Conference onEmerging technologies and factory automation, Patras, Greece, 25-28 September 2007.
18.
ÅströmK. J.HagglundT.PID controllers: theory, design and tuning, (Instrument Society of America, North Carolina, USA1995)
19.
HerreroJ. M.BlascoX.MartinezM.SalcedoJ. V. ‘Optimal PID tuning with genetic algorithms for non-linear process models.’ 15th Triennial World Congress of the International Federation of Automatic Control, Barcelona, Spain, 21-26 July 2002.
20.
GuK.KharitonovV. L.ChenJ.Stability of time delay systems, (Birkhäuser Boston, Massachusetts2003)
