Polymer extrusion is a complex process and the availability of good dynamic models is key for improved system operation. Previous modelling attempts have failed adequately to capture the non-linearities of the process or prove too complex for control applications. This work presents a novel approach to the problem by the modelling of extrusion viscosity and pressure, adopting a grey box modelling technique that combines mechanistic knowledge with empirical data using a genetic algorithm approach. The models are shown to outperform those of a much higher order generated by a conventional black box technique while providing insight into the underlying processes at work within the extruder.
ReberD. H.LynnR. E.FreehE. J.A mathematical model for predicting dynamic behaviour of a plasticating extruderPolym. Engng and Sci., 1973, 13 (5), 346–356.
2.
TadmorZ.LipshitzS. D.LavieR.Dynamic model of a plasticating extruderPolym. Engng and Sci., 1974, 14 (2), 112–119.
3.
CoxA. P.D.FennerR. T.Melting performance in the single screw extrusion of thermoplasticsPolym. Engng and Sci., 1980, 20 (8), 562–571.
4.
MudalamaneR.BigioD. I.Process variations and the transient behavior of extrudersAICHE J., 2003, 49 (12), 3150–3160.
5.
KochharA. K.ParnabyJ.Comparison of stochastic identification techniques for dynamic modelling of plastics extrusion processesProc. IMechE, 1978, 192, 299–309.
6.
DormeierS.Digital temperature control - a way to improve the extrusion process. Annual Technical Conference - ANTEC 1979, New Orleans, Society of Plastics Engineers, 1979.
7.
ChiuS.LinC.Applying the constrained minimum variance control theory on in-line viscosity control in the extrusion molding processJ. Polym. Res., 1998, 5 (3), 171–175.
8.
PrevidiF.SavaresiS. M.PanarottoA.Design of a feedback control system for real-time control of flow in a single-screw extruderControl Engng Pract., 2006, 14 (9), 1111–1121.
9.
ChiuS.PongS.In-line viscosity control in an extrusion process with a fuzzy gain scheduled PID controllerJ. Appl. Polym. Sci., 1999, 74 (3), 541–555.
MaddockB. H.Measurement and analysis of extruder stabilitySPE J., 1964, 20, 1277–1283.
12.
DerezinskiS. J.Dynamic torque of a single screw extruder. Annual Technical Conference - ANTEC 2001, Dallas, Society of Plastics Engineers, 2001.
13.
TadmorZ.KleinI.Fundamentals of plasticating extrusion, 1970 (Van Nostrand Reinhold, New York).
14.
GitschnerH.LutterbackJ.Influences of barrel wall temperature on melt throughput fluctuations in the single screw extruderKunststoffe, 1984, 74 (1), 7–8.
15.
SchneiderH.-P.Improved efficiency and quality - trends in PVC profile and pipe extrusionKunststoffe Plast. Eur., 2000, 90 (10), 42–45.
LiK.ThompsonS.PengJ.Modelling and prediction of NOx emission in a coal-fired power generation plantControl Engng Pract., 2004, 12 (6), 707–723.
18.
PengJ.-X.NOx emission modelling from coal-fired power generation boilers. PhD Thesis, Queen's University Belfast, 2003.
19.
McAfeeM.ThompsonS.McNallyG. M.In-process viscosity monitoring for extrusion control. Annual Technical Conference - ANTEC 2004, Chicago, Society of Plastics Engineers, 2004.
20.
FerryJ. D.Viscoelastic properties of polymers, 1980 (Wiley, New York).
21.
KimY. S.ChungC. I.LaiS. Y.HyunK. S.Frictional behavior of polyethylenes with respect to density and melting characteristics. Annual Technical Conference - ANTEC 1996, Indianapolis, Society of Plastics Engineers, 1996.
22.
SpaldingM. A.HyunK. S.CohenB. R.Experimental study of the frictional and viscous forces responsible for solids conveying and melting in single-screw plasticating extruders. Annual Technical Conference - ANTEC 1997, Toronto, Society of Plastics Engineers, 1997.
23.
LiK.PengJ.-X.IrwinG. W.A fast nonlinear model identification methodIEEE Trans. Autom. Control, 2005, 50 (8), 1211–1216.
