A review of recent and current research on individual metering fluid power systems is presented. An overview of different systems and their pros and cons is given. General challenges related to independent metering fluid power systems are discussed. The major choices in the design of these systems are the hardware layout and the control strategy. The evolution of existing independent metering fluid power systems from the 1970s until the present day is also presented.
LiuS.YaoB., ‘Energy-saving control of single-rod hydraulic cylinders with programmable valves and improved working mode selection.’ -saving control of single-rod hydraulic cylinders with programmable valves and improved working mode selection. Proceedings of the 49th National Conference on Fluid power, Las Vegas, USA 2002, pp. 81–91.
2.
KongX.ShanG.YaoJ.GaoY., ‘Study on experiment and modeling for the multifunctional integrated valve control system.’ In Proceedings of the 2004 lnternational Conference on Intelligent mechatronics and automation, Chengdu, China 2004, pp. 455–459.
3.
ShenoudaA.BookW., ‘Energy saving analysis using a four-valve independent metering configuration controlling a hydraulic cylinder.’ In Proceedings of the 2005 SAE Commercial Vehicle Engineering Conference, Rosemont, Illinois, USA, November 2005, Session on Simulation and optimization, Part 1 of 3: System level (SAE International, Warrendale, PA).
4.
ErikssonB., Control strategy for energy efficient fluid power actuators Lic Thesis, LiU-TryckLinköping2007 ISBN 978-91-85895-06-9.
5.
AndersenT. O.MünzerM. E.HansenM. R., ‘Evaluations of control strategies for separate meter-in separate meter-out hydraulic boom actuation in mobile applications.’ In Proceedings of the 17th International Conference on Hydraulics and pneumatics, Ostrava, Czech Republic, June 2001.
6.
NielsenB., Controller development for a separate meter-in separate meter-out fluid power valve for mobile applications PhD Thesis, Aalborg UniversityDenmark2005.
7.
JanssonA.PalmbergJ.-O., ‘Separate controls of meter-in and meter-out orifices in mobile hydraulic systems.’ In Proceedings of the International Off-Highway and Powerplant Congress and Exposition, Milwaukee, Wisconsin, USA 1990 (SAE InternationalWarrendale, PA).
8.
ElfvingM.PalmbergJ.-O., ‘Distributed control of fluid power actuators –decoupled chamber pressure controlled cylinder.’ In Proceedings of the 9th Bath International Fluid Power Workshop, September 1996.
9.
ErikssonB., Optimal force control to improve hydraulic drives Lic Thesis, KTHSweden1996, ISSN 1400-1179.
10.
MattilaJ.VirvaloT., ‘Energy-efficient motion control of a hydraulic manipulator.’ -efficient motion control of a hydraulic manipulator. Proceedings of IEEE International Conference on Robotics and automation, ICRA '00, San Francisco, California, USA 2000 vol. 3, pp. 3000–3006.
11.
HuH.ZhangQ.AlleyneA., ‘Multi-function realization of a generic programmable e/h valve using flexible control logic.’ -function realization of a generic programmable e/h valve using flexible control logic. Proceedings of the 5th International Conference on Fluid power transmission and control, Hangzhou, China 2001, pp. 107–110 (International Academic Publishers, Beijing).
12.
PfaffJ. L., ‘Distributed electro-hydraulic systems for telehandlers.’ In Proceedings of the 2005 National Conference on Fluid power, Las Vegas, USA 2005, pp. 779–784.
13.
ShenoudaA., Quasi-static hydraulic control systems and energy savings potential using independent metering four-valve assembly configuration PhD Thesis, Georgia Institute of TechnologyUSA2006.
14.
TaborK. A., ‘A novel method of controlling a hydraulic actuator with four valve independent metering using load feedback.’ In Simulation and optimization: system level, component level, advanced technology/methodology, (SAE InternationalWarrendale, PA).
15.
YuanQ.LewJ. Y., ‘Modeling and control of two stage twin spool servo-valve for energy-saving.’ In Proceedings of the 2005 American Control Conference, Portland, Oregon, USA 2005, vol. 6, pp. 4363–4368.
16.
YaoJ.KongX.-D.ShanD.-S.GaoY.-J.HanD.ZhangQ., ‘Study on using a multifunctional integrated valve in controlling an asymmetric hydraulic system.’ In Proceedings of the 50th National Conference on Fluid power, Las Vegas, USA March 2005, pp. 585–594 (National Fluid Power AssociationMilwaukee, WI).
17.
LinjamaM.LaamanenA.VileniusM., ‘Is it time for digital hydraulics?’ In Proceedings of the 8th Scandinavian International Conference on Fluid power, Tampere, Finland 2003.
18.
LinjamaM.HuovaM.BoströmP.LaamanenA.SiivonenL.MorelL.WaldénM.VileniusM., ‘Design and implementation of energy saving digital hydraulic control system.’ In Proceedings of the 10th Scandinavian International Conference on Fluid power (Eds VileniusJ.KoskinenK. T.), TampereFinland, May 2007, pp. 341–359.
19.
LinjamaM.HuovaM.VileniusM., ‘On stabillity and dynamic characteristics of hydraulic drives with distributed valves.’ In Power transmission and motion control 2007 (Eds JohnstonD. N.PlummerA. R.), University of BathUK, 2007, pp. 67–79.
20.
LiuY.XuB.YangH.ZengD., ‘Simulation of separate meter in and separate meter out valve arrangement used for synchronized control of two cylinders.’ In Proceedings of the IEEE/ASME International Conference on Advanced intelligent mechatronics, AIM 2009, Singapore July 2009, pp. 1665–1670.
21.
KrusP., On load sensing fluid power systems - with special reference to dynamic properties and control aspects PhD Thesis, LiTH (The Institute of Technology at Linköping University), Sweden1988.
22.
LanttoB., On fluid power control with special reference to load-sensing systems and sliding mode control PhD Thesis, LiTH (The Institute of Technology at Linköping University), Sweden1994.
23.
DjurovicM.KeuperG.StachnikP., ‘Intelligentes Ölmanagement mit: EFM: Applikation und potentiale des elektrohydraulischen flow-matching am beispiel traktor.’ In Proceedings of 4. Kolloquium Mobilhydraulik, Braunschweig 2006.
24.
FeddeT.HarmsH. H., ‘An adaptive hydraulic system for mobile applications.’ In Proceedings of 5.IFK, Aachen, Germany 2006, vol. 3, pp. 95–106.
25.
MettäläK.DjurovicM.KeuperG.StachnikP., ‘Intelligent oil flow management with EFM.’ In Proceedings of the 10th Scandinavian International Conference on Fluid power (Eds VileniusJ.KoskinenK. T.), May 2007, vol. 3, pp. 25–34.
26.
AxinM.ErikssonB.PalmbergJ. O., ‘Energy efficient load adapting system without load sensing – design and evaluation.’ In Proceedings of the 11th Scandinavian International Conference on Fluid power, Linköping, Sweden 2009.
27.
FinzelR.HelduserS.JangD.-S., ‘Electro-hydraulic control systems for mobile machinery with low energy consumption.’ -hydraulic control systems for mobile machinery with low energy consumption. Proceedings of the 7th International Conference on Fluid power transmission and control, Hangzhou, China 2009, pp. 214–219.
28.
ErikssonB.PalmbergJ.-O., ‘How to handle auxiliary functions in energy efficient, single pump, flow sharing mobile systems.’ In Proceedings of the 6th International Fluid Power Conference 7.IFK (Ed. MurrenhoffH.), March 2010 vol. 1, pp. 65–78.
29.
RahmfeldR.IvantysynovaM., ‘Displacement controlled linear actuator with differential cylinder – a way to save primary energy in mobile machines.’ In Proceedings of the 5th International Conference on Fluid power transmission and control, ICFP, Hangzhou, China 2001, vol. 1, pp. 316–322.
30.
BergH.IvantysynovaM., ‘Design and testing of a robust linear controller for secondary controlled hydraulic drive.’Proc. IMechE, Part I: J. Systems and Control Engineering213 (5) (1999): 375–386 DOI:.
31.
HeybroekK.LarssonJ.PalmbergJ.-O., ‘Mode switching and energy recuperation in open-circuit pump control.’ In Proceedings of the 10th Scandinavian International Conference on Fluid power (Eds VileniusJ.KoskinenK. T.), May 2007, vol. 3, pp. 197–210.
32.
HeybroekK., Saving energy in construction machinery unsing displace- ment control hydraulics Lic Thesis, LiU-Tryck, LinköpingSweden2008.
33.
LiangX.VirvaloT., ‘An energy recovery system for a hydraulic crane.’Proc. IMechE, Part C: J. Mechanical Engineering Science215 (6) (2001): 737–744.
34.
BruunL., Mobile handling device Patent US6804957, USA 2004.
35.
AnderssonB. R., ‘A survey of load-sensing systems.’BFPR J.13 (1981): 103–115.
36.
RydbergK.-E., ‘Energy efficient hydraulic systems and regenerative capabilities.’ In Proceedings of the 9th Scandinavian International Conference on Fluid power, Linköping, Sweden 2005.
37.
NielsenB., Hydraulic valve arrangement Patent US2005072954, USA 2005.
38.
AnderssonB. R.MartinA. D. A., ‘Vickers new technologies applied to electrohydraulic controls.’ In Proceedings of the International Off-Highway and Powerplant Congress and Exposition, Indianapolis, Indiana 1996, vol. 2.
39.
BookR.GoeringC., ‘Programmable electrohydraulic valve.’ In Proceedings of the International Off-Highway and Powerplant Congress and Exposition, Indianapolis, USA 1999.
40.
YaoB., ‘Integrated mechatronic design of precision and energy saving electro-hydraulic systems.’ In Proceedings of the 7th International Conference on Fluid power transmission and control, Hangzhou, China 2009, pp. 360–372.
41.
BackéW., Systematik der hydraulischen Widerstandsschaltungen in Ven tilen und Regelkreisen (1974) ISBN 3-7830-0078-5 (Otto Krausskopf-Verlag GmbHMainz).
42.
MerrittH. E., Hydraulic control systems (John WileyChichester1967).
43.
PerssonT., On fluid power control, with special reference to over-center valves Lic Thesis, LiTH (The Institute of Technology at Linköping University), Sweden1989.
44.
AndersenT. O.HansenM. R.PedersenP.ConradF., ‘The influence of flow force characteristics on the performance of over centre valve systems.’ In Proceedings of the SICFP'05, Linköping, Sweden 2005.
45.
PedersenP.AndersenT. O.HansenM. R.ConradF., ‘Improved performance of over centre valve system utilizing negative flow force characteristics.’ In Proceedings of the 6th International Conference on Fluid power transmission and control, ICFP'2005, Hangzhou, China 2005.
46.
BurrowsC. R., ‘Fluid power systems – some research issues.’Proc. IMechE, Part C: J. Mechanical Engineering Science214 (1) (2000): 203–220 DOI:.
47.
EdgeK. A., ‘The control of fluid power systems – responding to the challenges.’Proc. IMechE, Part I: J. Systems and Control Engineering211 (2) (1997): 91–110.
48.
StotenD. P.BulutS., ‘Application of the MCS algorithm to the control of an electrohydraulic system.’ In Proceedings of the 20th International Conference on Industrial electronics, control and instrumentation, IECON '941994 vol. 3, pp. 1742–1747.
49.
YaoB., ‘High performance adaptive robust control of nonlinear systems: a general framework and new schemes.’ In Proceedings of the 36th IEEE Conference on Decision and control1997 vol. 3, pp. 2489–2494, ISBN 0-7803-3970-8.
50.
YaoB.BuF.ReedyJ.ChiuG. T.-C., ‘Adaptive robust motion control of single-rod hydraulic actuators: theory and experiments.’IEEE/ASME Trans. on Mechatronics5 (1) (2000): 79–91.
51.
YuanQ.SchottlerC.LewJ. Y., ‘Electronic flow control valve (EFCV) with pressure compensation capabillity.’ In Proceedings of the 5th International Fluid Power Conference, Aachen, Germany March 2006.
52.
LiuY.XuB.YangH.ZengD., ‘Modeling of separate meter in and separate meter out control system.’ In Proceedings of the IEEE/ASME International Conference on Advanced intelligent mechatronics, AIM 2009, Singapore July 2009, pp. 227–232.
53.
LinS.-C. J.AkersA., ‘Modeling and analysis of the dynamics of a flow control servovalve that uses a two-spool configuration.’ In Proceedings of the ASME Winter Annual Meeting 1990 vol. WA90/FPST-3 (American Society of Mechanical EngineersNew York).
54.
AndersonR. T.LiP. Y., ‘Mathematical modeling of a two spool flow control servovalve using a pressure control pilot.’J. Dynamic Systems, Measmt, Control124 (3) (2002): 420–427.
55.
XuB.LiuY.YangH.WangY., ‘Simulation study of the novel valve arrangement used in hydraulic control system.’ In Proceedings of 6.IFK, Dresden, Germany 2008, pp. 139–148.
56.
AnderssonB. R., On the Valvistor, a proportionally controlled seat valve PhD Thesis, LiTH (The Institute of Technology at Linköping University), Sweden1984, ISBN 91-7372-748-2.
57.
BackéW., ‘Design systematics and performance of cartridge valve controls.’ In Proceedings of the International Conference on Fluid power, SICFP'87 March 1987, vol. 1, pp. 1–48.
58.
ErikssonB.LarssonJ.PalmbergJ.-O., ‘A novel valve concept including the valvistor poppet valve.’ In Proceedings of the 10th Scandinavian International Conference on Fluid power (Eds VileniusJ.KoskinenK. T.), May 2007, vol. 3, pp. 355–364.
59.
FunkJ. E., ‘Poppet valve stability.’J. Basic Engng86 (1961): 207–212.
60.
McCloyD.McGuiganR. H., ‘Some static and dynamic characteristics of poppet valves.’Proc. Instn Mech. Engrs179 (1961): 199–213.
61.
ShinY. C., ‘Static and dynamic characteristics of a two stage pilot relief valve.’J. Dynamic Systems, Measmt, Control113 (2) (1991): 280–288.
62.
HayashiS., ‘Instability of poppet valve circuit.’JSME Int. J. Ser. C38 (3) (1995): 357–366.
63.
MullerM. T.FalesR., ‘Design and analysis of a two stage poppet valve for flow control.’Int. J. Fluid Power9 (1) (2008): 17–26.
64.
ErikssonB.AnderssonB. R.PalmbergJ.-O., ‘The dynamic performance of a pilot stage in a poppet type hydraulic flow amplifier.’ In Proceedings of the 51st NCFP Technical Conference, Las Vegas, USA March 2008, pp. 659–668.
65.
ErikssonB.RösthM.PalmbergJ.-O., ‘A high energy efficient mobile fluid power system - novel system layout and measurements.’ In Proceedings of 6.IFK, Dresden, Germany 2008.
66.
JanssonA.KrusP.PalmbergJ.-O., ‘Decoupling of response and pressure level in a hydraulic actuator.’ In Proceedings of the 4th Bath International Fluid Power Workshop 1991.
67.
JanssonA., Fluid power system design – a simulation approach PhD Thesis, LiTH (The Institute of Technology at Linköping University), Sweden1994.
68.
ElfvingM., On fluid power control, a concept for a distributed controller of fluid power actuators Lic Thesis, LiTH (The Institute of Technology at Linköping University), Sweden1997.
69.
ErikssonB.RösthM.PalmbergJ.-O., ‘Energy saving system utilizing LQ-technique design.’ In Proceedings of the 7th International Conference on Fluid power transmission and control, Hangzhou, China 2009, pp. 224–229.
70.
PlummerA. R.VaughanN. D., ‘Robust adaptive control for hydraulic servosystems.’J. Dynamic Systems, Measmt, Control118 (2) (1996): 237–244.
71.
MurrenhoffH., ‘Systematic approach to the control of hydrostatic drives.’Proc. IMechE, Part I: J. Systems and Control Engineering213 (5) (1999): 333–347.
72.
YuanQ.BengeaS.PiyabongkarnD.BrennerP., ‘Dynamic control of a distributed embedded eletro-hydraulic system.’ In Proceedings of the 2007 SAE World Congress April 2007 (SAE InternationalWarrendale, PA).
73.
LiuS.YaoB., ‘Coordinate control of energy saving programmable valves.’IEEE Trans. Control Systems Technol.16 (1) (2008): 34–45.
74.
TaborK. A., ‘Optimal velocity control and cavitation prevention of a hydraulic actuator using four valve independent metering.’ In Simulation and optimization: system level, component level, advanced technology/methodology2005vol. 1 (SAE InternationalWarrendale, PA).
75.
ShenoudaA.BookW., ‘Optimal mode switching for a hydraulic actuator controlled with four-valve independent metering configuration.’Int. J. Fluid Power9 (1) (2008): 35–43.
76.
‘Mobile hydraulic system has advanced control features.’Hydraulic and Air Engng (1975, February/March): pp. 51–53.
77.
‘System monti - die 3.lösung.’Fluid: 25–29 February 1975 (in German).
78.
‘Improved hydraulic control system.’Construction Plant & Equipment (1975, February): pp. 23–24.
79.
‘Epokgörande hydraulstyrsystem för lätt och enkel maskinell lyftning och grävning.’Transportnytt (1975): pp. 40–42 (in Swedish).
80.
‘Monti ein neues hydraulisches steuersystem.’Öl Hydraulik und pneumatik22 (4) (1978): 188–192.
81.
TurnerS. B.LakinD. F., ‘Electrohydraulic proportional control valve assemblies.’ European Patent EP0809737 1997.
82.
StephensonD. B.PfaffJ. L., ‘Hydraulic circuit with a return line metering valve and method of operation.’ Patent US6467264, USA 2002.
