A qualitative account of the causes and effects of performance degradation and failure in hydrogen-fuelled polymer electrolyte fuel cells (PEFCs) is given in the present review. The purpose of the review is to establish a backbone understanding of the phenomenological processes that occur within the PEFC, how they interact, how they are influenced through elements of design, manufacturing and operation, and ultimately how they result in performance degradation and cell failure. In the current work, 22 common faults are identified which are induced by 48 frequent causes. The major PEFC components considered here that are susceptible to faults are the polymer electrolyte-based membrane, the anode and cathode catalyst layers, gas diffusion and microporous layers, seals and the bipolar plate. Faults pertaining to these components can cause irreversible increases in activation, mass transportation, ohmic and fuel efficiency losses, or indeed cause catastrophic cell failure.
CooperJ. S.Design analysis of PEMFC bipolar plates considering stack manufacturing and environmental impact. J. Power Sources., 2004, 129, 152–169.
4.
YuP. T.GuW.MakhariaR.WagnerF. T.GasteigerA.The impact of carbon stability on PEM fuel cell startup and shutdown voltage degradation. Durability - fuel starvation and start/stop degradation. In the 210th ECS Meeting, Cancun, Mexico, 29 October-3 November 2006.
5.
FietelbergA. S.StathopoulosJ.QiZ.SmithC.ElterJ. F.Reliability of plug power GenSysTM fuel cell systems. J. Power Sources, 2005, 147, 203–207.
CommerP.HartingC.SeeligerD.SphorE.Modeling of proton transfer in polymer electrolyte membranes on different time and length scales. Mol. Simul., 2004, 30, 755–763.
12.
PeiH.HongL.LeeJ. Y.Polymer electrolyte membrane based on 2-acrylamido-2-methyl propane-sulfonic acid fabricated by embedded polymerization. J. Power Sources, 2006, 161, 949–956.
13.
XieJ.WoodD. L.IIIWayneD. M.ZawodzinskiT. A.AtanassovP.BorupR. L.Durability of PEFCs at high humidity conditions. J. Electrochem. Soc., 2005, 152(1), A104–A113.
14.
XieJ.WoodD. L.IIIMoreK. L.AtanassovP.BorupR. L.Mictrostructural changes of membrane electrode assemblies during PEFC durability testing at high humidity conditions. J. Electrochem. Soc., 2005, 152(5), A1011–A1020.
15.
LeeS.-Y.ChoE.LeeJ.-H.KimH.-J.LimT.-H.OhI.-H.WonJ.Effects of purging on the degradation of PEMFCs operating with repetitive on/off cycles. J. Electrochem. Soc., 2007, 154(2), B194–B200.
16.
ZhaiY.ZhangH.LiuG.HuJ.YiB.Degradation study on MEA in H3PO4/PBI high-temperature PEMFC life test. J. Electrochem. Soc., 2007, 154(1), B72–B76.
17.
DarlingR. M.MeyersJ. P.Mathematical model of platinum movement in PEM fuel cells. J. Electrochem. Soc., 2005, 152(1), A242–A247.
18.
AraganeJ.MurahashiT.OkadaT.Change of Pt distribution in the active components of phosphoric acid fuel cell. J. Electrochem. Soc., 1988, 135(4), 844–850.
19.
ChoE. A.KoJ.-J.HaH. Y.HongS.-A.LeeK.-Y.LimT.-W.OhI.-H.Characteristics of the PEMFC repetitively brought to temperatures below 0°. J. Electrochem. Soc., 2003, 150(12), A1667–A1670.
20.
St-PierreJ.WilkinsonD. P.KnightsS.BosM.Relationship between water management, contamination and lifetime degradation in PEFC. J. New Mater. Electrochem. Syst.2000, 3, 99–106.
21.
MohtadiR.LeeW.-K.Van ZeeJ. W.Assessing durability of cathodes exposed to common air impurities. J. Power Sources, 2004, 138, 216–225.
22.
MooreJ. M.AdcockP. L.LakemanJ. B.MepstedG. O.The effect of battlefield contaminants on PEMFC performance. J. Power Sources, 2000, 85, 254–260.
23.
JingF.HouM.ShiW.FuJ.YuH.MingP.YiB.The effect of ambient contamination of PEMFC performance. J. Power Sources, 2007, 166,172–176.
24.
SpringerT. E.RockwardT.ZawodzinskiT. A.GottesfeldS.Model for polymer electrolyte fuel cell operation on reformate feed. J. Electrochem. Soc., 2001, 148(1), A11–A23.
25.
SishtlaC.KoncarG.PlatonR.GamburzevS.ApplebyA. J.VelevO.Performance and endurance of a PEMFC operated with synthetic reformate fuel feed. J. Power Sources, 1998, 71, 249–255.
26.
QiZ.HeC.KaufmanA.Effect of CO in the anode fuel on the performance of PEM fuel cell cathode. J. Power Sources, 2002, 111, 239–274.
27.
RamaP.ChenR.ThringR.A polymer electrolyte fuel cell model with multi-species input. Proc. IMechE, Part A: J. Power and Energy, 2005, 219, 255–271.
28.
LiuP.LogadottirA.NorskovJ. K.Modeling the electro-oxidation of CO and H2/CO on Pt, Ru, PtRu and Pt3Sn. Electrochim. Acta, 2003, 48, 3731–3742.
29.
IsonoT.SuzukiS.KanekoM.AkiyamaY.MiyakeY.YonezuI.Development of a high-performance PEFC module operated by reformed gas. J. Power Sources, 2000, 86, 269–273.
30.
SiY.JiangR.LinJ.-C.KunzR.FentonJ. M.CO tolerance of carbon-supported platinum-ruthenium catalysts at elevated temperature and atmospheric pressure in a PEM fuel cell. J. Electrochem. Soc., 2004, 151(11), A1820–A1824.
31.
GottesfledS.PaffordJ.A new approach to the problem of carbon monoxide poisoning in fuel cells operating at low temperatures. J. Electrochem. Soc., 1988, 135(10), 2651–2652.
32.
AdcockP. A.PachecoS. V.NormanK. M.UribeF. A.Transition metal oxides as reconfigured fuel cell anode catalysts for improved CO tolerance: Polarization data. J. Electrochem. Soc., 2005, 152(2), A459–A466.
33.
ChengX.ShiZ.GlassN.ZhangL.ZhangJ.SongD.LiuZ.-S.WangH.ShenJ.A review of PEM hydrogen fuel cell contamination: Impacts, mechanisms, and mitigation. J. Power Sources, 2007, 165, 739–756.
34.
MarrC.LiX.Composition and performance modelling of catalyst layer in a proton exchange membrane fuel cell. J. Power Sources, 1999, 77, 17–27.
35.
WangQ.EikerlingM.SongD.LiuZ.NavessinT.XieZ.HoldcroftS.Functionally graded cathode catalyst layers for polymer electrolyte fuel cells. Part I: Theoretical modelling. J. Electrochem. Soc., 2004, 151(7), A950–A957.
36.
XieZ.NavessinT.ShiK.ChowR.WangQ.SongD.AndreausB.EikerlingM.LiuZ.HoldcroftS.Functionally graded cathode catalyst layers for polymer electrolyte fuel cells. Part II: Experimental study of the effect of nafion distribution. J. Electrochem. Soc., 2005, 152(6), A1171–A1179.
37.
FrostJ. C.GascoyneJ. M.HardsG. A.WilkinsonD. P.PraterK. B.Manufacture of electrodes. US Pat. 5 702 839, 1997.
38.
FullerT.GrayG.Carbon corrosion induced by partial hydrogen coverage. Durability and reliability of low-temperature fuel cells systems. In the 208th ECS Meeting, Los Angeles, CA, 16–21 October 2005, vol. 1(8).
39.
MeyersJ. P.DarlingR. M.Model of carbon corrosion in PEM fuel cells. J. Electrochem. Soc., 2006, 153(8), A1432–A1442.
40.
MerzouguiB.SwathirajanS.Rotating disk electrode investigations of fuel cell catalyst degradation due to potential cycling in acid electrolyte. J. Electrochem. Soc., 2006, 153(12), A2220–A2226.
41.
StevensD. A.HicksM. T.HaugenG. M.DahnJ. R.Ex situ and in situ stability studies of PEMFC catalysts. effect of carbon type and humidification on degradation of the cathode. J. Electrochem. Soc., 2005, 152(12), A2309–A2315.
42.
XuH.SongYKunzH. R.FentonJ. M.Effect of elevated temperature and reduced relative humidity on ORR kinetics for PEM fuel cells. J. Electrochem. Soc., 2005, 152(9), A1828–A1836.
43.
ShaoY.YonG.ShiP.Durability study of Pt/C and Pt/CNTs catalysts under simulated PEM fuel cell conditions. J. Electrochem. Soc., 2006, 153(6), A1093–A1097.
44.
SchulzeM.KnoriT.SchneiderA.GülzowE.Degradation of sealings for PEFC test cells during fuel cell operation. J. Power Sources, 2004, 127, 222–229.
45.
ZhangF. Y.YangX. G.WangC. Y.Liquid water removal from a polymer electrolyte fuel cell. J. Electrochem. Soc., 2006, 153(2), A225–A232.
46.
MaharudrayyaS.JayantiS.DeshpandeA. P.Pressure drop and flow distribution in multiple parallel-channel configurations used in proton-exchange membrane fuel cell stacks. J. Power Sources, 2006, 157, 358–367.
47.
MaharudrayyaS.JayantiS.DesphandeA. P.Pressure losses in laminar flow through serpentine channels in fuel cell stacks. J. Power Sources, 2004, 138, 1–13.
48.
BerrarasF.LozanoA.ValinoL.MarinC.PasauA.Flow distribution in a bipolar plate of a proton exchange membrane fuel cell: Experiments and numerical simulation studies. J. Power Sources, 2005, 144, 54–66.
49.
KarvonenS.HottinenT.SaarinenJ.HimanenO.Modeling of flow field in polymer electrolyte membrane fuel cell. J. Power Sources, 2006, 161, 876–887.
50.
ShimpaleeS.GreenwayS.Van ZeeJ. W.The impact of channel path length on PEMFC flow-field design. J. Power Sources, 2006, 160, 398–406.
51.
SuA.WengF.-B.HsuC.-Y.ChenY.-M.Studies on flooding in PEM fuel cell cathode channels. Int. J. Hydrog. Energy2006, 31, 1031–1039.
52.
TraboldT. A.OwejanJ. P.JacobsonD. L.ArifM.HuffmanP. R.In situ investigation of water transport in an operating PEM fuel cell using neutron radiography: part 1 - experimental method and serpentine flow field results. Int. J. Heat Mass Transf., 2006, 49, 4712–4720.
53.
TraboldT. A.OwejanJ. P.JacobsonD. L.ArifM.HuffmanP. R.In situ investigation of water transport in an operating PEM fuel cell using neutron radiography: part 2 - transient water accumulation in an inter-digitated cathode flow field. Int. J. Heat Mass Transf., 2006, 49, 4721–4731.
54.
LiuX.GuoH.YeF.MaC. H.Water flooding and pressure drop characteristics in flow channels of proton exchange membrane fuel cells. Electrochim. Acta2007, 52, 3607–3614.
55.
YiJ. S.NguyenT. V.Multicomponent transport in porous electrodes of proton exchange membrane fuel cells using the interdigitated gas distributors. J. Electrochem. Soc., 1999, 146(1), 38–45.
56.
YanW.-M.YangC.-H.SoongC.-Y.ChenF.MeiS.-C.Experimental studies on optimal operating conditions for different flow field designs of PEM fuel cells. J. Power Sources, 2006, 160, 284–292.
57.
GrujicicM.ZhaoC. L.ChittajalluK. M.Ocher-BeckJ. M.Cathode and interdigitated air distributor geometry optimization in polymer electrolyte membrane (PEM) fuel cells. Mater. Sci. Eng. B, 2004, 108, 241–252.
58.
WangL.LiuH.Performance studies of PEM fuel cells with interdigitated flow fields. J. Power Sources, 2004, 134, 185–196.
59.
ChengB.MinggaoO.BaolianY. I.Analysis of water management in proton exchange membrane fuel cells. Tsinghua Sci. Technol., 2006, 11(11), 54–64.
60.
HwangJ. J.ChaoC. H.HoW. Y.ChangC. L.WangD. Y.Effect of flow orientation on thermal-electrochemical transports in a PEM fuel cell. J. Power Sources, 2006, 157, 85–97.
61.
SuA.WengF.-B.HsuC.-Y.ChenY.-M.Studies on flooding in PEM fuel cell cathode channels. Int. J. Hydrog. Energy2006, 31, 1031–1039.
62.
AratiE.PinnaM.CostaP.Gas-phase mass-transfer resistance at PEMFC electrodes. Part 2. Effects of the flow geometry and the related pressure field. J. Power Sources, 2006, 158, 206–212.
63.
HsiehS.-S.YangS.-H.KuoJ.-K.HuangC.-F.TsaiH.-H.Study of operational parameters on the performance of micro PEMFCs with different flow fields. Energy Convers. Manage., 2006, 47, 1868–1878.
64.
Shyam PrasadK. B.MaharudrayyaS.JayantiS.Flow maldistribution in interdigitated channels used in PEM fuel cells. J. Power Sources, 2006, 159, 595–604.
65.
ZouJ.PengX.-F.YanW.-M.Dynamic analysis of gas transport in cathode side of PEM fuel cell with interdigitated flow field. J. Power Sources, 2006, 159, 514–523.
66.
YanW.-M.MeiS.-C.SoongC.-Y.LiuZ.-S.SongD.Experimental study on the performance of PEM fuel cells with interdigitated flow channels. J. Power Sources, 2006, 160, 116–122.
67.
YanW.-M.ChenC.-Y.MeiS.-C.SoongC.-Y.ChenF.Effects of operating conditions on cell performance of PEM fuel cells with conventional or interdigitated flow field. J. Power Sources, 2006, 162, 1157–1164.
68.
OwejanJ. P.TraboldT. A.JacobsonD. L.BakerD. R.HusseyD. S.ArifM.In situ investigation of water transport in an operating PEM fuel cell using neutron radiography: part 2 - transient water accumulation in an interdigitated cathode flow field. Int. J. Heat Mass Transf., 2006, 49, 4921–4931.
69.
HwangJ. J.ChaoC. H.WuW.Thermal-fluid transports in a five-layer membrane-electrode assembly of a PEM fuel cell. J. Power Sources, 2006, 163, 450–459.
70.
GeS.-H.YiB.-L.A mathematical model for PEMFC in different flow modes. J. Power Sources, 2003, 142, 1–11.
71.
HwangJ. J.ChaoC. H.HoW. Y.ChangC. L.WangD. Y.Effect of flow orientation on thermal-electrochemical transports in a PEM fuel cell. J. Power Sources, 2006, 157, 85–97.
72.
LouG. L.JuH.WangC.-Y.Prediction of dry-wet-dry transition in polymer electrolyte fuel cells. J. Electrochem. Soc., 2007, 154(3), B316–B321.
73.
WatanabeM.UchidaH.SekiY.EmoriM.Self-humidifying polymer electrolyte membranes for fuel cells. J. Electrochem. Soc., 1996, 143(12), 3847–3852.
74.
WatanabeM.UchidaH.EmoriM.Analysis of self-humidification and suppression of gas crossover in Pt-dispersed polymer electrolyte membranes for fuel cells. J. Electrochem. Soc., 1998, 145(4), 1137–1141.
75.
LiuY.-H.YiB.ShaoZ.-G.WangL.XingD.ZhangH.Pt/CNTs-Nafion reinforced and self-humidifying composite membrane for PEMFC applications. J. Power Sources, 2007, 163, 807–813.
76.
ZhangY.ZhangH.ZhuX.GangL.BiC.LiangY.Fabrication and characterisation of a PTFE-reinforced integral composite membrane for self-humidifying PEMFC. J. Power Sources, 2007, 165, 786–792.
77.
WatanabeM.Structure for wetting diaphragm of solid polymer electrolyte electrochemical cell and process of preparing same. US Pat. 5 529 855, 1996.
78.
WatanabeM.Fuel cell, electrolytic cell and process of cooling and/or rehumidifying same. US Pat. 5 846 668, 1998.
79.
VossH. H.WilkinsonD. P.WatkinsD. S.Method and apparatus for removing water from electrochemical fuel cells. US Pat. 5 260 143, 1993.
80.
VossH. H.WilkinsonD. P.WatkinsD. S.Method and apparatus for removing water from electrochemical fuel cells by controlling the temperature and pressure of the reactant streams. US Pat. 5 441 819, 1995.
81.
WilkinsonD. P.VossH. H.FletcherN. J.JohnsonM. C.PowE. G.Electrochemical fuel cell stack with concurrent flow of coolant and oxidant streams and countercurrent flow of fuel and oxidant streams. US Pat. 5 773 160, 1998.
82.
FletcherN. J.ChowC. Y.PowE. G.WozniczkaB. M.VossH. H.HornburgG.Electrochemical fuel cell stack with concurrently flowing coolant and oxidant streams. US Pat. 5 547 776, 1996.
83.
QiZ.KauffmanA.Improvement of water management by a microporous sublayer for PEM fuel cells. J. Power Sources, 2002, 109, 38–46.
84.
WeberA. Z.NewmanJ.Effects of microporous layers in polymer electrolyte fuel cells. J. Electrochem. Soc., 2005, 152(4), A677–A688.
85.
PasaogullariU.WangC.-Y.Two-phase transport and the role of micro-porous layer in polymer electrolyte fuel cells. Electrochim. Acta, 2004, 49, 4359–4369.
86.
PasaogullariU.WangC.-Y.ChenK. S.Two-phase transport in polymer electrolyte fuel cells with bilayer cathode gas diffusion media. J. Electrochem. Soc., 2005, 152(8), A1574–A1582.
87.
GostickJ. T.FowlerM. W.IoannidisM. A.ProtzkerM. D.VolfkovichY. M.SakarsA.Capillary pressure and hydrophilic porosity in gas diffusion layers for polymer electrolyte fuel cells. J. Power Sources, 2006, 156, 375–387.
88.
LinG.Van NguyenT.Effect of thickness and hydrophobic polymer content of the gas diffusion layer on electrode flooding level in a PEMFC. J. Electrochem. Soc., 2005, 152(1), A1942–A1948.
89.
WangX. L.ZhangH. M.ZhangJ. L.XuH. F.TianZ. Q.ChenJ.ZhongH. X.LiangY. M.YiB. L.Micro-porous layer with composition carbon black for PEM fuel cells. Electrochim. Acta, 2006, 51, 4909–4915.
90.
GurauV.BluemleM. J.De CastroE. S.TsouY.-M.ZawodzinskiT. A.Jr.MannA.Jr.Characterisation of transport properties in gas diffusion layers for proton exchange membrane fuel cells. Part II: Absolute permeability. J. Power Sources, 2006, 160, 1156–1162.
91.
BeversD.RogersR.von BradkeM.Examination of the influence of PTFE coating on the properties of carbon papers in polymer electrolyte fuel cells. J. Power Sources, 1996, 63, 193–201.
92.
LimC.WangC. Y.Effects of hydrophobic polymer content in GDL on power performance of a PEM fuel cell. Electrochim. Acta, 2004, 49, 4149–4156.
93.
ThobenB.SiebkeA.Influence of different gas diffusion layers on the water management of the PEFC cathode. J. New Mater. Electrochem. Syst., 2004, 7, 13–20.
94.
YanQ.ToghianiH.LeeY.-W.LiangK.CauseyH.Effect of sub-freezing temperatures on a PEM fuel cell performance, startup and fuel cell components. J. Power Sources, 2006, 160, 1242–1250.
95.
BernardiD. M.VerbruggeM. W.Mathematical model of a gas diffusion electrode bonded to a polymer electrolyte. Am. Inst. Chem. Eng., 1991, 37(8), 1151–1163.
96.
BernardiD. M.VerbruggeM. W.A Mathematical model of the solid-polymer-electrolyte fuel cell. J. Electrochem. Soc., 1992, 139(9), 2477–2491.
97.
FowlerM. W.MannR. F.AmphlettJ. C.PeppleyB. A.RobergeP. R.Incorporation of voltage degradation into a generalised steady state electrochemical model for a PEM fuel cell. J. Power Sources, 2002, 106, 274–283.
98.
YinK.-M.Parametric study of proton-exchange-membrane fuel cell cathode using an agglomerate model. J. Electrochem. Soc., 2005, 152(3), A583–A593.
99.
XieJ.GarzonF.ZawodzinskiT.SmithW.Ionomer degregation in composite MEAs and its effect on polymer electrolyte fuel cell performance. J. Electrochem. Soc., 2004, 151(7), A1084–A1093.
100.
RajalakshmiN.DhathathreyanK. S.Catalyst layer in PEMFC electrodes - fabrication, characterisation and analysis. Chem. Eng. J., 2007, 129, 31–40.
101.
MaoL.WangC.-Y.Analysis of cold start in polymer electrolyte fuel cells. J. Electrochem. Soc., 2007, 154(2), AB139–B146.
102.
LeeC.MeridaW.Gas diffusion layer durability under steady-state and freezing conditions. J. Power Sources, 2007, 164, 141–153.
103.
MaoL.WangC.-Y.Analysis of cold start in polymer electrolyte fuel cells. J. Electrochem. Soc., 2007, 154(2), B139–B146.
104.
ChoE. A.KoJ.-J.HaH.Y.HongS.-A.LeeK.-Y.LimT.-W.OhI.-H.Efeects of water removal on the performance degradation of PEMFCs repetitively brought to <0&dGC. J. Electrochem. Soc., 2004, 151(5), A661–A665.
105.
HouJ.YuH.ZhangS.SunS.WangH.YiB.MingP.Analysis of PEMFC freeze degradation at -20° after gas purging. J. Power Sources, 2006, 162, 513–520.
106.
ChangM.-H.ChenF.TengH.-S.Effects of two-phase transport in the cathode gas diffusion layer on the performance of a PEMFC. J. Power Sources, 2006, 160, 268–276.
107.
ZhanZ.XiaoJ.LiD.PanD.YuanR.Effects of porosity distribution variation on the liquid water flux through gas diffusion layers of PEM fuel cells. J. Power Sources, 2006, 160, 1041–1048.
108.
JangJ.-H.YanW.-M.ShihC.-C.Effects of the gas diffusion-layer parameters on cell performance of PEM fuel cells. J. Power Sources, 2006, 161, 323–332.
109.
EikerlingM.Water management in cathode catalyst layers of PEM fuel cells. J. Electrochem. Soc., 2006, 153(3), E58–E70.
110.
FeserJ. P.PrasadA. K.AdvaniS. G.Experimental characterisation of in-plane permeability of gas diffusion layers. J. Power Sources, 2006, 162, 1226–1231.
111.
GeJ.HigierA.LiuH.Effect of gas diffusion layer compression on PEM fuel cell performance. J. Power Sources, 2006, 159, 922–927.
112.
IhonenJ.MikkolaM.LindberghG.Flooding of gas diffusion backing in PEFCs. J. Electrochem. Soc., 2004, 151(8), A1152–A1161.
113.
NittaI.HottinenT.HilmanenO.MikkolaM.Inhomogeneous compression of PEMFC gas diffusion layer. Part I: Experimental. J. Power Sources, 2007, 171, 26–36.
114.
SuiP. C.DjilaliN.Analysis of coupled electron and mass transport in the gas diffusion layer of a PEM fuel cell. J. Power Sources, 2006, 161, 294–300.
115.
MatsuuraT.KatoM.HoriM.Study on metallic bipolar plate for proton exchange membrane fuel cell. J. Power Sources, 2006, 161, 74–78.
116.
ZhouP.WuC. W.MaG. J.Influence of clamping force on the performance of PEMFCs. J. Power Sources, 2007, 163, 874–881.
117.
ChangW. R.HwangJ. J.WengF. B.ChanS. H.Effect of clamping pressure on the performance of a PEM fuel cell. J. Power Sources, 2007, 166, 149–154.
118.
EscribanoS.BlachotJ.-F.EthièveJ.MorinA.MosdaleR.Characterisation of PEMFCs gas diffusion layers properties. J. Power Sources, 2006, 156, 8–13.
119.
BazylakA.SintonD.LiuZ.-S.DjilaliN.Effects of compression on liquid water transport and microstructure of PEMFC gas distribution layers. J. Power Sources, 2007, 163, 784–792.
120.
TawfikH.HungY.MahajanD.Metal bipolar plates for PEM fuel cell - a review. J. Power Sources, 2007, 163, 755–767.
121.
GreenwoodP.ChenR.ThringR. H.Polyethylene-carbon material for PEM fuel cell bi-polar plates. Proc. IMechE, Part L: J. Materials: Design and Applications, 2008, 222, DOI: 10.1243/14644207JMDA172.
122.
ScholtaJ.RohlandB.TrappV.FockenU.Investigations on novel low-cost graphite composite bipolar plates. J. Power Sources, 1999, 84, 231–234.
123.
DaviesD. P.AdcockP. L.TurpinM.RowenS. J.Stainless steel as a bipolar plate material for solid polymer fuel cells. J. Power Sources, 2000, 86, 237–242.
124.
WangH.SweikartA.TurnerJ. A.Stainless steel as bipolar plate material for polymer electrolyte membrane fuel cells. J. Power Sources, 2003, 115, 243–251.
125.
WangH.TurnerJ. A.Ferratic stainless steel as bipolar plate material for polymer electrolyte membrane fuel cells. J. Power Sources, 2004, 128, 193–200.
126.
LeeS.-J.HuangC.-H.LaiJ.-J.ChenY.-P.Corrosion-resistant component for PEM fuel cells. J. Power Sources, 2004, 131, 162–168.
127.
LeeS.-J.LaiJ.-J.HuangC.-H.Stainless steel bipolar plates. J. Power Sources, 2005, 145, 362–368.
ChoE. A.JeonU.-S.HongS.-A.OhI.-H.KangS.-G.Performance of a 1kW-class PEMFC stack using TiN-coated 316 stainless steel bipolar plates. J. Power Sources, 2005, 142, 177–183.
WangY.NorthwoodD. O.An investigation into polypyrrole-coated 316L stainless steel as a bipolar plate material for PEM fuel cells. J. Power Sources, 2006, 163, 500–508.
132.
GarciaM. A. L.SmitM. A.Study of electrodeposited polypyrrole coatings for the corrosion protection of stainless steel bipolar plates for the PEM fuel cell. J. Power Sources, 2006, 158, 397–402.
133.
SilvaR. F.FracnhiD.LeoneA.PilloniL.MasciA.PozioA.Surface conductivity and stability of metallic bipolar plate materials for polymer electrolyte fuel cells. Electrochem. Acta, 2006, 51, 3592–3598.
HeinzelA.MahlendorfF.NiemzigO.KreuzC.Injection moulded low cost bipolar plates for PEM fuel cells. J. Power Sources, 2004, 131, 35–40.
136.
KuanH.-C.MaC.-C. M.ChenK. H.ChenS.-M.Preparation, electrical, mechanical and thermal properties of composite bipolar plate for a fuel cell. J. Power Sources, 2004, 134, 7–17.
137.
KuoJ.-K.ChenC.-K.A novel Nylon-6-S316L fiber compound material for injection molded fuel cell bipolar plates. J. Power Sources, 2006, 162, 207–214.
KehrD.RinG.BanhardtV.Bipolar plate press device and method for production thereof. Schunk Kohlenstofftechnik GmbH.World Intellectual Property Organisation. Pat. WO03 047 016, 2003.
141.
Bipolar plate for fuel cell stacks. SGL Carbon AG. US Pat. 6 706 437, 2004.
142.
YenC.-Y.LiaoS.-H.LinY.eF.HungC.-H.LinY.-Y.MaC.-C. M.Preparation and properties of high performance nanocomposite bipolar plate for fuel cell. J. Power Sources, 2006, 162, 309–315.
143.
TricoliV.Proton and methanol transport in poly(perfluorosulfonate) membranes containing Cs+ and H+ cations. J. Electrochem. Soc., 1998, 145(11), 3798–3801.
144.
SamecZ.TrojanekA.LangmaierJ.Diffusion coefficients of alkali metal cations in nafion form ion-exchange measurements. J. Electrochem. Soc., 1997, 144(12), 4236–4242.
145.
LegrasM.HirataY.NguyenQ. T.LangevinD.MétayerM.Sorption and diffusion behaviours of water in Nafion 117 membranes with different counter ions. Desalination, 2002, 147, 351–357.
KoterS.PiotrowskiP.KerresJ.Comparative investigations of ion-exchange membranes. J. Membr. Sci., 1999, 153, 83–90.
148.
OkadaT.Møller-HolstS.GorsethO.KjelstrupS.Transport and equilibrium properties of Nafion membranes with H+ and Na+ ions. J. Electroanal. Chem., 1998, 442, 137–145.
149.
KunduS.SimonL. C.FowlerM.GrotS.Mechanical properties of Nafion electrolyte membranes under hydrated conditions. Polymer, 2005, 46, 11707–11715.
150.
XieG.OkadaT.Water transport behavior in Nafion 117 membranes. J. Electrochem. Soc., 1995, 142(9), 3057–3062.
151.
OkadaT.NakamuraN.YuasaM.SekineI.Ion and water transport characteristics in membranes for polymer electrolyte fuel cells containing H+ and Ca2+ cations. J. Electrochem. Soc., 1997, 144(8), 2744–2750.
152.
ShiM.AnsonF. C.Dehydration of protonated Nafion coatings induced by cation exchange and monitored by quartz crystal microgravimetry. J. Electroanal. Chem., 1997, 425, 117–123.
153.
KellyM. J.FalfilekG.BesenhardJ. O.KronbergerH.NauerG. E.Contaminant absorption and conductivity in polymer electrolyte membranes. J. Power Sources, 2005, 145, 249–252.
154.
SureshG.ScinidaY. M.PandeyA. K.GoswamiA.Self-diffusion coefficient of water in Nafion-117 membrane with different monovalent counterions: A radiotracer study. J. Membr. Sci., 2005, 250, 39–45.
155.
PourcellyG.OikonomouA.GavachC.HurwitzH. D.Influence of the water content on the kinetics of counter-ion transport in perflourosulphonic membranes. J. Electroanal. Chem., 1990, 287, 43–59.
156.
OkadaT.XieG.GorsethO.KjelstrupS.NakamuraN.ArimuraT.Ion and water transport characteristics of Nafion membranes as electrolytes. Electrochim. Acta, 1998, 43(24), 3741–3747.
157.
XieG.OkadaT.Characteristics of water transport in relation to microscopic structure in Nafion membranes. J. Chem. Soc. Faraday Trans., 1996, 94(4), 663–669.
XieG.OkadaT.Pumping effects in water movement accompanying cation transport across Nafion 117 membranes. Electrochem. Acta, 1996, 41(9), 1569–1571.
160.
OkadaT.Theory for water management in membranes for polymer electrolyte fuel cells. Part 1. The effect of impurity ions at the anode side on the membrane performances. J. Electroanal. Chem., 1999, 465, 1–17.
161.
OkadaT.Theory for water management in membranes for polymer electrolyte fuel cells. Part 2. The effect of impurity ions at the cathode side on the membrane performances. J. Electroanal. Chem., 1999, 465, 18–29.
162.
CasciolaM.AlbertuG.SganappaM.NarducciR.On the decay of Nafion proton conductivity at high temperature and relative humidity. J. Power Sources, 2006, 162, 141–145.
163.
WeberA. Z.NewmanJ.Transport in polymer-electrolyte membranes; part II. Mathematical model. J. Electrochem. Soc., 2004, 151(2), A311–A325.
164.
HommuraS.KunisaY.TeradaI.YoshitakeM.Characterisation of fibril reinforced membranes for fuel cells. J. Fluorine Chem., 2003, 120, 151–155.
AhnS.-Y.LeeY.-C.HaH. Y.HongS.-A.OhI.-H.Properties of the reinforced composite membranes formbed by melt soluble ion conducting polymer resins for PEMFCs. Electrochem. Acta, 2004, 50, 571–575.
167.
ZhangY.ZhangH.ZhuX.GangL.BiC.LiangY.Fabrication and characterisation of a PTFE-reinforced integral composite membrane for self-humidifying PEMFC. J. Power Sources, 2007, 165, 786–792.
168.
WangL.YiB. L.ZhangH. M.LiuY. H.XingD. M.ShaoZ.-G.CaiY. H.Sulfonated polyimide/PTFE reinforced membrane for PEMFCs. J. Power Sources, 2007, 167, 47–52.
169.
TangY.KarlssonA. M.SantareM. H.GilbertM.CleghornS.JohnsonW. B.An experimental investigation of humidity and temperature effects on the mechanical properties of perfluorsulfonic acid membranes. Mater. Sci. Eng. A, 2006, 425, 297–304.
170.
St-PierreJ.JiaN.Successful demonstration of ballard PEMFCS for space shuttle applications. J. New Mater. Electrochem. Syst.2002, 5, 263–271.
171.
RamaP.ChenR.ThringR. H.Polymer electrolyte fuel cell transport mechanisms: A universal modelling framework from fundamental theory. Proc. IMechE, Part A: J. Power and Energy, 2006, 220, 535–550.
172.
SeddiqM.KhaleghiH.MirzaeiM.Numerical analysis of gas cross-over through the membrane in a proton exchange membrane fuel cell. J. Power Sources, 2006, 161, 371–379.
173.
StanicV.BraunJ.HoberechtM.Durability of membrane electrode assemblies (MEAs) in PEM fuel cells operated on pure hydrogen and oxygen. Am. Inst. Aeronaut. Astronaut., 2003, 21(1), 468–475.
174.
HottinenT.HimanenO.KarbonenS.NittaI.Inhomogeneous compression of PEMFC gas diffusion layer. Part II: Modeling the effect. J. Power Sources, 2006, doi:10/1016/j.jopsour.2006.10.076.
175.
HuangX.SolasiR.ZouY.FeshlerM.ReifsniderK.ConditD.BurlatskyS.MaddenT.Mechanical endurance of polymer electrolyte membrane and PEM fuel cell durability. J. Polym. Sci. B Polym. Phys., 2006, 44, 2346–2357.
176.
KusogluA.KarlssonA. M.SantareM. H.CleghornS.JohnsonW. B.Mechanical behaviour of fuel cell membranes under humidity cycles and effect of swelling anisotropy on the fatigue stresses. J. Power Sources, 2007, 170, 345–358.
177.
ZhangJ.XieZ.ZhangJ.TangY.SongC.NavessinT.ShiZ.SongD.WangH.WilkinsonD. P.LiuZ.-S.HoldcroftS.High temperature PEM fuel cells. J. Power Sources, 2006, 160, 872–891.
178.
KusolguA.KarlssonA. M.SantareM. H.CleghornS.JohnsonW. B.Mechanical response of fuel cell membranes subjected to a hygro-thermal cycle. J. Power Sources, 2006, 161, 987–996.
179.
LiuD.CaseS.Durability of proton exchange membrane fuel cells under dynamic testing conditions with cyclic current profile. J. Power Sources, 2006, 162, 521–531.
180.
Sadiq Al-BaghdadiM. A. R.Shahad Al-JanabiH. A. K.Prediction of hygro-thermal stress distribution in proton exchange membranes using a three-dimensional multi-phase computation fluid dynamics model. Proc. IMechE, Part A: J. Power and Energy, 2007, 221, 941–953.
181.
CurtinD. E.LousenbergR. D.HenryT. J.TangemanP. C.TisackM. E.Advanced materials for improved PEMFC performance and life. J. Power Sources, 2004, 131, 41–18.
KinumotoT.InabaM.NakayamaY.OgataK.UmebayashiR.TaksakaA.IriyamaY.AbeT.OgumiZ.Durability of perfluorinated ionomer membrane against hydrogen peroxide. J. Power Sources, 2006, 158, 1222–1228.
187.
PiancaM.BarchiesiE.EspostoG.RadiceS.End groups in fluoropolymers. J. Fluorine Chem., 1999, 95, 71–84.
188.
AlentievA.KostinaJ.BondarenkoG.Chemical aging of Nafion: FTIR study. Desalination, 2006, 200, 32–33.
189.
QiaoJ.SaitoM.HayamizuK.OkadaT.Degradation of perfluorinated ionomer membranes for PEM fuel cells during processing with H2O2. J. Electrochem. Soc., 2006, 153(6), A967–A974.
190.
InabaM.KinumotoT.KiriakeM.UmebayashiR.TasksA.OgumiZ.Gas crossover and membrane degradation in polymer electrolyte fuel cells. Electrochim. Acta2006, 51, 5746–5753.
191.
LiuW.ZuckerbrodD.In situ detection of hydrogen peroxide in PEM fuel cells. J. Electrochem. Soc., 2005, 152(6), A1165–A1170.
192.
LaContiA. B.HamdanM.McDonaldR. C. In Handbook of fuel cells: fundamentals, technology and applications (Eds VielstichW.LammA.GaseigerH. A.), vol. 3, 2003 (Wiley, New York).
193.
InabaM.Degradation mechanisms for polymer electrolyte fuel cells. In the 14th International Conference on the Properties of Water and Steam, Kyoto, 2004.
194.
EndohE.TerazonoS.WidjajaH.TakimotoY.Degradation study of MEA for PEMFCs under low humidity conditions. Electrochem. Solid-State Lett., 2004, 7(7), A209–A211.
195.
SchmidtT.J.PaulusU.A.GasteigerH. A.BehmR. J.The oxygen reduction reaction on a Pt/carbon fuel cell catalyst in the presence of chloring anions. J. Electroanal. Chem., 2001, 508, 41–47.
196.
HealyJ.HaydenC.XieT.OlsonK.WaldoR.BrundageM.GasteigerH.AbbottJ.Aspects of the chemical degradation of PFSA ionomers used in PEM fuel cells. Fuel Cells, 2005, 5(2), 302–308.
197.
AokiM.UchidaH.WatanabeM.Novel evaluation method for degradation rate of polymer electrolytes in fuel cells. Electrochem. Commun., 2005, 7, 1434–1438.
198.
MittalV.KunzH. R.FentonJ. M.Effect of catalyst properties on membrane degradation rate and the underlying degradation mechanism in PEMFCs. J. Electrochem. Soc., 2006, 153(9), A1755–A1759.
