A methodology allowing for a modular setup of complex acoustic systems is developed. The transfer behaviour of the individual subsystems is formulated in time domain. Subsystem descriptions can be obtained by analytical considerations, numerical methods, or experimental data. Once the complex subsystems have been characterized experimentally, changes in system geometry can be implemented easily by exchanging or adding subsystems. To validate the modelling approach, experiments are conducted in an acoustic test rig with a combustor-type geometry. Results are compared to predictions from the model, demonstrating accuracy in frequency and time domain. Application to thermoacoustic instabilities arising in lean-premixed combustion is given. The influence of a modified fuel distribution on an unstable operating point of a lean-premixed combustor is studied and validated with experimental data. Additionally, a study on the parameters governing the flame transfer function is performed to generate a stability map of a model combustor. An advantage of the state-space approach is that stability of a thermoacoustic system can be determined by simply solving a matrix eigenvalue problem. This is in strong contrast to the traditional approach, where the complete model is formulated in frequency domain with infinite-dimensional transfer functions. The time domain approach is based on the methodology presented by Schuermans et al. [1]. In contrast to their work, however, subsystems are not obtained from modal expansions but are characterized by using system identification techniques. Additionally, accuracy of the time domain model is verified by experiments.
SchuermansB.BellucciV.PaschereitC. O.Thermoacoustic modeling and control of multi burner combustion systems. In Proceedings of the ASME Turbo Expo, Atlanta, USA, 2003, paper 2003-GT-38688.
2.
LieuwenT. C.YangV. (Eds) Combustion instabilities in gas turbine engines. In Progress in astronautics and aeronautics, vol. 210, 2005 (AIAA, Inc., Reston).
3.
DowlingA. P.HubbardS.Instability in lean premixed combustors. Proc. Instn Mech. Engrs, Part A: J. Power and Energy, 2000, 214, 317–332.
4.
DowlingA. P.MorgansA. S.Feedback control of combustion oscillations. Annu. Rev. Fluid Mech., 2005, 37, 151–182.
5.
SeumeJ. R.VortmeyerN.KrauseW.HermannJ.HantschkC.-C.ZanglP.GleisS.VortmeyerD.OrthmannA.Application of active combustion instability control to a heavy duty gas turbine. Trans. ASME, J. Eng. Gas Turbines Power, 1998, 19(6), 549–566.
6.
SewellJ.SobieskiP.BeersC.Application of continuous combustion dynamics monitoring on large industrial gas turbines. In Proceedings of the ASME Turbo Expo, Vienna, Austria, 2004, paper GT2004-54310.
7.
ReaS.JamesS.GoyC.ColechinM. J. F.On-line combustion monitoring on dry low NOx industrial gas turbines. Meas. Sci. Technol., 2003, 14, 1123–1130.
8.
RouxS.LartigueG.PoinsotT.MeierU.BératC.Studies of mean and unsteady flow in a swirled combustor using experiments, acoustic analysis, and large eddy simulations. Combust. Flame2005, 141, 40–54.
9.
SchuermansB.LuebckeH.BajuszD.FlohrP.Thermoacoustic analysis of gas turbine combustion systems using unsteady CFD. In Proceedings of the ASME Turbo Expo, Reno-Tahoe, USA, 2005, paper GT2005-68393.
10.
PolifkeW.Combustion instabilities. In Advances in aeroacoustics and applications, lecture series, VKI LS 2004-05, 2004 (Von Karman Institute, Brussels, Belgium).
11.
SattelmayerT.PolifkeW.Assessment of methods for the computation of the linear stability of combustors. Combust. Sci. Technol., 2003, 175, 453–476.
12.
SattelmayerT.PolifkeW.A novel method for the computation of the linear stability of combustors. Combust. Sci. Technol., 2003, 175, 477–497.
13.
EvesqueS.PolifkeW.Low-order modelling for annular combustors: validation and inclusion of modal coupling. In Proceedings of the ASME Turbo Expo, Amsterdam, The Netherlands, 2002, paper GT-2002-30064.
14.
StowS. R.DowlingA. P.Thermoacoustic oscillations in an annular combustor. In Proceedings of the ASME Turbo Expo, New Orleans, USA, 2001, paper 2001-GT-0037.
15.
SchuermansB. B. H.PaschereitC. O.PolifkeW.van der LindenJ. H.Prediction of acoustic pressure spectra in combustion systems using swirl stabilized gas turbine burners. In Proceedings of the IGTI Turbo Expo, Munich, Germany, 2000, paper 2000-GT-0105.
16.
PaschereitC. O.MoeckJ. P.BothienM. R.State-space modelling of thermoacoustic systems for stability analysis and time domain simulation. In Proceedings of the 13th International Congress on Sound and Vibration, Vienna, Austria, 2006.
17.
DupèreI. D. J.DowlingA. P.The use of Helmholtz resonators in a practical combustor. Trans. ASME, J. Eng. Gas Turbines Power, 2005, 127, 268–275.
18.
PaschereitC. O.GutmarkE.The effectiveness of passive combustion control methods. In Proceedings of the ASME Turbo Expo, Vienna, Austria, 2004, paper GT-2004-53587.
19.
McManusK. R.PoinsotT.CandelS. M.A review of active control of combustion instabilities. Prog. Energy Combust. Sci., 1993, 19, 1–29.
20.
MunjalM. L.Acoustics of ducts and mufflers, 1976 (Wiley & Sons, Inc., New York).
21.
PeatK. S.Evaluation of four-pole parameters for ducts with flow by the finite element method. J. Sound Vib., 1982, 84(3), 389–395.
22.
ZhouK.DoyleJ.Essentials of robust control, 1997 (Prentice Hall, Upper Saddle River, NJ).
23.
SchuermansB. B. H.PolifkeW.PaschereitC. O.Modeling transfer matrices of premixed flames and comparison with experimental results. In Proceedings of the ASME Turbo Expo, Indianapolis, USA, 1999, paper 1999-GT-0132.
24.
PaschereitC. O.SchuermansB.PolifkeW.MattsonO.Measurement of transfer matrices and source terms of premixed flames. Trans. ASME, J. Eng. Gas Turbines Power, 2002, 124, 239–247.
25.
ÅbomM.A note on the experimental determination of acoustical two-port matrices. J. Sound Vib., 1992, 155(1), 185–188.
26.
GustavsenB.SemlyenA.Rational approximation of frequency domain responses by vector fitting. IEEE Trans. Power Deliv., 1999, 14(3), 1052–1061.
27.
KollárI.PintelonR.SchoukensJ.Frequency domain system identification toolbox for matlab: improvements and new possibilities. In Proceedings of the XI. IFAC/IFORS International Symposium on System Identification and Parameter Estimation, Fukuoka, Japan, 1997, pp. 991–994.
28.
AntoulasA. C.SorensenD. C.Approximation of large-scale dynamical systems: An overview. Int. J. Appl. Math. Comput. Sci., 2001, 11(5), 1093–1121.
29.
SchuermansB.BellucciV.GuetheF.MeiliF.FlohrP.PaschereitC. O.A detailed analysis of thermoacoustic interaction mechanisms in a turbulent premixed flame. In Proceedings of the ASME Turbo Expo, Vienna, Austria, 2004, paper GT 2004-53831.
30.
LevineH.SchwingerJ.On the radiation of sound from an unflanged circular pipe. Phys. Rev., 1948, 73(4), 383–406.
31.
PolifkeW.KopitzJ.SerbanovicA.Impact of the fuel time lag distribution in elliptical premix nozzles on combustion stability. In Proceedings of the 7th AIAA/CEAS Aeroacoustics Conference, Maastricht, The Netherlands, 2001, paper 2001-2104.
32.
HaberL. C.VandsburgerU.SaundersW. R.KhannaV. K.An examination of the relationship between chemiluminescent light emission and heat release rate under non-adiabatic conditions. In Proceedings of the ASME Turbo Expo, Munich, Germany, 2000, paper 2000-GT-0121.
33.
AlbrechtP.BauermeisterF.BothienM. R.LacarelleA.MoeckJ. P.PaschereitC. O.GutmarkE.Characterization and control of lean blowout using periodically generated flame balls. In Proceedings of the ASME Turbo Expo, Barcelona, Spain, 2006, paper GT2006-90340.
34.
MoeckJ. P.BothienM. R.GuyotD.PaschereitC. O.Phase-shift control of combustion instability using (combined) secondary fuel injection and acoustic forcing. In Proceedings of the 1st Active Flow Control Conference, Berlin, Germany, 2006.
35.
LacarelleA.MoeckJ.KonleH.NayeriC. N.PaschereitC. O.Effect of the fuel/air mixing on NOx emissions and stability in a gas premixed combustion system. In Proceedings of the 45th AIAA Aerospace Science Meeting, Reno-Tahoe, USA, 2007, paper 2007-1417.
36.
BanaszukA.JacobsonC. A.KhibnikA. I.MehtaP. G.Linear and nonlinear analysis of controlled combustion processes. Part I: linear analysis. In Proceedings of the IEEE International Conference on Control Applications, Hawaii, USA, 1999, pp. 199–205.
