Computational study of the effect of sweep on the performance and flow field in an axial flow compressor rotor

Abstract

In the recent past, experimental studies have shown some advantages of blade lean and sweep in axial compressors. As most of the experimental results are combined with other features, it is difficult to determine the effect of individual parameters on the performance of the compressor. The present numerical studies are aimed at understanding the performance and three-dimensional flow pattern within and at the exit of swept and unswept rotors. Three rotors, namely, unswept, 20° forward swept, and 20° backward swept rotors, are analysed with a specific intention of understanding the three-dimensional flow pattern within the rotors and also the pattern of the blade boundary layer flow. The analysis was done using a fully three-dimensional viscous CFD code CFX-5. Results indicated a reduction in pressure rise with sweep. Backward sweep adversely affects the stall margin. Forward sweep changes the streamline pattern in such a way that the suction surface streamlines are deflected towards the hub and the pressure surface streamlines are deflected towards the casing. An opposite behaviour is observed in the backward swept rotors. High axial velocities reduce the secondary losses near the hub, resulting in a high pressure rise in forward swept rotor.

Keywords

sweep pressure rise streamline shift stall margin blade loading

Get full access to this article

View all access options for this article.

References

Mohammed

K. P.

Raj

D. P.

Investigations on axial flow fan impeller with forward swept blades. ASME J. Fluids Eng., 1977, 99, 543–547.

Yamaguchi

Tominaga

Masutani

Performance improvement by forward-skewed blading of axial fan moving blades. ISABE 93–7055, 1993, pp. 580–589.

Neubert

R. J.

Hobbs

D. E.

Weingold

H. D.

Application of sweep to improve the efficiency of a transonic fan part I: Design. AIAA J. Propul. Power, 1995, 11 (1), 49–54.

Wadia

A. R.

Szucs

P. N.

Crall

D. W.

Inner workings of aerodynamic sweep. ASME J. Turbomach., 1998, 120, 671–682.

Boyer

K. M.

King

P. I.

Copenhaver

W. W.

Stall inception in single-stage transonic compressors with straight and swept leading edges. AIAA J. Propul. Power, 1995, 11 (6), 1363–1366.

Beiler

M. G.

Carolus

T. H.

Computation and measurement of flow in axial flow fans with skewed blades. ASME J. Turbomach., 1999, 121, 59–66.

Gallimore

S. J.

Bolger

J. J.

Cumpsty

N. A.

Taylor

M. J.

Wright

P. I.

Place

J. M. M.

The use of sweep and dihedral in multistage axial flow compressor blading - part-I: University research and methods development. ASME J. Turbomach., 2002, 124, 521–532.

Gallimore

S. J.

Bolger

J. J.

Cumpsty

N. A.

Taylor

M. J.

Wright

P. I.

Place

J. M. M.

The use of sweep and dihedral in multistage axial flow compressor blading - part-II: Low and high speed test designs and test verification. ASME J. Turbomach., 2002, 124, 533–541.

Passrucker

Engber

Kablitz

Hennecke

D. K.

Effect of forward sweep in a transonic compressor rotor. Proc. Instn Mech. Engrs, Part A: J. Power and Energy, 2003, 217 (4), 357–365.

10.

Corsini

Rispoli

Using sweep to extend the stall free operating range in axial fan rotors. Proc. Instn Mech. Engrs, Part A: J. Power and Energy, 2004, 218 (2),129–139.

11.

Chen

W. J.

Computational analysis on a compressor blade. International Conference on Jets, Wakes and Separated Flows, ICJWSF-2005, Japan, 5–8 October 2005, pp. 1–8.

12.

Amano

R. S.

Blade sweep effects of turbomachinery. AIAA Aerospace Sciences Meeting and Exhibit, Navada, 10–13 January 2005, AIAA paper 2005–48, pp. 1–8.

13.

Bergner

Kablitz

Hennecke

D. K.

Passrucker

Steinhardt

Influence of sweep on the 3-D shock structure in an axial transonic compressor. In Proceedings of GT2005, ASME Turbo Expo 2005: Power for Land, Sea and Air, Nevada, USA, 6–9 June 2005, paper GT2005-68835, pp. 1–20.

14.

Launder

B. E.

Second-moment closure and its use in modeling turbulent industrial flows. Int. J. Numer. Methods Fluids, 1989, 9, 963–985.

15.

Kumar

Krishna O. G.

Govardhan

Sitaram

Effect of forward sweep on the performance and stall margin of a low speed axial compressor. In Proceedings of Tenth Asian Congress of Fluid Mechanics, Sri Lanka, 17–21 May 2004, pp. 1–6.