The present study has tested most of the loss models previously published in the open literature and found an optimum set of empirical loss models for a reliable performance prediction of centrifugal compressors. In order to improve the prediction of efficiency curves, this paper recommends a modified parasitic loss model. The performance analyses by using various empirical loss models are also compared with those by the two-zone modelling. Predicted performance curves by the proposed optimum set agree fairly well with experimental data for a variety of centrifugal compressors. The prediction method developed through this study can serve as a tool for preliminary design and assist the understanding of the operational characteristics of general purpose centrifugal compressors.
DixonS. L.Fluid Mechanics, Thermodynamics of Turbomachinery, 1978 (Pergamon Press, Oxford).
2.
WhitfieldA.BainesN. C.Design of Radial Turbomachines, 1990 (Longman Scientific and Technical).
3.
YahyaS. M.Turbines, Compressors and Fans, 1983 (Tata McGraw-Hill).
4.
LakshminarayanaB.Fluid Dynamics and Heat Transfer of Turbomachinery, 1995 (John Wiley, New York).
5.
AungierR. H.Mean streamline aerodynamic performance analysis of centrifugal compressorsTrans. ASME, J. Turbomachinery, 1995, 117, 360–366.
6.
ThanapandiP.PrasadR.Performance prediction and loss analysis of low specific speed submersible pumpsProc. Instn Mech. Engrs, Part A, 1990, 204(A4), 243–252.
7.
TakagiT.KobayashiJ.MiyashiroH.MorimotoH.Performance prediction of single-suction centrifugal pumps of different specific speeds. In ASME Twenty-fifth Annual International Gas Turbine Conference and Twenty-second Annual Fluids Engineering Conference on Performance Prediction of Centrifugal Pumps and Compressors, New Orleans, Louisiana, March 1980, pp. 227–234.
8.
DentonJ. D.Loss mechanisms in turbomachinesTrans. ASME, J. Turbomachinery, 1993, 115, 621–656.
9.
GalvasM. R.Fortran program for predicting off-design performance of centrifugal compressors. NASA TN D-7487, 1973.
10.
ConradO.RaifK.WesselsM.The calculation of performance maps for centrifugal compressors with vane-island diffusers. In ASME Twenty-fifth Annual International Gas Turbine Conference and Twenty-second Annual Fluids Engineering Conference on Performance Prediction of Centrifugal Pumps and Compressors, New Orleans, Louisiana, March 1980, pp. 135–147.
11.
CoppageJ. E.DallenbachF.EichenbergerH. P.HlavakaG. E.KnoernschildE. M.Van LeeN.Study of supersonic radial compressors for refrigeration and pressurization systems. WADC report 55-257, 1956.
12.
JansenW.A method for calculating the flow in a centrifugal impeller when entropy gradients are present. Royal Society Conference on Internal Aerodynamics (Turbomachinery), 1967 (IME).
13.
KrylovP.SpundeA.About the influence of the clearance between the working blades and housing of a radial turbine on its exponent. Izvestiya Vysshikh Uchebnykh Zavedeniy, Energetika (News of Institutions of Higher Learning), 1965, 7, 66.
14.
JohnstonJ. P.DeanR. C.Jr.Losses in vaneless diffusers of centrifugal compressors and pumps. Analysis, experiment, and designTrans. ASME, J. Engng for Power, 1966, 88, 49–62.
15.
StanitzJ. D.One-dimensional compressible flow in vaneless diffusers of radial- and mixed-flow centrifugal compressors, including effects of friction, heat transfer and area change. NACA TN 2610, 1952.
16.
DailyJ. W.NeceR. E.Chamber dimension effects on induced flow and frictional resistance of enclosed rotating disksTrans. ASME, J. Basic Engng, 1960, 82, 217–232.
17.
WiesnerF. J.A review of slip factors for centrifugal impellersTrans. ASME, J. Engng for Power, 1967, 89, 558–572.
18.
EckardtD.Flow field analysis of radial and backswept centrifugal compressor impellers. Part I: Flow measurements using a laser velocimeter. In ASME Twenty-fifth Annual International Gas Turbine Conference and Twenty-second Annual Fluids Engineering Conference on Performance Prediction of Centrifugal Pumps and Compressors, New Orleans, Louisiana, March 1980, pp. 77–86.
19.
JapikseD.A critical evaluation of three centrifugal compressors with pedigree data sets: Part 5—studies in component performanceTrans. ASME, J. Turbomachinery, 1987, 109, 1–9.
20.
JapikseD.Centrifugal Compressor Design and Performance, 1996 (Concepts ETI).
21.
LiebleinS.Loss and stall analysis of compressor cascadesTrans. ASME, J. Basic Engng, 1959, 81, 387–400.
22.
DeanR. C.Jr.SenooY.Rotating wakes in vaneless diffusersTrans. ASME, J. Basic Engng, 1960, 82, 563–574.
23.
WhitfieldA.Slip factor of a centrifugal compressor and its variation with flow rateProc. Instn Mech. Engrs, Combustion Engines Group, 1975, 189, 557–565.
