Performance of the resurfaced hip. Part 1: The influence of the prosthesis size and positioning on the remodelling and fracture of the femoral neck

Abstract

Abstract

Hip resurfacing is an established treatment for osteoarthritis in young active patients. Failure modes include femoral neck fracture and prosthesis loosening, which may be associated with medium-term bone adaptation, including femoral neck narrowing and densification around the prosthesis stem. Finite element modelling was used to indicate the effects of prosthesis sizing and positioning on the bone remodelling and fracture strength under a range of normal and traumatic loads, with the aim of understanding these failure modes better. The simulations predicted increased superior femoral neck stress shielding in young patients with small prostheses, which required shortening of the femoral neck to give an acceptable implant—bone interface. However, with a larger prosthesis, natural femoral head centre recreation in the implanted state was possible; therefore stress shielding was restricted to the prosthesis interior, and its extent was less sensitive to prosthesis orientation. With valgus orientation, the implanted neck strength was, at worst, within 3 per cent of its intact strength. The study suggests that femoral neck narrowing may be linked to a reduction in the horizontal femoral offset, occurring if the prosthesis is excessively undersized. As such, hip resurfacing should aim to reproduce the natural femoral head centre, and, for valgus prosthesis orientation, to avoid femoral neck fracture.