Abstract
Abstract
This paper develops a mechatronic grasper that can be used to investigate a preliminary experiment of a simple model-independent approach to control soft-tissue grasping based on, first, measurement of the total tangential grasp force and, second, discrimination of relaxation and frictional forces by imposing a limited basis set of grasper motions. The main motivation for this work is that tissue grasping is an important component of surgical procedures. However, there is a major criterion which should be achieved: maintaining grasp stability while avoiding damage due to excessive grip force. Thus, the automation of grasping force control requires a controller to apply grasping forces just sufficient to maintain grasp stability. This task is complicated by the serially connected dynamics of grasp friction and tissue relaxation.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
