In this study, a polymeric aortic heart valve made of poly(vinyl alcohol) (PVA)—bacterial cellulose (BC) nanocomposite is simulated and designed using a hyperelastic non-linear anisotropic material model. A novel nanocomposite biomaterial combination of 15 wt % PVA and 0.5 wt % BC is developed in this study. The mechanical properties of the synthesized PVA—BC are similar to those of the porcine heart valve in both the principal directions. To design the geometry of the leaflets an advance surfacing technique is employed. A Galerkin-based non-linear finite element method is applied to analyse the mechanical behaviour of the leaflet in the closing and opening phases under physiological conditions. The model used in this study can be implemented in mechanical models for any soft tissues such as articular cartilage, tendon, and ligament.
NistalF.Garcia-MartinezV.ArbeE.FernandezD.ArtinanoE.MazorraF.GalloI.‘In vivo experimental assessment of polytetrafluoroethylene trileaflet heart valve prosthesis.’J. Thoracic Cardiovascular Surg.99 (1990): 1047–1081
3.
KnierbinB.RosariusN.UngerA.ReulH.RauG.‘CAD design, stress analysis and in vitro evaluation of three leaflet blood-pump valves.’J. Biomed. Engng14 (1992): 275–286
4.
WijsmullerE. G.YuL. S.YuanB.BishopN. D.KolffW. J.‘Development of a new inflow valve for a 20 cc semisoft ventricle: Preliminary results.’Int. J. Artif. Organs13 (1990): 503–508
5.
MohammadiH.KlassenR. J.WanW. K.‘A finite element model on effects of impact load and cavitation on fatigue crack propagation in mechanical bileaflet aortic heart valve.’Proc. IMechE, Part H: J. Engineering in Medicine222 (7) (2008): 1115–1125 DOI: 10.1243/09544119JEIM432.
6.
GouldP. L.CatalogluA.DhattG.ChattopadhyayA.ClarkR.‘Stress analysis of the human aortic valve, computers and structures.’Comput. Structs3 (1973): 377–384
7.
KrucinskiS.VeselyI.DokanishM. A.‘Numerical simulation of leaflet flexure in bioprosthetic valve mounted on rigid and expansible sterns.’J. Biomech.26 (1993): 929–943
8.
PattersonE. A.HowardI. C.ThorntonM. A.‘A comparative study of linear and nonlinear simulations of the leaflets in a bioprosthetic heart valve during the cardiac cycle.’J. Med. Engng Technol.20 (1996): 95–108
9.
GrandeK. J.CochranR. P.ReinhallP. G.‘Finite element analysis of aortic heart valve sparing: Influence of graft shape and stiffness.’IEEE Trans. Biomed. Engng48 (2001): 647–654
10.
BeckA.ThubrikarM. J.RobicsekF.‘Stress analysis of the aortic valve with and without sinuses of valvular.’J. Heart Valve Dis.10 (2001): 1–11
11.
MohammadiH.AhmadianM. T.WanW. K.‘Time-dependent analysis of leaflets in mechanical aortic bileaflet valve in closing phase using the finite strip method.’J. Med. Engng Phys.28 (2006): 122–133
12.
RousseauE. P. M.SaurenA. A. H. J.HoutM. C. V.‘Elastic and viscoplastic material behaviour of fresh and glutaraldehyde-treated porcine aortic valve tissue.’J. Biomech.16 (1983): 339–348
13.
SripathiV. C.KumarR. K.BalakrishnamK. R.‘Further insights into normal aortic heart valve functions; rule of compliant aortic root on leaflet opening and valve orifice area.’Ann. Thoracic Surg.77 (2004): 844–851
14.
BurriesciG.HawardI. C.PattersonE. A.‘The stress/strain and fatigue behaviour of glutaraldehyde preserved heart valve tissue.’J. Biomech.10 (1999): 707–724
15.
LiJ.LouX. Y.KuangZ. B.‘A nonlinear anisotropic model for porcine heart valves.’J. Biomech.34 (2001): 1279–1289
16.
LuoX. Y.LiW. G.LiJ.‘Geometrical stress reduction factors in anisotropic porcine heart valves.’Trans. ASME, J. Biomech. Engng125 (2003): 735–744
17.
De HartJ.PetersG. W. M.SchreursP. G. J.BaaijensF. P. T.‘Collagen fibers reduce stresses and stabilize motion of aortic valve leaflets during systole.’J. Biomech.37 (2004): 303–311
MillonL. E.WanW. K.‘The polyvinyl alcohol — bacterial cellulose as a new nanocomposite for biomedical applications.’J. Biomed. Mater. Res. B; Appl. Biomater.79 (2006): 245–253
21.
GuhadosG.WanW. K.HutterJ.‘Measurement of the elastic modulus of single bacterial cellulose fibers using atomic force microscopy.’Langmuir21 (2005): 6642–6646
22.
JiangH.CampbellG.BoughnerD.WanW. K.QuantzM.‘Design and manufacturing of polyvinyl alcohol cryogel tri-leaflet heart valve prosthesis.’J. Med. Engng Phys.24 (2003): 267–277
MercerJ. I.BenedictyM.BahnsonH. T.‘The geometry and construction of the aortic leaflet.’J. Thoracic Cardiovascular Surg.65 (1973): 511–518
25.
GeraldF.Curves and surfaces for computer aided geometric design: a practical guide (Academic Press1993)
26.
YoganathanA. P.EberhardtC.WalkerP. G.‘Hydrodynamic performance of the Medtronic Freestyle aortic root bioprosthesis.’J. Heart Valve Dis. (1994), 3571–580
27.
KeiserR.MüllerM.HeidelbergerB.TeschnerM.GrossM.‘Contact handling for deformable point-based objects.’ In Proceedings of Vision, Modelling, Visualization (VMV'04), Stanford, USA, 2004, pp. 315–322.
28.
HeZ.XiB.ZhuK.HwangN. H. C.‘Mechanisms of mechanical heart valve cavitation: Investigation using a tilting disk valve model.’J. Heart Valve Dis.10 (2001): 666–674
29.
‘The Heart Valve Lab, The University of Western Ontario, What does a real heart look like?’ Dissecting a porcine (pig) heart (continued)1997, available from http://heartlab.robarts.ca/dissect/dissection2.html.
