Two biomedical grade polyurethanes, currently under investigation as an alternative tibial bearing for a total knee replacement, are analysed. Extensive mechanical testing has been performed on these materials to determine the mechanical properties in terms of strain energy density functions for use in the finite element package MSC.Marc 2001 that do not rely on linear elasticity. A variation in Poisson's ratio in the fourth decimal place can lead to significant errors in the magnitude and distribution of stresses in a linear elastic analysis. As large variations in this parameter (up to the first decimal place) were determined experimentally, it is concluded that a linear elastic approach to the stress analysis of these materials is not valid.
O'CarrollS.JinZ. M.DowsonD.FisherJ.JobbinsB.Determination of contact area in ‘cushion form’ bearings for artificial hip joints. Proc. Instn Mech. Engrs Part H: J. Engineering in Medicine, 1990, 204(H4), 217–223.
2.
JinZ. M.DowsonD.FisherJ.Stress analysis of cushion form bearings for total hip replacements. Proc. Instn Mech. Engrs Part H: J. Engineering in Medicine, 1991, 205(H4), 219–226.
3.
StewartT.JinZ. M.FisherJ.Analysis of contact mechanics for composite cushion knee joint replacements. Proc. Instn Mech. Engrs Part H: J. Engineering in Medicine, 1998, 212(H1), 1–10.
4.
HartmannS.TschopeT.SchreiberL.HauptP.Finite deformations of a carbon black-filled rubber. Experiment, optical measurement and material parameter identification using finite elements. Eur. J. Mech. Solids, 2003, 22(3), 309–324.
5.
Laraba-AbbesF.IennyP.PicquesR.A new ‘tailor-made’ methodology for the mechanical behaviour analysis of rubber-like materials: II. Application to the hyperelastic behaviour characterization of a carbon-black filled natural rubber vulcanizate. Polymer, 2003, 44, 821–840.
6.
ChenT. L.DurelliA. J.Stress field in a sphere subjected to large deformations. J. Solid Structs, 193, 9, 1035–1052.
7.
JamesA. G.GreenA.Strain energy functions of rubber. II. The characterisation of filled vulcanizates. J. Appl. Polym. Sci., 1975, 19, 2319–2330.
8.
MSC.Software Corporation.MSC.Marc experimental elastomer analysis - material test data fittingProduct documentation revision, vol. 85, June 2000, ch. 5.
9.
StrozziA.Contact stresses in hip replacements. PhD Thesis, School of Engineering and Applied Science, University of Durham, 1992.
10.
FishmanK. L.MachmerD.Testing techniques for measurement of bulk modulus. J. Test. Eval., 1994, 22, 161–167.
11.
HolowniaB. P.Effect of different types of carbon black on elastic constants of elastomers. Plast. Rubber: Mater. Applics, August 1980, 129–132.
12.
PengS. H.ShimboriT.NaderiA.Measurement of elastomer's bulk modulus by means of a confined compression test. Rubber Chem. Tech., 1994, 67, 871–879.
13.
GilmourI.TrainorA.HawardR. N.The determination of the bulk modulus in a constrained solid. J. Polym. Sci., 1974, 12, 1939–1940.
14.
GMN6814. Standard test methods for vulcanised rubber and TPE for use in finite element analysis modellingDecember 2002 (GM Engineering Standard, General Motors Corporation).
15.
TreloarL. R. G.The elasticity of a network of long chain molecules II. Trans. Faraday Soc., 1943, 39, 241–246.
16.
BlatzP. J.KoW. L.Application of finite elastic theory to the deformation of rubbery materials. Trans. Soc. Rheol., 1962, 6, 223–251.
17.
ParsonsM. W.PascoeK. J.Development of a biaxial fatigue test rig. J. Strain Analysis, 1975, 10, 1–9.
18.
JanssonS.Biaxial test facility for creep crack growth in damaged material. J. Strain Analysis, 1984, 19(3), 147–152.
19.
TerryG.The biaxial tensile strain field from a conventional load-splitting tree. Strain, 1979, 13(3), 110–112.
20.
BoehlerJ. P.DemmerleS.KossS.A new direct biaxial testing machine for anisotropic materials. Expl Mechanics, 1994, 34(1), 1–9.
21.
MönchE.GalsterD.A method for producing a defined uniform biaxial tensile stress field. Br. J. Appl. Physics, 1963, 14(11), 810–812.
22.
WilliamsJ. G.Stress analysis of polymers, 1973 (Longman Group Ltd, USA).
23.
Nic An GhaillN.The development of procedures and techniques for the stress analysis of elastomers with applications in total joint replacements. PhD Thesis, College of Engineering, University of Limerick, 2006.
24.
StrozziA.UnsworthA.Axisymmetric finite element analysis of hip replacement with an elastomeric layer: The effects of layer thickness. Proc. Instn Mech. Engrs Part H: J. Engineering in Medicine, 1994, 208(H3), 139–148.
