Tetrahedral finite element meshes with smooth surfaces can be created from computed tomography scans of cancellous bone in order to evaluate its mechanical properties. Image processing before creation of the mesh can affect the accuracy of determined mechanical properties. For a cancellous bone analogue, threshold, mesh density and surface smoothing parameters used in mesh generation were varied and the mechanical properties predicted by the resulting meshes were compared to experimental results. This study has shown that threshold selection is vital for accurate determination of volume fraction and resulting mechanical properties.
HuiskesR.RuimermanR.van LentheG. H.JanssenJ. D.Effects of mechanical forces on maintenance and adaptation of form in trabecular bone. Nature, 2000, 405(6787), 704–706.
2.
VanrietbergenB.WeinansH.HuiskesR.OdgaardA.A new method to determine trabecular bone elastic properties and loading using micro-mechanical finite-element models. J. Biomechanics, 1995, 28(1), 69–81.
3.
PistoiaW.Van RietbergenB.LochmullerE. M.LillC. A.EcksteinF.RuegseggerP.Estimation of distal radius failure load with micro-finite element analysis models based on three-dimensional peripheral quantitative computed tomography images. Bone, 2002, 30(6), 842–848.
4.
NieburG. L.FeldsteinM. J.YuenJ. C.ChenT. J.KeavenyT. M.High-resolution finite element models with tissue strength asymmetry accurately predict failure of trabecular bone. J. Biomechanics, 2000, 33(12), 1575–1583.
5.
Alonso VazquezA.Van LentheG. H.TaylorM.MullerR.Comparison of μCT measurements and FE predictions of localised failure in a cancellous bone analogue material. In Sixth International Symposium on Computer methods in biomechanics and biomedical engineering (Eds MiddletonJ.ShriveN. G.JonesM. L.), 2004, pp. 1–5 (FIRST Numerics, Madrid).
6.
MullerR.GerberS. C.HayesW. C.Micro-compression: A novel technique for the nondestructive assessment of local bone failure. Technol. and Health Care, 1998, 6, 433–444.
7.
Van RietbergenB.Micro-FE analysis of the bone: State of the art. Advs Expl Medicine and Biology, 2001, 496, 21–30.
8.
KetchamR.CarlsonW. D.Acquisition, optimization and interpretation of X-ray computed tomographic imagery: Applications to the geosciences. Computers and Geosciences, 2001, 27, 381–400.
9.
Van RietbergenB.Micro-FE analyses of bone: State of the art. In Noninvasive assessment of trabecular bone architecture and the competence of bone (Eds MajumdarS.BayB.), 2001, pp. 21–30 (Kluwer Academic).
10.
YoussefS.MaireE.GaertnerR.Finite element modelling of the actual structure of cellular materials determined by X-ray tomography. Acta Materialia, 2005, 53, 719–730.
FreyP. J.BorouchakiH.GeorgeP. L.3D Delaunay mesh generation coupled with an advancing-front approach. Computer Meth. Appl. Mechanics and Engng, 1998, 157(1-2), 115–131.
13.
LorensenW. E.ClineH. E.Marching cubes: A high resolution 3D surface construction algorithm. Computer Graphics, 1987, 21(4), 163–169.
14.
KeavenyT. M.MorganE. F.NieburG. L.YehO. C.Biomechanics of trabecular bone. Ann. Rev. Biomed. Engng, 2001, 3, 307–333.
15.
HaraT.TanckE.HommingaJ.HuiskesR.The influence of microcomputed tomography threshold variations on the assessment of structural and mechanical trabecular bone properties. Bone, 2002, 31(1), 107–109.
16.
ZhouJ.ShrotriyaP.SoboyejoW. O.Mechanisms and mechanics of compressive deformation in open-cell Al foams. Mechanics of Mater., 2004, 36(8), 781–797.
