Stereolithography (STL) models of complex cancellous bone structures have been produced from three-dimensional micro-computed tomography data sets of human cancellous bone histological samples from four skeletal sites. The STL models have been mechanically tested and the derived stiffness compared with that predicted by finite element analysis. The results show a strong correlation (R2 = 0.941) between the predicted and calculated stiffnesses of the structures and show promise for the use of STL as an additional technique to complement the use of finite element models, for the assessment of the mechanical properties of complex cancellous bone structures.
HuiskesR.HollisterS. J.From structure to process, from organ to cell: Recent developments of FE-analysis in orthopaedic biomechanicsJ. Biomech. Engng, 1993, 115, 520–527.
2.
DobsonC.A.LangtonC. M.FaganM. J.Simulation of cancellous bone remodelling, structure and biomechanical stresses associated with osteoporosis: A reviewJ. Computer Simulation Modelling Medicine, 2000, 1 (2), 79–97.
3.
SisiasG.PhillipsR.DobsonC. A.FaganM. J.LangtonC. M.Tessellation and contour extraction algorithms for rapid prototyping replication of 3D-μ;CT reconstructions of cancellous boneRapid Prototyping J., 2002, 8 (1), 6–24.
4.
DobsonC.A. Finite element analysis and simulation of the structural changes in cancellous bone with osteoporosis, PhD thesis, University of Hull, 2001.
5.
KeavenyT.M.BorchersR. E.GibsonL. J.HayesW. C.Theoretical analysis of the experimental artifact in trabecular bone compressive modulusJ. Biomechanics, 1993, 26, 599–607.
6.
Van RietbergenB.HuiskesR.WeinansH.OdgaardA.KabelJ.The role of trabecular architecture in the anisotropic mechanical properties of bone In Bone Structure and Remodeling, Recent Advances in Human Biology, Vol. 2 (Eds OdgaardA.WeinansH.), 1994, 137–145 (World Scientific, Singapore).
7.
LangtonC.M.WhiteheadM. A.LangtonD. K.LangleyG.Development of a cancellous bone structural model by stereolithography for ultrasound characterisation of the calcaneusMed. Engng Physics, 1997, 19 (7), 599–604.
8.
LangtonC.M.WhiteheadM. A.HaireT. J.HodgskinsonR.Fractal dimension predicts broad-band ultrasound attenuation in stereolithography models of cancellous bonePhysics Medicine Biology, 1998, 43, 467–471.
9.
HaireT.J.HodgskinsonR.GanneyP. S.LangtonC.M.A comparison of porosity, fabric and fractal dimension as predictors of the Young's modulus of equine cancellous boneMedical Engng Physics, 1998, 20 (8), 588–593.
10.
IssaB.GibbsP.HodgskinsonR.LangtonC. M.TurnbullL. W.Assessment of the pore geometry of stereolithography models by high resolution MRIMag. Resonance Imaging, 1998, 16 (5–6), 651–653.
11.
BorahB.GrossG. J.DufresnesT. E.SmithT. S.CockmanM. D.ChmielewskiP. A.LundyM. W.HartkeJ. R.SodE. W.Three-dimensional microimaging(MRμI and μCT), finite element modelling and rapid prototyping provide insights into bone architecture in osteoporosis. Anatomical Rec. (New Anat.), 2001, 265, 101–110.
12.
ZyssetP.K.MarsanA. L.ChuT.-M. G.GuldbergR. E.HalloranJ. W.HollisterS. J.Rapid prototyping of trabecular bone for mechanical testing. In Proceedings of the 1997 Bioengineering Conference, Sun River, Oregon, USA, 11–15 June 1997, BED Vol. 35, p. 387 (American Society of Mechanical Engineers, New York).
