There is a wide choice of materials available for restorative dentistry covering a range of requirements. Fundamental knowledge about the properties of the polymers in use in dentistry is an advantage as it provides information relevant to clinical practice. Dentistry, perhaps, has the unique distinction of using the widest variety of materials, ranging from polymers, metal and metal alloys, ceramics, inorganic salts and composite materials. In the present paper, polymers and polymer composites used directly or indirectly for restorations, prostheses or for production of appliances in dentistry is discussed.
TrongV. T.ThomaszF. G. V.Comparison of denture acrylic resins cured by boiling water and microwave energy. Aust. Dent. J., 1988, 33, 201–204.
8.
MurphyW. M.BatesJ. F.HuggetR.BrightR.A comparative study of three denture base materials. Br. Dent. J., 1982, 152, 273.
9.
GutteridgeD. L.The effect of including ultra-high-modulus polyethylene fibre on the impact strength of acrylic resin. Dent. Mater., 1988, 164, 177–180.
10.
PolyzoisG. L.AndreopoulosA. G.LagouvardosP. E.Acrylic resin repair with adhesive resin and metal wires, effects on strength parameters. J. Prosthetic Dentistry, 1996, 75, 381–387.
11.
HarsanyiB. B.FoongW. C.HowellR. E.HidiP.JonesD. W.Hamster cheek-pouch testing of dental soft polymers. J. Dent. Res., 1991, 70, 991–996.
12.
WrightP. S.Characterisation of the adhesion of soft lining materials to poly(methylmethacrylate). J. Dent. Res., 1982, 61, 1002–1005.
13.
BradenM.WrightP. S.Water absorption and water solubility of soft lining materials for acrylic dentures. J. Dent. Res., 1983, 62, 764–768.
14.
RiggsP. D.ParkerS.BradenM.KalachandraJ.Influence of additives on the water uptake of hydrosilanized silicone rubbers. Biomaterials, 1997, 18, 721–726.
15.
LitchfieldJ.WoodL. G.Br. Pat. 983 817, 1965.
16.
BradenM.PearsonG. P.Analysis of aqueous extract from filled resins. J. Dent. Res., 1981, 9, 141–143.
17.
ParkerS.RiggsP. D.BradenM.KalachandraS.TaylorD. F.Water uptake in soft lining materials from osmotic solutions. J. Dentistry, 1997, 25, 297–304.
18.
BradenM.WrightP.S.Water absorption and water solubility of soft lining materials for acrylic dentures. J. Dent. Res., 1986, 62, 764–768.
19.
WatersM. G. J.JaggerR. G.WinterR. W.Effect of surface modified fillers on the water absorption of a (RTV) silicone denture soft lining material. J. Dentistry, 1996, 24, 297–300.
20.
KalachandraS.MintonR. J.TakamataT.TaylorD. F.Characterisation of commercial soft lining materials by dynamic mechanical analysis. J. Mater. Sci.: Mater. Med., 1995, 6, 218–222.
21.
BradenM.ClarkeR. L.Visco-elastic properties of some room temperature polymerizing resins. J. Dent. Res., 1982, 61, 997–1001.
22.
WagnerW. C.KawanoF.DootzE. R.Dynamic viscoelastic properties of processed soft denture liners: Part II—Effect of ageing. J. Prosthetic Dentistry, 1995, 74, 299–304.
23.
CrollT.CavanaughR.Direct bonded class I restorations and sealants—six options. Quintessence Int., 1997, 28, 157–168.
AntonucciJ. M.GriffithJ. R.PeckooR. J.TerminiD. J.Synthesis of polyfluorinated polymethyl methacrylates for dental application. J. Dent. Res., 1979, 58, Abstract 599.
29.
ShobhaK.SankarapandianM.KalachandraS.TaylorD. F.McGrathJ. E.Structure property relationship among novel dental composite matrix resin. J. Mater. Sci.: Mater. Med., 1997, 8, 385–389.
30.
SankarapandianM.ShobhaH. K.KalachandraS.McGrathJ. F.TaylorD. F.Characterization of some aromatic dimethacrylates for dental composite applications. J. Mater. Sci.: Mater. Med., 1997, 8, 465–468.
31.
DavyK. W.M.BradenM.Study of polymeric systems based on 2, 2 bis-4 (2 hydroxy-3-methacryloyl-oxy propoxy)-phenyl propane. Biomaterials, 1991, 12, 406–410.
32.
BradenM.DavyK. W. M.Water absorption of some unfilled resins. Biomaterials, 1986, 7, 474–475.
33.
SoderholmK. J.Filler leachability during water storage of six composite materials. Scand. J. Dent. Res., 1990, 98, 82–88.
34.
BraemM.LambrechtsP.VanherleG.DavidsonC.Stiffness increase during the setting of dental composite resins. J. Dent. Res., 1987, 66, 1713–1716.
35.
PlueddemannF. P.Silane Coupling agents, 1982, pp. 167 (Plenum Press, New York).
36.
JohanssonO. K.StarkF. O.VogelG. E.FleschmannR. M.Evidence for chemical bond formation at silane coupling agent interface. J. Compost. Mater., 1967, 1, 278–292.
37.
AtsutaM.AbellA. K.TurnerD. T.NakabayashiN.TakeyamaM.A new coupling agent for composite materials: 4-methacryloxyethyl trimellitic anhydride. J. Biomed. Mater. Res., 1982, 16, 619–628.
38.
YoshidaK.GreenerE. H.Effects of coupling agents on mechanical properties of metal oxide-polymethacrylate composites. J. Dent. Res., 1994, 22, 57–62.
39.
TairaM.UrabeH.HirosoT.WakasaK.YomakiM.Analysis of photo-initiators in visible light cured dental composite resins. J. Dent. Res., 1988, 67, 24–28.
40.
CohenS. G.ChaoH. M.Photoreduction of aromatic ketones by amines. Studies of quantum yields and mechanism. J. Am. Chem. Soc., 1968, 90, 165–173.
41.
LedwithA.Photoinitiation of polymerization. Pure Appl. Chem., 1977, 49, 431–441
42.
AsmussenE.Factors affecting the quantity of remaining double bonds in restorative resin polymers. Scand. J. Dent. Res., 1982, 90, 490–496.
43.
AsmussenE.Restorative resins: Hardness and strength vs. quantity of remaining double bonds. Scand. J. Dent. Res., 1982, 90, 484–489.
44.
PeutzfeldtA.AsmussenE.Hardness of restorative resins: Effect of camphorquinone, amine and inhibitor. Acta Odontol Scand., 1989, 47, 229–231.
45.
YoshidaK.GreenerE. H.Effect of photoinitiator on degree of conversion of unfilled light-cured resin. J. Dentistry, 1994, 22, 296–299.
46.
YoshidaK.GreenerE. H.Effects of two amine reducing agents on the degree of conversion and physical properties of an unfilled light cured resin. Dent. Mater., 1993, 9, 246–251.
47.
SustercicD.CevcP.FundukN.PintarM. M.Determination of curing time in visible-light-cured composite resins of different thickness by electron paramagnetic resonance. J. Mater. Sci.: Mater. Med., 1997, 8, 507–510.
48.
AnsethK. S.GoodnerM.-D.ReilM. A.KannurpattiA. R.NewmanS. M.BowmanC. N.The influence of comonomer composition on dimethacrylate resin properties for dental restorations. J. Dent. Res., 1996, 75, 1607–1612.
49.
HiltonT.SchwatzR.FerracaneJ.Microleakage of four class II resin composite insertion techniques at intra oral temperatures. Quintessence Int., 1997, 28, 135–144.
50.
KalachandraS.TaylorD. F.DeporterC. D.GrubbsH. J.McGrathJ. E.Polymeric materials for composite matrices in biological environments. Polymer, 1993, 34, 778.
51.
VenzS.DickensB.NIR-spectroscopic studies of water sorption characteristics of dental resins and composites. J. Biomed. Mater. Res., 1991, 25, 1231–1248.
52.
PearsonG. J.Long term sorption and solubility of composite filling materials. J. Dent. Res., 1979, 7, 64–68.
53.
LaiJ. H.JohnsonA. E.Measuring polymerisation shrinkage of photo-activated restorative materials by a water filled dilatometer. Dent. Mater., 1993, 9, 139–143.
54.
SpahlW.BudzikiewiczH.GeurtsenW.Extractable residual monomers from various resin materials—a qualitative study (abstract). J. Dent. Res., 1994, 73, 295.
55.
WattsD. C.McAndrewR.LloydC. H.Thermal diffusivity of composite restorative materials. J. Dent. Res., 1987, 67, 1576–1578.
56.
LeinfelderK.Posterior composite resins: The materials and their clinical performance. JADA, 1995, 126, 663–676.
57.
StanleyH.Effects of dental restorative materials: Local and systemic responses reviewed. JADA, 1993, 124, 77–80.
58.
van NoortR.Introduction to Dental Materials, 1994 (Mosby, Times Mirror International Publishers, London).
59.
WattsA.PatersonR. C.A review of current proprietary bonding systems. Restorative Dentistry, August 1991, 56–61.
60.
AntonucciJ. M.BrauerG. M.TermimiD. J.Isocyanato urethane methacrylates derived from hydroxyethyl methacrylate. J. Dent. Res., 1980, 59, 35–43.
61.
BrauerG. M.LeeC. H.Methacrylate oligomers with pendant isocyanate groups as tissue adhesives. Polym. Mater. Sci. Engng, 1988, 59, 397–401.
62.
BrauerG. M.LeeC. H.Oligomers with pendant isocyanate groups as tissue adhesives II. Adhesion to bone and other tissue. J. Biomed. Mater. Res., 1989, 23, 753–763.
63.
ByerleyT. J.FanskaC. B.EickJ. D.Isocyanatoacrylates: A new multifunctional adhesive: Monomer synthesis and polymerization. J. Dent. Res., 1990, 69, 116.
64.
ChappelowC. C.ByerleyT. J.PinzinoC. S.MillichF.EickJ. D.Design and development of isocyanatacrylates as dental adhesives. J. Dent. Res., 1996, 75, 761–767.
65.
ZengW.HondaN.SuzukiS.Evaluation of a radio-paque 4-META/MMA-TBB adhesive resin. J. Dent. Res., 1997, 76, 3229.
66.
BurkeF. J.T.Al-SalehiS. K.A review of test methods in 50 dentine bond test publications. J. Dent. Res., 1997, 76, 191.
67.
RuzickovaT.StaininecM.MarshallG. W.HuttonJ. E.Bond strengths of the adhesive resin-amalgam surface. Am. J. Dent., 1997, 10, 192–194.
68.
NeryS.McCabeJ. F.WassellR. W.A comparative study of 3 dental adhesives. J. Dent. Res., 1995, 23, 55–61.
ChaiJ.PangI. C.LeongD.KimJ. E.TorresP.An investigation of the rheological properties of 10 poly vinyl siloxane impression materials. J. Prosthodontics, 1993, 2 (3), 167–173.
71.
MillarB. J.DunneS. M.RobinsonP. B.An in vivo study of a clinical surfactant used with poly(vinylsiloxane) impression materials. Quintessence Int., 1996, 27, 707–709.
72.
MillarB. J.DunneS. M.RobinsonP. B.The effect of a surface wetting agent on void formation in impressions. J. Prosthetic Dentistry, 1997, 77, 54–56.
73.
TjanA. H.Clinically oriented evaluation of the accuracy of commonly used impression materials. J. Prosthetic Dentistry, 1986, 56, 4.
74.
CullenD. R.MikesellJ. W.SandrikJ. L.Wettability of elastomeric impression materials and voids in gypsum casts. J. Prosthetic Dentistry, 1991, 66, 261–265.
KaplanB. A.GoldsteinG. R.BoylanR.Effectiveness of a professional formula disinfectant for an irreversible hydrocolloid. J. Prosthetic Dentistry, 1994, 71, 603–606.
77.
ThouatiA.DeveauxE.IostA.BehinP.Dimensional stability of seven elastomeric impression materials immersed in disinfectants. J. Prosthetic Dentistry, 1996, 76 (1), 8–14.
78.
ChristensenW. G.ChristensenR. P.JacobJ. S.Marginal fit of nine impression materials after disinfection. J. Dent. Res., 73, 397 (Abstract) 2363.
