In the area of orthopaedic implants, particularly total hip joint replacements, a metal-plastic combination is still the most popular choice consisting of a femoral head fabricated from 316L stainless steel, Ti alloy or Co-Cr alloy in contact with an ultra-high molecular weight polyethylene (UHMWPE) acetabular cup. It is recently considered that wear of the UHMWPE cup is of major concern. Generation of the wear debris can have adverse effects on the body, both localized and systemic. It is envisaged that wear of the prosthetic components, particularly those fabricated from UHMWPE can be reduced through the use of surface coatings.
The aim of this investigation was to deposit a selection of refractory element nitride-based coatings (TiN, TiAIN, ZrN) onto 316L stainless steel substrates, using physical vapour deposition (PVD) technology and to study their sliding wear behaviour in contact with both UHMWPE and 316L stainless steel pins, using a pin-on-plate testing rig. Tests were conducted in Ringers solution and Ringers solution plus bone cement particles. The volume of material removed from the pins served as an indication of their wear behaviour. Wear mechanisms were identified using scanning electron microscopy. The results of these findings and the potential for these coatings to be used in orthopaedic applications are discussed.
DowlingJ. M.AtkinsonJ. R.DowsonD.CharnleyJ.Characterisation of worn polyethylene acetabular cups in relation to service time in the human body. In Mechanical Properties of Biomaterials (Eds HastingsG. W.WilliamsD. F.), 1980, pp. 39 (John Wiley, Chichester).
2.
GibbonsD. F.AndersonJ. M.MartinR. L.NelsonT.Wear and degradation of retrieved ultra high molecular weight polyethylene and other polymeric implant materials. In Corrosion and Degradation of Implant Materials (Eds SyrettB. C.AcharyaA.), ASTM STP 684, 1979, pp. 20 (American Society for Testing and Materials, Philadelphia, Pennsylvania).
3.
DowlingJ. M.AtkinsonJ. R.CharnleyJ.DowsonD.The characteristics of acetabular cups worn in the body. J. Bone Jt Surg., 1978, 60B, 375.
4.
SaikkoV.Wear and friction properties of prosthetic joint materials evaluated on a reciprocating pin-on-flat apparatus. Wear, 1993, 166, 169.
5.
WinterG. D.Wear and corrosion products in tissues and the reactions they provoke. In Biocompatibility of Implant Materials (Ed. WilliamsD. F.), 1976, pp. 28 (Sector Publishing, London).
6.
WalkerP. S.SalvatiE.HotzlerR.The wear on removed Mckee-Farrar total hip prostheses. J. Bone Jt Surg., 1974, 56A, 92.
7.
YamageM.PerrenS. M.Influence of metal salts on immune responses ‘in-vitro’. In Biomaterials and Biomechanics (Eds DucheyneP.Van der PerreG.AubertA. E.), 1983, pp. 227 (Elsevier Science, Amsterdam).
8.
BrownS. A.MerrittK.FarnsworthL. J.CroweT. D.An ‘in-vivo’ model for quantification of metal ion release and transport. In Biomaterials and Clinical Applications (Eds PizzoferratoA.MarchettiP. G.RavaglioliA.LeeA. J. C.), 1987, pp. 717 (Elsevier Science, Amsterdam).
9.
MerrittK.Allergic reactions to materials used in prosthetic surgery. In Biomaterials and Clinical Applications (Eds PizzoferratoA.MarchettiP. G.RavaglioliA.LeeA. J. C.), 1987, pp. 711 (Elsevier Science, Amsterdam).
10.
VreeburgK. J. J.de GrootK.BurgC. K.H.V.ScheperR. J.Immunological aspects of contact hyper-sensitivity to Ni-Cr dental alloys. In Biological and Biomechanical Performance of Biomaterials (Eds ChristelP.MeunierA.LeeA. J. C.), 1986, pp. 415 (Elsevier Science, Amsterdam).
11.
MerrittK.BrownS. A.Effect of valence of chromium on biological responses. In Biomaterials and Biomechanics (Eds DucheyneP.Van der PerreG.AubertA. E.), 1983, pp. 221 (Elsevier Science, Amsterdam).
12.
OppenheimerB. S.OppenheimerE. T.DanishefskyI.StoutA. P.Carcinogenic effect of metals in rodents. Cancer Res., 1956, 16, 439.
13.
MusilJ.KadlecS.MunzW. D.Unbalanced magnetrons and new sputtering systems with enhanced plasma ionization. J. Vac. Sci. Technol., 1991, A9 (3), 1171.
PilliarR. M.Preliminary experience with a total knee prosthesis with porous coating. Clin. Orthop., 1983, 176, 95.
17.
EnghC. A.Hip arthroplasty with a Moore prosthesis with a porous coating. Clin. Orthop., 1983, 176, 52.
18.
FrakerA. C.BaileyA. J.HahnH.RoweR. H.Jr.Corrosion fatigue behaviour of porous coated Ti-6Al-4V implant materials. In 2nd World Congress onBiomaterials, Washington, DC, 27 April-1 May, 1984, pp. 169.
19.
BrossaF.LoomanB.PietraR.SabbioniE.The use of titania and alumina as protective coatings on metallic prostheses to prevent metal release. In Ceramics in Clinical Applications (Ed. VincenziniP.), 1987, pp. 99 (Elsevier Science, Amsterdam).
LacefieldW. R.Hydroxyapatite coatings. InBioceramics: Material Characteristics Versus ‘In-Vivo’ Behaviour (Eds DucheyneP.LemonsJ. E.), Ann. N. Y. Acad. Sci., 1988, 523, 72.
22.
KrajewskiA.RavaglioliA.PeruginiG.Bioglass compositions as coatings for metal prostheses. Sci. Ceram., 1981, 11, 85.
23.
RavaglioliA.KrajewskiA.Biophysicochemical problems connected with the metallic prostheses coated with bioglasses. In 2nd World Congress onBiomaterials, Washington, D.C., 27 April-1 May 1984, pp. 285.
24.
GluecszJ.JadrkowiakJ.MasalskiJ.PopytakW.InSurface Engineering Practice—Processes, Fundamentals and Applications in Corrosion and Wear (Eds StraffordK. N.DattaP. K.GrayJ. S.), 1990, pp. 233 (Ellis Horwood, Chichester).
25.
WardL. P.WilksT. P.SubramanianC.StraffordK. N.McPheeM. A.Observations on the characterisation and mechanical properties of TiN, CrN and TiAIN coatings in relation to the performance of tools used in manufacturing industry. In Proceedings of 2nd International Conference onSurface Engineering, Adelaide, 7–10 March 1994, p. C522.
26.
WardL. P.StraffordK. N.SubramanianC.WilksT. P.Observations on the structure, hardness and adhesion properties of a selection of multi-component refractory element nitride coatings. J. Mater. Process. Technol., 1996, 56, 375.
27.
SubramanianC.StraffordK. N.WilksT. P.WardL. P.McMillanW.Influence of substrate roughness on the scratch adhesion of titanium nitride coatings. Surf. Coat. Technol., 1993, 62, 529.
28.
WardL. P.StraffordK. N.WilksT. P.SubramanianC.ParryT.The sliding wear behaviour of TiN, TiAIN and ZrN coated Ti-6Al-4V alloy for use as load bearing implants. Trans. Mech. Engng Tribology, IEAust, 1995, ME20, 107.
29.
WardL. P.Studies of ion-plated coatings for biomedical applications. PhD thesis, University of Northumbria at Newcastle, 1991.
30.
McKellopH.ClarkeI. C.MarkolfK. L.AmstutzH. C.Wear characteristics of UHMW polyethylene: A method for accurately measuring extremely low wear rates. J. Biomed. Mater. Res., 1978, 12, 895.
