Sage Journals: Discover world-class research

Abstract

This paper describes the use of computer modelling and simulation during the design and development of a motorized upper limb orthotic system to be used to aid the dysfunctional human arm. The orthosis consisted of a three-degree-of-freedom shoulder module and a lower arm module providing movements at the elbow and wrist.

Simulation software has been used to model the mechanism created by the connection of the orthosis and the arm. With this model it has been possible to analyse the kinematics and kinetics of both the arm and orthosis during a variety of dynamic loading conditions. In particular, the power requirements of the orthotic joints during the execution of specific tasks have been determined and these data have been used to specify the motors of a working prototype. The effect of misalignment between real and orthotic shoulder joints has also been investigated and a potentially hazardous situation has been highlighted prior to testing of the prototype by a volunteer in the laboratory.

Keywords

arm linkage mechanism orthotics kinematics dynamics computer simulation

Get full access to this article

View all access options for this article.

References

Romilly

D. P.

Anglin

Gosine

R. G.

Hershler

Raschke

S. U.

A functional task analysis and motion simulation for the development of a powered upper limb orthosis. IEEE Trans., Rehab. Engng, 1994, 2 (3), 119–128.

Pheasant

Bodyspace—Anthropometry, Ergonomics and Design, 1988 (Taylor and Francis, London).

Pronk

The shoulder girdle analysed and modelled kinematically. PhD thesis, Faculty of Mechanical Engineering and Marine Technology, Delft University of Technology, 1991.

Högfors

Sigholm

Herberts

P. J.

Biomechanical model of the human shoulder—1 Elements. J. Biomechanics, 1987, 20, 157–166.

Perry

Muscle control of the shoulder. In The Shoulder (Ed. Rowe

C. R.

), 1988, pp. 17–34 (Churchill Livingstone, New York).

Dempster

W. T.

Mechanisms of shoulder movement. Arch. Phys. Med. Rehabil., 1965, 46 (1A), 49–70.

Piper

D. L.

The kinematics of manipulators under computer control. PhD thesis, Stanford University Computer Science Department, Stanford, California, 1968.

Marchese

S. S.

Buckley

M. A.

Valleggi

Johnson

G. R.

An optimised design of an active orthosis for the shoulder—an iterative approach. Proceedings of the 5th International Conference on

Rehabilitation Robotics, Bath, April 1997.

Buckley

M. A.

Yardley

Johnson

G. R.

Carus

D. A.

Dynamics of the upper limb during performance of the tasks of everyday living—a review of the current knowledge base. Proc. Instn Mech. Engrs, Part H, 1996, 210 (H4), 241–247.

10.

Inman

V. T.

Saunders

J. B.

Abbott

L. C.

Observations on the function of the shoulder joint. J. Bone Jt Surg., 1944, 26, 1–30.

Computer simulation of the dynamics of a human arm and orthosis linkage mechanism

Abstract

Abstract

Keywords

Get full access to this article

References