Degradation of tibial inserts in vivo has been found to be multifactorial in nature, resulting in a complex interaction of many variables. A range of kinematic conditions occurs at the tibio-femoral interface, giving rise to various degrees of rolling and sliding at this interface. The movement of the tibio-femoral contact point may be an influential factor in the overall wear of ultra-high molecular weight polyethylene (UHMWPE) tibial components. As part of this study a three-station wear-test machine was designed and built to investigate the influence of rolling and sliding on the wear behaviour of specific design aspects of contemporary knee prostheses. Using the machine, it is possible to monitor the effect of various slide-roll ratios on the performance of contemporary bearing designs from a geometrical and materials perspective.
Hospital In-Patient Enquiry (HIPE) and National Perinatal Reporting Scheme (NPRS) Unit, (The Economic and Social Research Institute (Department of Health and Children, Dublin, Ireland).
2.
Northern California surgeons pioneer computer-assisted, minimally invasive total knee replacement surgery. (Shasta Orthopaedics Press), http://www.shastaortho.com/press/release5.html, 2003.
3.
SchmalzriedT. P.JastyM.RosenbergA.HarrisW.Polyethylene wear debris and tissue reactions in knee as compared to hip replacement prostheses. J. Appl. Biomater., 1994, 5, 185–190.
4.
BoscoJ.BenjaminJ.WallaceD.Quantitative and qualitative analysis of polyethylene wear particles in synovial fluid of patients with total knee arthroplasty. Clin. Orthop. Related Res., 1994, 309, 11–19.
5.
SavvioJ. A.OvercampL. M.BlackJ.Size and shape of biomaterial wear debris. Clin. Mater., 1994, 15. 101–147.
6.
KobayashiA.FreemanM. A. R.BonfieldW.KadoyaY.YamacT.Al-SaffarN.ScottG.RevellP. A.Number of polyethylene particles and osteolysis in total joint replacement. J. Bone Jt Surg., 1997, 79-B, 844–848.
7.
KobayashiA.BonfieldW.KadoyaY.Al-SaffarN.ScottG.FreemanM. A.R.RevellP. A.Size and shape of particilate polyethylene wear debris in conforming tibiofemoral prostheses. In 21st Annual Meeting of the Society for Biomaterials, San Francisco, California, 1995.
8.
McGeeM. A.HowieD. WNealeS. D.HaynesD. R.PearcyM. J.The role of polyethylene wear on joint replacement failure. In Advances in Medical Tribology; Orthopaedic Implants and Implant Materials (Ed. DowsonD.), 1998 (Mechanical Engineering Publications, London), pp. 157–164.
9.
LaurentM. P.JohnsonT. S.YaoJ. Q.BlanchardC. R.CrowninshieldR. D.In vitro lateral versus medial wear of a knee prosthesis. Wear, 2003, 255 (7–12), 1101–1106.
10.
JohnsonT. S.LaurentM. P.YaoJ. Q.BlanchardC. R.Comparison of wear of mobile and fixed bearing knees tested in a knee simulator. Wear, 2003, 255 (7–12), 1107–1112.
11.
MazzuccoD.SpectorM.Effects of contact area and stress on the volumetric wear of ultrahigh molecular weight polyethylene. Wear, 2003, 254 (5–6). 514–522.
12.
EssnerA.KleinR.BushelowM.WangA.KvitnitskyM.MahoneyO.The effect of sagittal conformity on knee wear. Wear, 2003, 255 (7–12), 1085–1092.
13.
WangA.EssnerA.StarkC.DumbletonJ. H.A biaxial line-contact wear machine for the evaluation of implant bearing materials for total knee joint replacement. Wear, 1999, 225–229 (2), 701–707.
14.
BlunnG. W.JoshiA. B.LilleyP. A.EngelbrechtE.RydL.LidgrenL.HardingeK.NiederE.WalkerP. S.Polyethylene wear in unicondylar knee prostheses: 106 retrieved Marmor, PCA. and St George tibial components compared. Acta Orthopaedica Scand., 1992, 63 (3), 247–255
15.
TreharneR. W.YoungR. W.YoungS. R.Simulation of the knee joint using a computer controlled system. Engng Medicine, 1981, 10 (3), 137–142.
16.
RoseR. M.GoldfarbH. V.EllisE.CrugnolaA. M.On the pressure dependence of the wear of ultrahigh molecular weight polyethylene. Wear, 1983, 92, 99–111.
17.
DowsonD.EI-Hady DiabM. M.GillisB. J.AtkinsonJ. R.Influence of counterface topography on the wear of ultra high molecular weight polyethylene under wet or dry conditions. In Wear and its Control, Vol. 12, 1985. pp. 171–187 (American Chemical Society).
18.
DowsonD.TaheriS.WallbridgeN. C.The role of counterface imperfections in the wear of polyethylene. Wear, 1987, 119.277–283.
19.
WangA.StarkC.DumbletonJ. H.Mechanistic and morphological origins of ultra-high molecular weight polyethylene wear debris in total joint replacement prostheses. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 1996, 210 (H3), 141–155.
20.
BurgessI. C.KojarM.CunninghamJ. L.UnsworthA.Development of a six station knee wear simulator and preliminary wear results. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 1997, 210, 141–145.
SaikkoV.CaloniusO.Simulation of wear rates and mechanisms in total knee prostheses by ball-on-flat contact in a five-station, three-axis test rig. Wear, 2002, 253, 424–429.
23.
BlunnG. W.WalkerP. S.JoshiA.HardingeK.The dominance of cyclic sliding in producing wear in total knee replacements. Clin. Orthop. Related Res., 1991, 273, 253–260.
24.
BragdonC. R.O'ConnorD. O.LowensteinJ. D.JastyM.SyniutaW. D.The importance of multidirectional motion on the wear of polyethylene. Proc. Instn Mech. Engrs. Part H: J. Engineering in Medicine, 1996, 210, 157–165.
25.
WalkerP. S.BlunnG. W.LilleyP. A.Wear testing of materials and surfaces for total knee replacements. J. Biomed. Mater. Res., 1996, 33, 159–175.
26.
WangA.EssnerA.PolineniV. K.StarkC.DumbletonJ. H.Lubrication and wear of ultra-high molecular weight polyethylene in total joint replacements. Tribology Int., 1998, 31 (1–3), 17–33.
27.
RoseR. M.CiminoW. R.EllisE.CrugnolaA. N.Exploratory investigations of the structure dependence of the wear resistance of polyethylene. Wear, 1982, 77. 89–104.
28.
BarbourP. S. M.BartonD. C.FisherJ.The influence of stress conditions on the wear of UHMWPE for total joint replacements. J. Mater. Sci.: Mater. Medicine, 1997, 8, 603–611.
29.
BellC. J.WalkerP. S.AbeysunderaM. R.SimmonsJ. M. H.KingP. M.GordonG. W.Effect of oxidation on delamination of ultra high molecular weight polyethylene tibial components. J. Arthroplasty.1998, 13 (3), 280–290.
30.
WalkerP. S.Ben-DovM.AskewM. J.PughJ.The deformation and wear of plastic components in artificial knee joints—an experimental study. Engng in Medicine, 1981, 10 (1), 33–38.
31.
WangA.SunD. C.StarkC.DumbletonJ. H.Wear mechanisms of UHMWPE in total joint replacements. Wear, 1995, 181–183, 241–249.
