Contact mechanics of metal-on-metal hip implants employing a metallic cup with a UHMWPE backing

Abstract

The contact mechanics in metal-on-metal hip implants employing a cobalt chromium acetabular cup with an ultra-high molecular weight polyethylene (UHMWPE) backing were analysed in the present study using the finite element method. A general modelling methodology was developed to examine the effects of the interfacial boundary conditions between the UHMWPE backing and a titanium shell for cementless fixation, the coefficient of friction and the loading angle on the predicted contact pressure distribution at the articulating surfaces. It was found that the contact mechanics at the bearing surfaces were significantly affected by the UHMWPE backing. Consequently, a relatively constant pressure distribution was predicted within the contact conjunction, and the maximum contact pressure occurred towards the edge of the contact. On the other hand, the interfacial boundary condition between the UHMWPE backing and the titanium shell, the coefficient of friction and the loading angle were found to have a negligible effect on the contact mechanics at the bearing surfaces. Overall, the magnitude of the contact pressure was significantly reduced, compared with a similar cup without the UHMWPE backing. The importance of the UHMWPE backing on the tribological performance of metal-on-metal hip implants is discussed.

Keywords

contact mechanics metal-on-metal UHMWPE backing finite element method

Get full access to this article

View all access options for this article.

References

Amstutz

H. C.

Grigoris

Metal-on-metal bearings in hip arthroplasty. Clin. Orthop., 1996, 329S, 11–34.

Chan

F. W.

Bobyn

J. D.

Medley

J. B.

Krygier

J. J.

Tanzer

The Otto Aufranc Award—Wear and lubrication of metal-on-metal hip implants. Clin. Orthop. Related Res., 1999, 369, 10–24.

Smith

S. L.

Dowson

Goldsmith

A. A. J.

The effect of femoral head diameter upon lubrication and wear of metal-on-metal total hip replacements. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 2001, 215 (H2), 161–170.

McKellop

Park

S. H.

Chiesa

Doorn

Normand

Grigoris

Amstutz

In vivo wear of 3 types of metal on metal hip prostheses during 2 decades of use. Clin. Orthop., 1996, 329S, 128–140.

Farrar

Schmidt

M. B.

The effect of diametral clearance on wear between head and cup for metal-on-metal articulations. In 43rd Annual Meeting of the Orthopaedic Research Society, San Francisco, California, 1997, p. 71.

Besong

A. A.

Lee

Farrar

Jin

Z. M.

Contact mechanics of a novel metal-on-metal total hip replacement. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 2001, 215, 543–548.

Jin

Z. M.

Jagatia

Yew

Udofia

Contact mechanics and lubrication analysis of McKee-Farrar metal-on-metal hip implants. In 48th Annual Meeting of the Orthopaedic Research Society, 2002, paper 1015.

Rieker

Konrad

Schon

In vitro comparison of the two hard-hard articulations for total hip replacements. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 2001, 215 (H2), 153–160.

Jin

Z. M.

Dowson

Fisher

Analysis of fluid film lubrication in artificial hip joint replacements with surfaces of high elastic modulus. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 1997, 211, 247–256.

10.

Dowson

Lubrication regimes in total hip replacements. In Proceedings of the IMechE International Conference of Engineers and Surgeons, Joined at the Hip, 2002, paper C601/051/2002 (Professional Engineering Publishing, Bury St Edmunds and London).

11.

Bowsher

J. G.

Nevelos

Pickard

Shelton

J. C.

Hip simulator testing—the next generation? In Proceedings of the IMechE International Conference of Engineers and Surgeons, Joined at the Hip, 2002, paper C601/021/2002 (Professional Engineering Publishing, Bury St Edmunds and London).

12.

Kampen

Scholes

S. C.

Unsworth

The lubrication regime in a metal-on-metal total hip replacement. In Proceedings of the IMechE International Conference of Engineers and Surgeons, Joined at the Hip, 2002, paper C601/035/2002 (Professional Engineering Publishing, Bury St Edmunds and London).

13.

Walker

P. S.

Gold

B. L.

The tribology (friction, lubrication and wear) of all-metal artificial hip joints. Wear, 1971, 17, 285–299.

14.

Bartel

D. L.

Burstein

A. H.

Toda

M. D.

Edwards

D. L.

The effect of conformity and plastic thickness on contact stress in metal-backed plastic implants. Trans. ASME, J. Biomech. Engng, 1985, 107, 193–199.

15.

Jin

Z. M.

Dowson

Fisher

A parametric analysis of the contact stress in ultra-high molecular weight polyethylene acetabular cups. Med. Engng Physics, 1994, 16 (5), 398–405.

16.

Wang

Essner

Polineni

V. K.

Stark

Dumbleton

J. H.

Lubrication and wear of ultra-high molecular weight polyethylene in total joint replacements. Tribology Int., 1998, 31 (1–3), 17–33.

17.

Jagatia

Jin

Z. M.

Elastohydrodynamic lubrication of metal-on-metal hip prosthesis under steady-state entraining motion. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 2001, 215, 531–541.

18.

Walker

P. S.

Human Joints and their Artificial Replacements, 1977 (Charles C. Thomas).

19.

Scholes

S. C.

Unsworth

A comparison of friction and lubrication of different hip prostheses. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 2000, 214 (H1), 49–57.

20.

Bergmann

Deuretzbacher

Heller

Graichen

Rohlmann

Strauss

Duda

G. N.

Hip contact forces and gait patterns from routine activities. J. Biomechanics, 2001, 34 (7), 859–871.

21.

Jin

Z. M.

Heng

S. M.

H. W.

Auger

D. D.

An axisymmetric contact model of ultra-high molecular weight polyethylene cups against metallic femoral heads for artificial hip joint replacements. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 1999, 213 (H4), 317–327.

22.

Dorr

L. D.

Wan

Longjohn

D. B.

Dubois

Murken

Total hip arthroplasty with use of the Metasul metal-on-metal articulation. Four to seven-year results. J. Bone Jt Surg. (Am.), 2000, 82 (6), 789–798.

23.

Verdonschot

Vena

Stolk

Huiskes

Effects of metal-inlay thickness in polyethylene cups with metal-on-metal bearings. Clin. Orthop., 2002, 404, 353–361.

24.

Ingham

Fisher

Biological reactions to wear debris in total joint replacement. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 2000, 214 (H1), 21–37.