Extremely low wear rates have been reported for metal-on-metal total hip replacements, but concerns remain about the effects of metal ion release, dissolution rates and toxicity. Surface-engineered coatings have the potential to improve wear resistance and reduce the biological activity of the wear debris produced. The aim of this study was to examine the wear and wear debris generation from surface-engineered coatings: titanium nitride (TiN), chromium nitride (CrN) and chromium carbon nitride (CrCN) applied to a cobalt-chrome alloy (CoCr) substrate. The coatings were articulated against themselves in a simple geometry model. The wear particles generated were characterized and the cytotoxic effect on U937 macrophages and L929 fibroblasts assessed. The CrN and CrCN coatings showed a decrease in wear compared to the CoCr bearings and produced small (less than 40 nm in length) wear particles. The wear particles released from the surface engineered bearings also showed a decreased cytotoxic effect on cells compared to the CoCr alloy debris. The reduced wear volumes coupled with the reduced cytotoxicity per unit volume of wear indicate the potential for the clinical application of this technology.
WroblewskiB. M.Charnley low-friction arthroplasty. Review of the past, present status, and prospects for the future. Clin. Orthop. Related Res., 1986, 210, 37–42.
2.
GreenT.FisherJ.StoneM.WroblewskiB. M.InghamE.Polyethylene particles of a critical size are necessary for the induction of cytokines by macrophages in-vitro. Biomaterials, 1998, 19, 2297–2302.
3.
ShanbhagA.JacobsJ.BlackJ.GalanteJ.GlantT.Macrophage/particle interaction; effect of size, composition and surface area. J. Biomed. Mater. Res., 1994, 28, 81–90.
4.
WaitM. E.WalkerP. S.BlunnG. W.Tissue reaction to CoCr wear debris from metal on metal total hip replacements. Trans. Eur. Orthop. Res. Soc., 1995, 5, 160.
5.
SohE. W.BlunnG. W.WaitM. E.WalkerP. S.Size and shape of metal particles from metal-on-metal total hip replacements. Trans. Orthop. Res. Soc., 1996, 42, 462.
6.
DoornP. F.CampbellP. A.WorrallJ.BenyaP.SalibD.KirchenM.McKellopH.AmstutzH.Metal wear particle characterization from metal on metal total hip replacements: Transmission electron microscopy study of periprosthetic tissues and isolated particles. J. Biomed. Mater. Res., 1998, 42, 103–111.
7.
CatelasI.BobynJ. D.HojatollahV.MedleyJ. B.ZukorD. J.PetitA.HukO. L.Characterization of metal-metal wear particles isolated from a hip joint simulator. In Transcripts of 6th World Biomaterial Congress, 2000, Hawaii, p. 482.
8.
CatelasI.CampbellP.MedleyJ. B.ZukorD. J.HukO. L.BobynJ. D.Quantitative and compositional analysis of particles from metal-metal THRs. In Transcripts of 25th European Society of Biomaterials, 2001, Hawaii, p. 46.
9.
FirkinsP. J.TipperJ. L.SaadatzadehM. R.InghamE.StoneM. H.FarraR.FisherJ.Quantitative analysis of wear and wear debris from metal on metal hip prostheses tested in a physiological hip joint simulator. Bio. Med. Mater. Engng, 2001, 11, 143–157.
10.
FirkinsP. J.TipperJ. L.InghamE.StoneM. H.FarrarR.FisherJ.Influence of simulator kinematics on the wear of metal on metal hip prostheses. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 2001, 215 (H1), 119–121.
11.
InghamE.FisherJ.Biological reactions to wear debris in total joint replacement. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 2000, 214 (H1), 21–37.
12.
HowieD. W.Vernon-RobertsB.The synovial response of rats to intra-articular cobalt-chrome wear particles. Clin. Orthop., 1988, 232, 244–254.
13.
GlantT. T.JacobsJ. J.Response of three murine macrophage populations to particulate debris: Bone resorption in organ cultures. J. Orthop. Res., 1994, 12 (5), 720–731.
14.
HaynesD. R.RogersS. D.HayS.PearcyM. J.HowieD. W.The differences in toxicity and release of bone resorbing mediators induced by titanium and cobalt-chromium alloy wear particles. J. Bone Jt Surg., 1993, 75A, 825–834.
15.
GermainM. A.MatthewsJ. B.StoneM.FisherJ.InghamE.The effect of clinically relevant cobalt-chrome particles on the viability of human peripheral blood mono-nuclear cells and fibroblasts in-vitro. Proc. Eur. Soc. Biomater., 2001, T76.
16.
CollB.Surface modification of orthopaedic implants using TiN coatings. In 17th Annual Meeting of the Society for Biomaterials, Scotsdale, Arizona, May 1991.
17.
McKellopH.ClarkeI.MarkolfK.AmstutzH.Friction and wear properties of polymer, metal and ceramic prosthetic joint materials evaluated on a multichannel screening device. J. Biomed. Mater. Res., 1981, 15, 619–653.
18.
LappalainenR.AntillaA.HeinoneneH.Diamond coated total hip replacements. Clin. Orthop. Rel. Res., 1998, 352, 118–127.
19.
FirkinsP.HaileyJ.FisherJ.LettingtonA.ButterR.Wear of ultra-high molecular weight polyethylene against damaged and undamaged stainless steel and diamond like carbon coated counterfaces. J. Mater. Sci.; Mater. Medicine, 1998, 9, 597–601.
20.
CollB.JacquotP.Surface modification of medical implants and surface devices. Surface Coating Technology, 1988, 36 (3–4), 867–878.
21.
MullerM.The benefits of metal on metal hip replacements. Clin. Orthop. Related Res., 1995, 311, 54–59.
22.
HarmanM.BanksA.HodgeW.Wear analysis of a retrieved hip implant with titanium nitride coating. J. Arthroplasty, 1997, 12 (8), 938–945.
23.
RaimondiM.PietrabissaR.The in vivo wear performance of prostheitc femoral heads with TiN coating. Biomaterials, 2000, 21, 907–913.
24.
FarrarR.SchmidtM. B.MahiltonJ. V.GreerK. W.The development of low wear articulations. In Sirot Haifa Inter-meeting, 1999.
25.
TipperJ.FirkinsP.InghamE.FisherJ.StoneM.FarrarR.Quantitative analysis of wear and wear debris from low and high carbon content cobalt chrome alloys used in metal on metal total hip replacements. J. Mater. Sci.; Mater. Medicine, 1999, 10, 353–362.
26.
BesongA.JinZ.FisherJ.Importance of pin geometry on pin-on-plate wear testing of hard-on-hard bearing materials for artificial hip joints. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 2001, 215 (H6), 605–610.
27.
FisherJ.DowsonD.Tribiology of total artificial joints. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 1991, 205 (H2), 73–79.
28.
SokalR.RolhfF.Biometry, 3rd edition, 1995 (Freeman, New York).
29.
FisherJ.HuXWilliamsSTipperJ. L.StewartT.HattoP.StoneM. H.IsaacG.HardakerC.InghamE.Surface engineered metal on metal bearings for hip prostheses with reduced wear, wear debris and ion release. In Transcripts of 47th Annual Meeting ORS, Dallas, Texas, February 2002.
30.
MedleyJ. B.ChanF. W.KryglerJ. J.BobynD. J.Comparison of alloys and designs in a hip simulator study of metal on metal implants. Clin. Orthop. Related Res., 1996, 329S, S148–S159.
31.
ChanF. W.MedleyJ. B.BobynJ. D.KrygierJ.J.Time-varying fluid lubrication of metal-metal hip implants in simulator tests. ASTM STP 1346, 1998, pp. 111–128.
32.
CatelasI.BobynJ. D.MedleyJ. B.KrygierJ. J.ZukorD. J.PetitA.HukOEffects of digestion protocols on the isolation of metal-metal wear particles. I. Analysis of particle size and shape. J. Biomed. Mater. Res., 2001, 55, 320–329.
33.
HowlingG. I.MarrsH.SakodaH.StewartT. D.AppleyardS.RandB.FisherJ.InghamE.Wear and wear debris generated in novel carbon-carbon composites as potential acetabular cup bearing surfaces in artificial hip joints. Proc. Eur. Soc. Biomater., 2001, T37.
