Sage Journals: Discover world-class research

Abstract

The aim of this study was to manufacture life-size, flexible, tubular replicas of human abdominal aortic aneurysms and the associated vasculature, suitable for use in a training simulator for endovascular procedures. Selective laser sintering was used to create a geometrically correct master model for each of ten anatomical variations. The masters were used to generate flexible latex replicas. The use of the replicas in the training simulator was demonstrated. In total ten silicone rubber models were produced. When connected into the training simulator and perfused at arterial pressure it was possible to deploy an endovascular stent under fluoroscopic control and to perform angiography. The study has shown that conventional rapid prototyping technology can be used to manufacture flexible, radiolucent replicas which provide a realistic training environment for endovascular procedures.

Keywords

polymers models aortic aneurysm rapid prototyping vascular surgical procedures stents tomography selective laser sintering

Get full access to this article

View all access options for this article.

References

Berridge

D. C.

Chamberlain

Guy

A. J.

Lambert

Prospective audit of abdominal aortic aneurysm surgery in the northern region from 1988 to 1992. Northern Vascular Surgeons Group. Br. J. Surg., 1995, 82(7), 906–910.

Chuter

T. A.

Green

R. M.

Ouriel

Fiore

W. M.

DeWeese

J. A.

Transfemoral endovascular aortic graft placement. J. Vascular Surg., 1993, 18(2), 185–195.

Veith

F. J.

Abbott

W. M.

Yao

J. S.

Goldstone

White

R. A.

Abel

Guidelines for development and use of transluminally placed endovascular prosthetic grafts in the arterial system. Endovascular Graft Committee. J. Vascular Surg., 1995, 21(4), 670–685.

White

R. A.

Hodgson

K. J.

Ahn

S. S.

Hobson

R. W.

Veith

F. J.

Endovascular interventions training and credentialing for vascular surgeons. J. Vascular Surg., 1999, 29(1), 177–186.

Provision of vascular interventional radiology services. A document prepared for the Vascular Surgical Society of Great Britain and Ireland and the Royal College of Radiologists. (Accessed 20 November 2001).

Chong

C. K.

How

T. V.

Black

R. A.

Shortland

A. P.

Harris

P. L.

Development of a simulator for endovascular repair of abdominal aortic aneurysms. Ann. Biomed. Engng, 1998, 26(5), 798–802.

Chong

C. K.

Rowe

C. S.

Sivanesan

Rattray

Black

R. A.

Shortland

A. P.

Computer aided design and fabrication of models for in vitro studies of vascular fluid dynamics. Proc. Instn Mech. Engrs. Part H, Journal of Engineering in Medicine, 1999, 213(H1), 1–4.

Kato

Ishiguchi

Maruyama

Naganawa

Ishigaki

Accuracy of plastic replica of aortic aneurysm using 3D-CT data for transluminal stent-grafting: Experimental and clinical evaluation. J. Comput. Assist. Tomogr., 2001, 25(2), 300–304.

Robb

R. A.

Barillot

Interactive display and analysis of 3-D medical images. IEEE Trans. Med. Imaging, 1989, 8(3), 217–226.

10.

Magee

Bulpitt

Berry

3D automated segmentation and structural analysis of vascular trees using deformable models. In Proceedings of the 1st IEEE Workshop on Variational and Level Set Methods in Computer Vision, Vancouver, Canada, 13 July 2001, pp. 119–126.

11.

Keppel

Approximating complex surfaces by triangulation of contour lines. IBM J. Res. Dev., 1975, 19, 2–11.

12.

Lermusiaux

Leroux

Tasse

J. C.

Castellani

Martinez

Aortic aneurysm: Construction of a life-size model by rapid prototyping. Ann. Vascular Surg., 2001, 15(2), 131–135.

13.

Seitz

van de Crommert

Esser

K. J.

McAlea

Routes to plastic models and prototypes using the SLS(R) selective laser sintering process. In Rapid Prototyping and Flexible Manufacturing, Munich, Germany, 16 June 1997 (Eds Ahlers

R. G.

Reinhart

), pp. 106–111.

Flexible tubular replicas of abdominal aortic aneurysms

Abstract

Abstract

Keywords

Get full access to this article

References