The use of a radiolucent composite material permits easier and more accurate radiographic evaluation of the bone healing process, and results in a much lighter system. The finite element method (FEM) is employed to determine the worst possible in-service loading condition and the ring dimensions are modified accordingly. Half-ring prototypes are produced using two types of composite materials: knitted aramid fibre fabric reinforced epoxy and random short carbon (RSC) fibre reinforced epoxy. The in-plane compressive strength and axial stiffness of the complete frame are tested according to ASTM specifications. The performance is evaluated, and compared with an existing system in simulated in-service conditions.
IlizarovG.The Transosseous Osteosynthesis: Theoretical and Clinical Aspects of the Regeneration and Growth of Tissue, 1992 (Springer-Verlag, Berlin, New York).
GasserB.BomanB.WyderD.SchneiderE.Stiffness characterization of the circular Ilizarov device as opposed to conventional external fixatorsJ. Biomech. Engng, 1990, 112, 15.
PowelP. C.Engineering with Fibre-Polymer Laminates, 1994 (Chapman and Hall, London).
9.
KummerF. J.Biomechanics of the Ilizarov external fixatorClin. Orthop. Related Res., 1992, 280 (7), 11–14.
10.
D3039/D3039M Standard Test Method For Tensile Properties of Polymer Matrix Composite Materials, Annual Book of ASTM Standards, Vol. 14.02, October 1995 (American Society for Testing and Materials, Philadelphia, Pennsylvania).
11.
ASTM: F1746-96 Standard Test Method for Determining In-Plane Compressive Properties of Circular Ring or Ring Segment Bridge Elements, Annual Book of ASTM Standards, Vol. 31, February 1997 (American Society for Testing and Materials, Philadelphia, Pennsylvania).
12.
CarterD. R.Biomechanics of bone In The Biomechanics of Trauma (Eds NahumA. M.MelvinJ.), 1985, p. 157 (Appleton-Century-Crofts, Norwalk, Connecticut).
13.
ISO-1438 Standard Test Method for Determining the Stiffness of External Fixator Systems, Draft Standard, 1997 (International Standardization Organization).
14.
KummerF. J.Technical note: Evaluation of new Ilizarov ringsBull. Hosp. Jt Dis. Orthop. Inst., 1990, 50, 88.
15.
DallyJ. W.RileyW. F.Experimental Stress Analysis, 3rd edition, 1991, p. 48 (McGraw-Hill, New York).
16.
PodolsokyA.ChaoE. Y. S.Biomechanical performances of Ilizarov external fixatorsTrans. Orthop. Res., 1990, 15, 416.
17.
FlemingB.PaleyD.KristiansenT.PopeM. A.Biomechanical analysis of the Ilizarov external fixatorClin. Orthop. Related Res., 1989, 241, 95.
18.
ChaoE. S.HuiskesR.Guidelines for external fixation frame rigidity and stressesJ. Orthop. Res., 1986, 4, 68–75.
19.
RothbartH. A.Mechanical Design Handbook, 1996 (McGraw-Hill, New York).
20.
Patran User Manual (Macneill-Schwindler Corporation, Los Angeles, California).
21.
GolyakhovskyV.FrankelV. H.Operative Manual of Ilizarov Techniques, 1993 (Mosby, St Louis, Missouri).
22.
PauwelsF.Biomechanics of the Locomotor Apparatus, 1980 (Springer-Verlag, Berlin) (translated from German edition, 1965).
23.
NomineA. M.DuboisD.MiannayD.BalladonP.HertierJ.Creep and cyclic tension behaviour of a type 316L stainless steel at room temperature In Low-Cycle Fatigue and Life Prediction (Eds AmzallagC.LeisB. N.RabbeP.), 1982 (American Society for Testing and Materials, Philadelphia, Pennsylvania).
