Assessment of the non-linear behaviour of plastic ankle foot orthoses by the finite element method

Abstract

The stiffness characteristics of plastic ankle foot orthoses (AFOs) are studied through finite element modelling and stress analysis. Particular attention is given to the modelling and prediction of non-linear AFO behaviour, which has been frequently observed in previous experimental studies but not fully addressed analytically. Both large deformation effects and material non-linearity are included in the formulation and their individual influence on results assessed. The finite element program is subsequently applied to the simulation of a series of tests designed to investigate the relation between AFO trimline location and stiffness for moderate and large rotations. Through careful consideration and identification of key modelling parameters, the developed finite element solution proves to be a reliable and effective alternative means of assessing variations of a typical plastic AFO design so that particular patient requirements could be met, in the long term.

Keywords

ankle foot orthosis orthosis stiffness orthosis trimline plantar flexion dorsiflexion polypropylene non-linearity finite elements

Get full access to this article

View all access options for this article.

References

Halar

Cardenas

D. D.

Ankle-foot orthoses: Clinical implications. Phys. Med. Rehabil., 1987, 1 (1), 45–66.

Condie

D. N.

Meadows

C. B.

Some biomechanical considerations in the design of ankle-foot orthoses. Orthotics and Prosthetics, 1977, 31 (3), 45–52.

Lehmann

J. F.

Esselman

P. C.

M. J.

Smith

J. C.

Delateur

B. J.

Dralle

A. J.

Plastic ankle-foot orthoses: Evaluation of function. Arch. Phys. Med. Rehabil., 1983, 64, 402–407.

Golay

Lunsford

B. R.

Greenfield

The effect of malleolar prominence on polypropylene AFO rigidity and buckling. J. Prosthetics Orthotics, 1989, 1 (4), 231–241.

Yamamoto

Ebina

Iwasaki

Kubo

Kawai

Hayashi

Comparative study of mechanical characteristics of plastic AFOs. J. Prosthetics Orthotics, 1993, 5 (2), 59–64.

Lunsford

T. R.

Ramm

Miller

J. A.

Viscoelastic properties of plastic pediatric AFOs. J. Prosthetics Orthotics, 1994, 6 (1), 3–9.

Sumiya

Suzuki

Kasahara

Stiffness control in posterior-type plastic ankle-foot orthoses: Effect of ankle trimline, Part 1: A device for measuring ankle moment. Prosthetics Orthotics Int., 1996, 20 (2), 129–131.

Sumiya

Suzuki

Kasahara

Stiffness control in posterior-type plastic ankle-foot orthoses: Effect of ankle trimline, Part 2: Orthosis characteristics and orthosis/ patient matching. Prosthetics Orthotics Int., 1996, 20 (2), 132–137.

Nagaya

Shoehorn-type ankle-foot orthoses: Prediction of flexibility. Arch. Phys. Med. Rehabil., 1997, 78, 82–84.

10.

Klasson

Convery

Raschke

Test apparatus for the measurement of the flexibility of ankle-foot orthoses in planes other than the loaded plane. Prosthetics Orthotics Int., 1998, 22 (1), 45–53.

11.

Lord

Jones

Issues and themes in computer aided design for external prosthetics and orthotics. J. Biomed. Engng, 1988, 10, 491–498.

12.

Lam

P. C.

Reddy

N. P.

Downing

Effects of heel and toe forces on ankle-foot orthoses design using finite element analysis. ASME Des. Engng Div. (Publ.), 1986, 1, 49–52.

13.

Lam

P. C.

Reddy

N. P.

Downing

Dynamic responses of ankle-foot orthoses. ASME Bioengng Div. (Publ.), 1986, 2, 130–131.

14.

Leone

Diemente

Gustave

Lopez-Isa

Structural analysis of solid ankle-foot orthoses. Proceedings of the 14th Annual Northeast Bioengineering Conference, Durham, New Hampshire, 1988, pp. 26–28.

15.

Leone

Diemente

Lopez-Isa

Structural stability prediction for thermoplastic ankle-foot orthoses. In Proceedings of the 17th Annual Northeast Bioengineering Conference, Hartford, Connecticut, April 1991, pp. 231–232.

16.

Chu

T. M.

Reddy

N. P.

Padovan

Three-dimensional finite element stress analysis of the polypropylene, ankle-foot orthosis: Static analysis. Med. Engng Physics, 1995, 17 (5), 372–379.

17.

ANSYS User's Manual for Revision 5.1, Vols I-IV, 1994 (Swanson Analysis Systems Inc., Houston).

18.

Arnold

M. A.

Finite element analysis of ankle foot orthoses. PhD thesis, Department of Mechanical Engineering, University of Southampton, 1999.

19.

Callister

W. D.

Materials Science and Engineering: An Introduction, 2nd edition, 1991 (John Wiley and Sons, Chichester).

20.

Williams

J. G.

Stress Analysis of Polymers, 1973 (Longman, London).

21.

Ogorkiewicz

R. M.

Engineering Design Guides 17—The Engineering Properties of Plastics, 1977 (Oxford University Press, Oxford).

22.

Data Sheets on the Physical, Mechanical and Thermal Properties of Various Polymers, Issue 1, 1995 (North Sea Plastics Limited, Glasgow).

23.

Birley

A. W.

Scott

M. J.

Plastic Materials: Properties and Applications, 1982 (Leonard Hill, Glasgow).

24.

Thompson

J. M. T.

Hunt

G. W.

A General Theory of Elastic Stability, 1973 (John Wiley, London).