The supplemental lubrication mechanism by means of an electric field was proposed to reduce friction and wear for the advanced joint prosthesis with the low elastic modulus bearing surface. The possibility of application of this mechanism to the prosthesis was investigated by the fundamental and experimental procedures in simplified sliding conditions. Conductive silicon rubber was used as the low elastic modulus surface. The counterfaces were a titanium alloy and a stainless steel. Protein (y-globulin) in lubricant appeared to cause the tribological characteristic to deteriorate in the mixed lubrication regime. High friction seemed to be brought about by the obstruction against the entraining of the fluid flow and the high shear stress due to the microbonding between the asperities of bearing surfaces, which were derived from the adsorbed protein on the hydrophobic surfaces. The repulsive force between the adsorbed film and the bearing materials by means of the d.c. electric field, and the continuous change in polarity on the surface by means of the a.c. electric field appeared to affect the adsorbed film adjacent to the bearing material, so that friction and wear were varied.
OkaM.NoguchiT.KumarP.IkeuchiK.YamamotoT.HyonS. H.IkadaY.Development of an artificial articular cartilage. Clin. Mater., 1990, 6 (361–381), 63–65.
4.
DowsonD.FisherJ.JinZ. M.AugerD. D.JobbinsB.Design considerations for cushion form bearings in artificial hip joints. Proc. Instn Mech. Engrs, Part H, Journal of Engineering in Medicine, 1991, 205(H1), 59–68.
5.
TsukamotoY.YamamotoM.MabuchiK.MoritaM.SasadaT.Boundary lubricating property of synovial fluid on artificial materials and lubrication of artificial joints. J. Jap. Orthop. Assoc., 1983, 57, 91–99.
6.
WalkerP. S.ErkmanM. J.Metal-on-metal lubrication in artificial human joints. Wear, 1972, 21, 377–392.
7.
NakanishiY.MurakamiT.HigakiH.Lubrication property of metal-on-metal hip joints. In Proceedings of the International Conference on New Frontiers in Biomechanical Engineering—Toward the New Century, 1997, pp. 443–446 (Japan Society of Mechanical Engineers, Tokyo).
8.
YamamotoY.YagiJ.HigakiH.Effect of externally applied electric field on friction and wear characteristics. Jap. Soc. Mech. Engrs Int. J., Ser. Ill, 1992, 35 (4), 614–646.
9.
ZakiMDowsonD.The influence of applied interfacial electrical potential upon the friction of polyethylene and articular cartilage under lubricated conditions. In Mixed Lubrication and Lubricated Wear (Eds DowsonD.), 1985, pp. 230–235 (Butterworth, London).
10.
HigakiH.MurakamiT.NakanishiY.Lubricating ability of Langmuir-Blodgett films as boundary lubricating films on articular surfaces. Jap. Soc. Mech. Engrs Int. J., Ser. C, 1997, 62 (4), 776–781.
11.
NakanishiY.MurakamiT.HigakiH.Effects of electric field on lubricating ability of synovia constituents. In Elastohydrodynamics 96: Fundamentals and Applications in Lubrication and Traction (Eds DowsonD.), 1996, pp. 383–384 (Elsevier, Amsterdam).
12.
YanakiT.YamaguchiM.Shear-rate dependence of the intrinsic viscosity of sodium hyaluronate in 0.2 M sodium chloride solution. Chem. Pharm. Bull., 1994, 42 (8), 1651–1654.
13.
YaoJ. Q.DowsonD.Elastohydrodynamic lubrication of soft-layered solids at elliptical contacts. Part 1: Elasticity analysis. Proc. Instn Mech. Engrs, Part J, Journal of Engineering Tribology, 1994, 208 (Jl), 31–41.
14.
DowsonD.YaoJ. Q.Elastohydrodynamic lubrication of soft-layered solids at elliptical contacts. Part 2: Film thickness analysis. Proc. Instn Mech. Engrs, Part J, Journal of Engineering Tribology, 1994, 208 (Jl), 43–52.
15.
HiranoF.KanetaM.Theoretical investigation of friction and sealing characteristics of flexible seals for reciprocating motion. In Proceedings of the Fifth BHRA International Conference on Fluid Sealing, 1971, pp. G3-33–G3-48 (British Hydromechanics Research Association, Cranfield).
16.
HiranoF.KanetaM.Experimental investigation of friction and sealing characteristics of flexible seals for reciprocating motion. In Proceedings of the Fifth BHRA International Conference on Fluid Sealing, 1971, pp. G2–17–G2–32 (British Hydromechanics Research Association, Cranfield).
17.
HiranoF.MurakamiT.Photoelastic study of elasto-hydrodynamic contact condition in reciprocating motion. In Proceedings of the Seventh BHRA International Conference on Fluid Sealing, 1975, pp. C4-51–C4-70 (British Hydromechanics Research Assocation, Cranfield).
18.
NordeW.LiklemaJ.The adsorption of human plasma albumin and bovine pancreas ribonuclease at negatively charged polystyrene surfaces. Part 1: Adsorption isotherms. Effects of charge, ionic strength, and temperature. J. Colloid Interface Sci., 1978, 66 (2), 157–265.
19.
NordeW.LiklemaJ.The adsorption of human plasma albumin and bovine pancreas ribonuclease at negatively charged polystyrene surfaces. Part 2: Hydrogen ion titrations. J. Colloid Interface Sci., 1978, 66 (2), 266–276.
20.
NordeW.LiklemaJ.The adsorption of human plasma albumin and bovine pancreas ribonuclease at negatively charged polystyrene surfaces. Part 3: Electrophoresis. J. Colloid Interface Sci., 1978, 66 (2), 277–284.
21.
NordeW.LiklemaJ.The adsorption of human plasma albumin and bovine pancreas ribonuclease at negatively charged polystyrene surfaces. Part 4: The charge distribution in the adsorbed state. J. Colloid Interface Sci., 1978, 66 (2), 285–294.
22.
CampbellP.DoornP.DoreyF.AmstutzH. C.Wear and morphology of ultra-high molecular weight polyethylene wear particles from total hip replacements. Proc. Instn Mech. Engrs, Part H, Journal of Engineering in Medicine, 1996, 210 (H3), 167–174.
23.
StachowiakG. H.StachowiakG. B.ChampbellP.Application of numerical descriptors to the characterization of wear particles obtained from joint replacements. Proc. Instn Mech. Engrs, Part H, Journal of Engineering in Medicine, 1997, 211 (H1), 1–10.
24.
KobayashiA.BonfieldW.KadoyaY.YamacT.FreemanM. A. R.ScottG.RevellP. A.The size and shape of particulate polyethylene wear debris in total joint replacements. Proc. Instn Mech. Engrs, Part H, Journal of Engineering in Medicine, 1997, 211 (H1), 11–15.
