Design of a surface replacement prosthesis for the proximal interphalangeal joint

Abstract

A surface replacement finger joint prosthesis was designed specifically for the proximal interphalangeal joint (PIPJ). The two-piece design consisted of a bi-condylar proximal phalangeal head and a conforming bi-concave middle phalangeal base. The bearing surfaces were designed as close to the original anatomy of the PIPJs as possible, using detailed information obtained from a previous anatomical study of 83 PIPJs by the present authors.

Four sizes of prosthesis were designed with maximum head diameters of 7, 8, 9 and 10 mm. Fixation of the joint prosthesis was achieved by an interference fit between the stems of semicircular crosssection and the phalangeal bone shafts. The main considerations for the stem designs were the offset from the centre of rotation, angle of inclination, length, and cross-sectional shape and size. It is proposed that the two components will be made from cross-linked polyethylene (XLPE) because it can be injection moulded to produce the complex shapes of the joint prosthesis. In addition, XLPE against itself has shown comparable wear rates with stainless steel against ultra-high molecular weight polyethylene from previous work by Joyce et al.

Keywords

proximal interphalangeal joint (PIPJ)surface replacement prosthesis cross-linked polyethylene (XLPE)

Get full access to this article

View all access options for this article.

References

Brannon

E. W.

Klein

Experiences with a finger joint prosthesis. J. Bone Jt Surgery, 1959, 41A (1), 87–102.

Swanson

A. B.

Finger joint replacement by silicone rubber implants and the concept of implant fixation by encapsulation. Ann. Rheum. Dis. Suppl., 1969, 28, 47–55.

Nalebuff

E. A.

The rheumatoid hand. Reflections on meta-carpo-phalangeal arthroplasty. Clin. Orthop. Related Res., 1984, 182, 150–159.

Lynch

Colville

Metacarpo-phalangeal joint arthroplasty of the rheumatoid hand. Ir. Med. J., 1987, 80 (2), 58–60.

Fleming

S. G.

Hay

E. L.

Metacarpo-phalangeal joint arthroplasty eleven year follow up study. J. Hand Surgery, 1984, 9B (3), 300–302.

Ash

H. E.

Unsworth

Proximal interphalangeal joint dimensions for the design of a surface replacement prosthesis. Proc. Instn Mech. Engrs, Part H, Journal of Engineering in Medicine, 1996, 210 (H2), 95–108.

Ash

H. E.

Unsworth

Further studies into proximal interphalangeal joint dimensions for the design of a surface replacement prosthesis: Medullary cavities and transverse plane shapes. Proc. Instn Mech. Engrs, Part H, Journal of Engineering in Medicine, 1997, 211 (H5), 377–390.

Leibovic

S. J.

Bowers

W. H.

Anatomy of the proximal interphalangeal joint. Hand Clinics, 1994, 10 (2), 169–178.

Blair

W. F.

Shurr

D. G.

Blackwater

J. A.

Metacarpo-phalangeal joint arthroplasty with a metallic hinged prosthesis. Clin. Orthop. Related Res., 1984, 184, 56–163.

10.

Flatt

A. E.

Ellison

M. R.

Follow-up notes on articles previously published in journal. Ill: Restoration of rheumatoid finger joint function. J. Bone Jt Surgery, 1972, 54A (6), 1317–1322.

11.

Girzadas

D. V.

Clayton

M. L.

Limitations of use of metallic prostheses in the rheumatoid hand. Clin. Orthop. Related Res., 1969, 67, 127–132.

12.

Stokoe

A finger function simulator and surface replacement prosthesis for the metacarpo-phalangeal joint. PhD thesis, University of Durham, 1990.

13.

Joyce

T. J.

Ash

H. E.

Unsworth

The wear of cross-linked polyethylene against itself. Proc. Instn Mech. Engrs, Part H, Journal of Engineering in Medicine, 1996, 210 (H1), 11–16.

14.

Chao

E. Y.

Opgrande

J. D.

Axmear

F. E.

Three-dimensional force analysis of finger joints in selected isometric hand functions. J. Biomechanics, 1976, 9, 387–396.

15.

Chao

E. Y.

K. N.

Determination of internal forces in the human hand. J. Engng Mechanics Div., ASCE, 1978, 104, 255–272.

16.

Weightman

Amis

A. A.

Finger joint force predictions related to design of joint replacements. J. Biomed. Engng, 1982, 4, 197–205.

17.

K. N.

Cooney

W. P.

Chao

E. Y.

Linscheid

R. L.

Functional strength measurement of normal fingers. Report, Orthopaedic Biomechanics Laboratory, Mayo Clinic, 1978.

18.

Swanson

A. B.

Matez

I. B.

De Groot

The strength of the hand. NY Univ. Med. School Interclin. Inf. Bull., 1974, 13 (1), 1–8.

19.

Cantrell

Measurement of weakness and dysfunction in the rheumatoid hand. Rheunatology Rehabil., 1976, 15, 182–184.

20.

Pearson

MacKinnon

M. J.

Meek

A. P.

Myers

D. B.

Palmer

D. G.

Diurnal and sequential grip function in normal subjects and effect of temperature change and exercise of the forearm on grip function in patients with rheumatoid arthritis and in normal controls. Scand. J. Rheumatology, 1982, 11, 113–118.