In the fabrication of many composite and adhesively bonded structures it is desirable to determine the extent to which complete cure is achieved. This review briefly discusses the fundamental issues which are involved in the monitoring of the cure process in thermoset resins. The application of the dielectric method is described as a non-destructive probe for the monitor of the cure process in thermoset resin systems. The principles of the technique are illustrated with reference to a simple epoxy-amine structural adhesive. Possible correlations between the changes in the dielectric properties with other physical property changes of a resin, e.g. viscosity, during cure are discussed.
YoungJ. B.LandryJ. G. N.CavoulacosV. N.Crack-growth and residual strength characteristics of 2 grades of glass-reinforced aluminum glare. Compos. Struct., 1994, 27 (4), 457–469.
2.
RoebroeksG.Fiber-metal laminates - recent developments and applications. Int. J. Fatigue, 1994, 16 (1), 33–42.
3.
XiaoY.WhiteR. G.AgliettiG. S.An experimental characterization of the acoustic fatigue endurance of GLARE and comparison with that of CFRP. Compos. Struct.2005, 68 (4), 455–470.
4.
DegamberB.FernandoG. F.Process monitoring of a thermosetting resin using optical-fiber sensors in a microwave environment. IEEE Sens. J., 2004, 4 (6), 713–721.
5.
NesbittA.NavabpourP.DegamberB.NightingaleC.MannT.FernandoG.DayR. J.Development of a microwave calorimeter for simultaneous thermal analysis, infrared spectroscopy and dielectric measurements. Meas. Sci. Technol., 2004, 15 (11), 2313–2324.
6.
GarciaP. J.WangS. Q.Localized dielectric cure monitoring through the panel thickness during oriented strandboard hot-pressing. Wood Fiber Sci., 2005, 37 (4), 691–698.
7.
WangS. Q.WinistorferP. M.Monitoring resin cure during particleboard manufacture using a dielectric system. Wood Fiber Sci., 2003, 35 (4), 532–539.
8.
HarperD. P.WolcottM. P.RialsT. G.Evaluation of the cure kinetics of the wood/pMDI bondline. Int. J. Adhesion Adhes., 2001, 21 (2), 137–144.
9.
HagerN. E.DomszyR. C.Monitoring of cement hydration by broadband time-domain-reflectometry dielectric spectroscopy. J. Appl. Phys., 2004, 96 (9), 5117–5128.
10.
Catala-CiveraJ. M.Giner-MaravillaS.Sanchez-HernandezD.de los ReyesE.Pressure-aided microwave rubber vulcanization in a ridged three-zone cylindrical cavity. J. Microw. Power Electromagn. Energy, 2000, 35 (2), 92–104.
11.
StephanF.SeytreG.BoiteuxG.UlanskiJ.Study of dielectric response of pmr-15 resin during cure. J. Non-Cryst. Solids, 1994, 172, 1001–1011.
RadhakrishnanS.PethrickR. A.Continuous UV cure monitoring and dielectric-properties of photocrosslinked epoxy acrylate resins. J. Appl. Polym. Sci., 1994, 51 (5), 863–871.
14.
RadhakrishnanS.SainiD. R.Dielectric monitoring of the curing process in cyanoacrylate resin. Polym. Eng. Sci., 1993, 33 (3), 125–131.
15.
ShepardD. D.DayD. R.CravenK. J.Applications of dielectric analysis for cure monitoring and control in the polyester Smc/Bmc molding industry. J. Reinf. Plast. Compos., 1995, 14 (3), 297–308.
16.
AlpersteinD.NarkisM.SiegmannA.BinderB.The effect of curing of unsaturated polyester resin on the dynamic relaxation-time. Polym. Eng. Sci., 1995, 35 (9), 754–758.
WolcottM. P.RialsT. G.In-situ cure monitoring of isocyanate adhesives using microdielectric analysis. Forest Prod. J., 1995, 45 (2), 72–77.
19.
HeggM. C.OgaleA.MescherA.MamishevA. V.MinaieB.Remote monitoring of resin transfer molding processes by distributed dielectric sensors. J. Compos. Mater., 2005, 39 (17), 1519–1539.
20.
SkordosA. A.KarkanasP. I.PartridgeI. K.A dielectric sensor for measuring flow in resin transfer moulding. Meas. Sci. Technol., 2000, 11 (1), 25–31.
21.
VaidyaU. K.JadhavN. C.HosurM. V.GillespieJ. W.FinkB. K.Assessment of flow and cure monitoring using direct current and alternating current sensing in vacuum-assisted resin transfer molding. Smart Mater. Struct., 2000, 9 (6), 727–736.
22.
SkordosA. A.PartridgeI. K.Dielectric flow sensing in resin transfer moulding of carbon fibre reinforced composites. Plast. Rubber Compos., 2000, 29 (8), 391–394.
23.
McIlhaggerA.BrownD.HillB.The development of a dielectric system for the on-line cure monitoring of the resin transfer moulding process. Compos. A, Appl. Sci. Manuf., 2000, 31 (12), 1373–1381.
24.
ShigueC. Y.dos SantosR. G. S.BaldanC. A.RuppertE.Monitoring the epoxy curing by the dielectric thermal analysis method. IEEE Trans. Appl. Supercond., 2004, 14 (2), 1173–1176.
25.
AbrahamD.McIlhaggerR.Glass fibre epoxy composite cure monitoring using parallel plate dielectric analysis in comparison with thermal and mechanical testing techniques. Compos. A, Appl. Sci. Manuf., 1998, 29 (7), 811–819.
26.
DayD. R.ShepardD. D.Dielectric monitoring of cure and diffusion in thin coatings. Abstracts of papers of The American Chemical Society, PMSE, 1988, vol. 195, p. 219.
27.
KranbuehlD.DomanskiA.In situ monitoring of coating polymerization, cure and aging using frequency dependent dielectric monitoring. JCT Coatings Tech., 2004, 1 (6), 48–55.
28.
KranbuehlD.HoodD.RogozinskiJ.MeyerA.NeagM.Monitoring the changing state of a polymeric coating resin during synthesis, cure and use. Prog. Org. Coat., 1999, 35 (1–4), 101–107.
GonnetJ. M.GuilletJ.SirakovI.FulchironR.SeytreG.‘In-situ’ monitoring of the non-isothermal crystallization of polymers by dielectric spectroscopy. Polym. Eng. Sci., 2002, 42 (6), 1159–1170.
31.
KwonJ. W.ChinW. S.LeeD. G.In situ cure monitoring of adhesively bonded joints by dielectrometry. J. Adhes. Sci. Technol., 2003, 17 (16), 2111–2130.
32.
LiC. S.CaoM. S.WangR. G.WangZ. P.QiaoY. J.WanL. B.TianQ.LiuH. T.ZhangD. Q.LiangT. X.TangC. H.Fiber-optic composite cure sensor: Monitoring the curing process of composite material based on intensity modulation. Compos. Sci. Technol., 2003, 63 (12), 1749–1758.
MethvenJ. M.KatramadosY.In-line quality monitoring of pultruded profiles using dielectric measurements. Polym. Polym. Compos., 1997, 5 (1), 15–27.
35.
DelidesC. G.HaywardD.PethrickR. A.VatalisA. S.Dielectric and morphological investigations of phase-separation and cure in rubber-modified epoxyresins - comparison between teta-based and ddm-based systems. J. Appl. Polym. Sci., 1993, 47 (11), 2037–2051.
36.
MaistrosG. M.BlockH.BucknallC. B.PartridgeI. K.Dielectric monitoring of phase-separation during cure of blends of epoxy-resin with carboxyl-terminated poly(butadiene-co-acrylonitrile). Polymer, 1992, 33 (21), 4470–4478.
37.
ChoiJ. H.KimI. Y.LeeD. G.Development of the simple dielectric sensor for the cure monitoring of the high temperature composites. J. Mater. Process. Technol., 2003, 132 (1–3), 168–176.
38.
KortaberriaG.ArrutiP.MondragonI.In situ real-time monitoring of a diglycidyl ether of bisphenol a epoxy resin modified with poly(etherimide)/polysulphone blends by simultaneous dielectric/near-infrared spectroscopy. Macromol. Symp., 2003, 198, 389–398.
39.
MackinnonA. J.JenkinsS. D.McGrailP. T.PethrickR. A.Dielectric, mechanical and rheological studies of phase-separation and cure of a thermoplastic modified epoxy-resin - incorporation of reactively terminated polysulfones. Polymer, 1993, 34 (15), 3252–3263.
40.
CasaliniR.CorezziS.LiviA.LevitaG.RollaP. A.Dielectric parameters to monitor the crosslink of epoxy resins. J. Appl. Polym. Sci., 1997, 65 (1), 17–25.
41.
EloundouJ. P.GerardJ. F.PascaultJ. P.KranbuehlD.Modeling complex permittivity of an epoxyamine system using simultaneous kinetic and microdielectric studies. Macromol. Chem. Phys., 2002, 203 (13), 1974–1982.
42.
LevitaG.LiviA.RollaP. A.CulicchiC.Dielectric monitoring of epoxy cure. J. Polym. Sci. B, Polym. Phys., 1996, 34 (16), 2731–2737.
43.
MijovicJ.KennyJ. M.MaffezzoliA.TrivisanoA.BellucciF.NicolaisL.The principles of dielectric measurements for in-situ monitoring of composite processing. Compos. Sci. Technol., 1993, 49 (3), 277–290.
44.
WilliamsG.SmithI. K.HolmesP. A.VarmaS.Real-time dielectric studies of polymerizing systems. J. Phys., Cond. Matter, 1999, 11 (10A), A57–A74.
45.
YunS. Y.OhM.ParkN. J.A study on the cure behavior of epoxy molding compound. Polymer (Korea), 2000, 24 (6), 837–844.
46.
NixdorfK.BusseG.The dielectric properties of glass-fibre-reinforced epoxy resin during polymerization. Compos. Sci. Technol., 2001, 61 (6), 889–894.
47.
KimJ. S.LeeD. G.Measurement of the degree of cure of carbon fiber epoxy composite materials. J. Compos. Mater., 1996, 30 (13), 1436–1457.
48.
KimJ. S.LeeD. G.Online cure monitoring and viscosity measurement of carbon-fiber epoxy composite-materials. J. Mater. Process. Technol., 1993, 37 (1–4), 405–416.
49.
MaistrosG. M.PartridgeI. K.Dielectric monitoring of cure in a commercial carbon-fiber composite. Compos. Sci. Technol., 1995, 53 (4), 355–359.
50.
UrabeK.OkabeT.TsudaH.Monitoring of resin flow and cure with an electromagnetic wave transmission line using carbon fiber as conductive elements. Compos. Sci. Technol., 2002, 62 (6), 791–797.
51.
GillhamJ. K.The TBA torsion pendulum: A technique for characterizing the cure and properties of thermosetting systems. Polym. Int., 1997, 44 (3), 262–276.
52.
AffrossmanS.CollinsA.HaywardD.TrottierE.PethrickR. A.A versatile method of characterizing cure in filled reactive polymer systems. J. Oil Colour Chemists Asso., 1989, 72 (11), 452–454.
53.
PethrickR. A.Rheological studies using a vibrating probe. In Rheological measurement (Eds. CollyerA. A.CleggD. W.), 1988, 2nd edition, ch. 3 (Chapman and Hall, London).
SwierS.Van MeleB.Mechanistic modeling of the epoxy-amine reaction in the presence of polymeric modifiers by means of modulated temperature DSC. Macromolecules, 2003, 36 (12), 4424–4435.
57.
HaywardD.GawayneM.MahboubianjonesB.PethrickR. A.Low-frequency dielectric measurements (10(-4) to 6 × 10(4) Hz) - A new computer-controlled method. J. Phys. E, Sci. Instrum., 1984, 17 (8), 683–690.
58.
PethrickR. A.HaywardD.Real time dielectric relaxation studies of dynamic polymeric systems. Prog. Polym. Sci., 2002, 27 (9), 1983–2017.
59.
MijovicJ.YeeC. F. W.Use of complex impedance to monitor the progress of reactions in epoxy/amine model systems. Macromolecules, 1994, 27 (25), 7287–7293.
60.
KazilasM. C.PartridgeI. K.Exploring equivalence of information from dielectric and calorimetric measurements of thermoset cure-a model for the relationship between curing temperature, degree of cure and electrical impedance. Polymer, 2005, 46 (16), 5868–5878.
61.
KazilasM. C.PartridgeI. K.Temperature modulated dielectric analysis (TMDA), a new experimental technique for the separation of temperature and reaction effects in dielectric cure monitoring signals. Meas. Sci. Technol., 2004, 15 (5), L1–L4.
62.
SkordosA. A.PartridgeI. K.Determination of the degree of cure under dynamic and isothermal curing conditions with electrical impedence spectroscopy. J. Polym. Sci. B, Polym. Phys., 2004, 42 (1), 146–154.
