Fatigue failures of stressed components are invariably initiated at sites where there is some feature causing the local stress to be significantly higher than the nominal design stress. Determination of stress concentration factors is therefore essential for the correct design of components subject to fatigue-inducing loads. This paper reports on the development of an expert system for advising aerospace designers about stress concentrations. The stress concentration evaluation system (SCONES) encapsulates and combines analytical, experimental and heuristic information for determination and optimization of stress concentration factors.
SwiftK. G.BookerJ. D.Exposed to failure? Assessing the risk of non-conformance. Product Liability Int., June 1995,83–85.
2.
FieldS. W.SwiftK. G.Effecting a Quality Change, 1996 (Arnold, London).
3.
CarterA. D. S.Mechanical Reliability, 1986, p. 243 (Macmillan, London).
4.
HowlandR. C. J.On the stresses in the neighbourhood of a circular hole in a strip under tension. Phil. Trans. R. Soc, 1930, 229, 49–86.
5.
Sjöstrom, S. On the stresses at the edge of an eccentrically located circular hole in a strip under tension. Technical Report 36, Aeronautical Institute of Sweden, 1950.
6.
LingC.-B.Stresses in a notched strip under tension. /. Appl. Meek A, 1947, 275–280.
KosamatkaJ. B.FriesR. H.ReinholtzC. F.Tension and bending stress concentration factors in ‘U’, ‘V and opposed ‘U'-'V notches. J. Strain Analysis, 1990, 25 (4), 233–240.
9.
Stress concentrations: Interaction and stress decay for selected cases. Engineering Sciences Data Unit item 85045, 1985.
10.
MuskhelishviliN. I.Some Basic Problems of the Mathematical Theory of Elasticity, 1963 (Noordhoff).
11.
YoungW. C. (Ed.) Roark's Formulas for Stress and Strain, 6th edition, 1989 (McGraw-Hill, New York).
12.
PetersonR. E.Stress Concentration Factors, 1964 (John Wiley, New York).
13.
IsidaM.On the bending of an infinite strip with an eccentric circular hole. In Proceedings of Second Japan Congress on Applied Mechanics, p. 219.
14.
GrahamR. H.GillL.RainesM.SwiftK. G.New progress in evaluation of stress concentration interactions in the aerospace industry. In Proceedings of the International Committee on Aeronautical Fatigue, Bellevue, Washington, USA, 12–16 July 1999.
15.
GrahamR. H.Interactions of stress features in the aerospace industry. Engng Integrity, January 1999, 5, 26–29.
16.
GoldbergD. E.Genetic Algorithms in Search, Optimisation and Machine Learning, 1989 (Addison-Wesley, Reading, Massachusetts).
