A recently developed condition-based maintenance model is described which utilizes reliability data combined with condition-monitoring and measurements to predict the remaining useful life of critical components in a hot strip steel mill. The results obtained from case studies are presented which indicate how the model can be used as part of a condition-based maintenance strategy.
GoodeK. B.RoylanceB. J.MooreJ.Development of predictive model for monitoring of hot strip mill. Iron Steelmaking, 1998, 25 (1), 42–47.
2.
GoodeK. B.RoylanceB. J.MooreJ.The development of a predictive model for condition-based maintenance in a steel works hot strip mill. In Proceedings of the JOAP International Condition Monitoring Conference, Mobile, Alabama, 1998, pp. 203–218.
3.
WheelerD. J.ChambersD. S.Understanding Statistical Process Control, 1990, pp. 5–77 (SPC Press).
4.
WeatherillG. B.BrownD. W.Statistical Process and Control-Theory and Practice, 1990 (Chapman and Hall, London).
5.
AsherH.FeingoldH.Repairable Systems Reliability, 1984 (Marcel Dekker, New York).
6.
Van AlvenW. H.Reliability Engineering, 1964 (Prentice-Hall, Englewood Cliffs, New Jersey).
7.
DavidsonJ. F.Reliability of Mechanical Systems, IMechE Guides for the Process Industry, 1988 (Mechanical Engineering Publications, London).
8.
SherwinD. J.Improved schedules by using data collection under preventative maintenance. IEEE Trans. Reliability, 1984, R33 (4), 315–320.
9.
BlochH. P.GeitnerF. K.An Introduction to Machinery Reliability Assessment, 1990, pp. 33–34 (Van Nostrand Reinhold, New York).
10.
CoxD. R.LewisP. A. W.The Statistical Analysis of Series of Events, 1966 (John Wiley, New York).
11.
JardineA. K.S.AndersonP. M.Use of concomitant variables for reliability estimation. Maintenance Managmt Int., 1985, 5, 135–140.
12.
JardineA. K. S.AndersonP. M.MannD. S.Application of the Weibull proportional hazard model to aircraft and marine engine failure data. Qual. Reliability Engng Int., 1987, 3, 77–82.
13.
ChristerA. H.WallerW. M.Delay time models of industrial inspection maintenance problems. J. Opl. Res. Soc., 1984, 35 (5), 401–406.
14.
ChristerA. H.WallerW. M.Reducing production downtime using delay time analysis. J. Opl. Res. Soc., 1984, 35 (6), 499–512.
15.
FitchJ. C.Proactive and predictive strategies for setting oil analysis alarms and limits. In Proceedings of the JOAP International Condition Monitoring Conference, Mobile, Alabama, 1998, pp. 370–378.
16.
MoubrayJ.RCM II, 1991 (Butterworth-Heinemann, Oxford).
17.
BS 7854 Mechanical Vibration—Evaluation of Measurements on Non-rotating Parts (British Standards Institution, London).
