The onset and development of cavitation in the annular needle seat passage of piezo-driven outward-opening pintle injector nozzles used with spray-guided direct-injection gasoline engines are studied using a Eulerian-Lagrangian computational fluid dynamics cavitation model. Cavitation is formed because of the fluid acceleration taking place at the needle sealing area and it has been found to be affected by its geometric details. Various submodels for nucleation and bubble formation, further bubble growth and collapse, as well as bubble break-up and transport are incorporated into the model. Qualitative model validation is performed against experimental data reported elsewhere in large-scale nozzle replicas, showing similar cavitation patterns to be formed. These consist of vapour pockets rather than a continuous vapour film and develop transiently in a rather chaotic manner around the circumferential needle sealing area, even under stationary geometry and fixed-flowrate conditions. Further transient effects associated with the fast opening and closing of the piezo-controlled needle valve are also presented.
TichyM.BackerH.Investigation of injection concepts to optimize the combustion for spray-guided GDI methods using optical techniques. In Proceedings of the Seventh International Symposium on Internal combustion diagnostics, Kurhaus Baden-Baden, Germany, 18–19 May 2006, p. 37 (AVL Deutschland, Mainz-Kastel).
2.
SchintzelK.WillandJ.Measuring of spray-guided combustion systems by optical measurement technique in combination with pressure indication and simulation. In Proceedings of the Seventh International Symposium on Internal combustion diagnostics, Kurhaus Baden-Baden, Germany, 18–19 May 2006, pp. 441–453 (AVL Deutschland, Mainz-Kastel).
3.
FischerJ.KernW.UnterwegerG.WittA.DurstB.SchunemannE.SchwarzC.Methods for the development of the spray guided BMW DI combustion system. In Proceedings of the Seventh International Symposium on Internal combustion diagnostics, Kurhaus Baden-Baden, Germany, 18–19 May 2006, pp. 413–423 (AVL Deutschland, Mainz-Kastel).
4.
FanslerT.MichaelD.DuwelI.ZimmermannF.Fuel-spray and spark-plug interactions in a spray-guided direct-injection gasoline engine. In Proceedings of the Seventh International Symposium on Internal combustion diagnostics, Kurhaus Baden-Baden, Germany, 18–19 May 2006, pp. 81–97 (AVL Deutschland, Mainz-Kastel).
5.
AltenschmidtF.BertschD.BeznerM.LaudenbachN.ZahnM.SchauppU.KadenA.The analysis of the ignition process on SI-engines with direct injection in stratified mode. Proceedings of the Seventh International Symposium on Internal combustion diagnostics, Kurhaus Baden-Baden, Germany, 18–19 May 2006, pp. 395–411 (AVL Deutschland, Mainz-Kastel).
6.
AblingerS.-L.WetzelM.ArdeyN.RottengruberH.Fuel injection strategies for a charged DISI engine. Proceedings of the Seventh International Symposium on Internal combustion diagnostics, Kurhaus Baden-Baden, Germany, 18–19 May 2006, pp. 167–187 (AVL Deutschland, Mainz-Kastel).
7.
WirthM.ZimmermannD.FriedfeldtR.CaineJ.SchamelA.DaviesM.StorchA.Ries-MüllerK.GansertK.-P.PilgramG.OrtmannR.WürfelG.GerhardtJ.A Cost optimised gasoline spray guided direct injection system for improved fuel economy. In Proceedings of the IMechE Seminar on Fuel economy and engine downsizing, London, UK, 13 May 2004 (Professional Engineering Publishing Limited, London).
LippertA. M.El TahryS. H.HueblerM. S.ParrishS. E.InoueH.NoyoriT.NajamaK.AbeT.Development and optimization of a small-displacement spark-ignition direct-injection engine-stratified operation. SAE paper 2004-01-0033, 2004.
10.
PontoppidanM.GavianiG.BellaG.De MaioA.Optimization by CFD simulation of spray formation parameters to adapt direct injection high-pressure fuel injectors to high-speed SI-engines. SAE paper 2004-01-0539, 2004.
11.
MarchiA.Internal flow and spray characteristics of pintle-type piezo injectors. PhD Thesis, City University, London, UK, 2007.
12.
DasS.VanBrocklinP. G.Effect of design and operating parameters on the spray characteristics of an outwards opening injector. In Proceedings of the 13th International Multidimensional Engine Modeling User's Group Meeting, Detroit, Michigan, USA, 2 March2003, pp. 1–6.
13.
SoteriouC.AndrewsR. J.SmithM.Direct injection diesel sprays and the effect of cavitation and hydraulic flip on atomization. SAE paper 950080, 1995.
14.
ChavesH.KnappM.KubitzekA.ObermeierF.Experimental study of cavitation in the nozzle hole of diesel injectors using transparent nozzles. SAE paper 950290, 1995.
15.
SoteriouC.SmithM.AndrewsR. J.Diesel injection - laser light sheet illumination of the development of cavitation in orifices. In Proceedings of the IMechE Conference on Combustion Engines and Hybrid Vehicles, London, UK, 28-30 April1998, Paper C529/018/98.
16.
AfzalH.ArcoumanisC.GavaisesM.KampanisN.Internal flow in diesel injector nozzles: Modelling and experiments. In Proceedings of the IMechE Seminar on Fuel injection systems, London, UK, 1–2 December 1999, paper S492/S2/99 (Professional Engineering Publishing Limited, London).
17.
ArcoumanisC.BadamiM.FloraH.GavaisesM.Cavitation in real-size multi-hole diesel injector nozzles. SAE paper 2000-01-1249, 2000.
18.
ArcoumanisC.GavaisesM.FloraH.RothH.Visualisation of cavitation in diesel engine injectors. Mécanique Industries, 2001, 2(5), 375–381.
19.
RothH.GavaisesM.ArcoumanisC.Cavitation initiation, its development and link with flow turbulence in diesel injector nozzles. SAE paper 2002-01-0214, 2002.
20.
PayriF.BenajesJ.PastorJ. V.MolinaS.Influence of the post-injection pattern on performance, soot and NOx emissions in a HD diesel engine. SAE paper 2002-01-0502, 2002.
21.
TamakiN.ShimizuM.NishidaK.HiroyasuH.Effects of cavitation and internal flow on atomization of a liquid jet. Atomization Sprays, 1998, 8(2), 179–197.
22.
KubotaA.KatoH.YamaguchiH.A new modelling of cavitating flows - a numerical study of unsteady cavitation on a hydrofoil section. J. Fluid Mechanics, 1992, 240, 59–96.
23.
AvvaR. K.SinghalA.GibsonD. H.An enthalpy based model of cavitation. In Proceedings of the Cavitation and Multiphase Flow Forum, 1995, FED-vol.226, pp. 63–70 (American Society of Mechanical Engineers, New York).
24.
SchmidtD. P.RutlandC. J.CorradiniM. L.A numerical study of cavitating flow through various nozzle shapes. SAE paper 971597, 1997.
25.
GroggerH. A.AlajbegovicA.Calculation of the cavitating flow in venturi geometries using two fluid model. In Proceedings of the 1998 ASME Fluid Engineering Division Summer Meeting FEDSM'98, Washington, DC, USA, 1998, paper FEDSM 98-5295 (American Society of Mechanical Engineers, New York).
26.
YuanW.SauerJ.SchnerrG. H.Modeling and computation of unsteady cavitation flows in injection nozzles. In Proceedings of the First International Colloquium on Microhydrodynamics, Paris, France, 2000 (Société Française des Mécaniciens, Paris).
27.
MarcerR.Le CottierP.ChavesH.ArgueyrollesB.HabchiC.BarbeauB.A validated numerical simulation of diesel injector flow using a VOF method. SAE paper 2000-01-2932, 2000.
28.
SinghalA. K.AthavaleM. M.LiH. Y.JiangY.Mathematical basis and validation of the full cavitation model. In Proceedings of the 2001 ASME Fluid Engineering Division Summer Meeting FEDSM'01, New Orleans, Louisiana, USA, 2001 (American Society of Mechanical Engineers, New York).
29.
SinghalA. K.AthavaleM. M.LiH. Y.JiangY.Mathematical basis and validation of the full cavitation model. Trans. ASME, J. Fluids Engng, 2002, 124(3), 617–624.
30.
GiannadakisE.GavaisesM.RothH.ArcoumanisC.Cavitation modelling in single-hole diesel injector based on Eulerian-Lagrangian approach. In Proceedings of the THIESEL International Conference on Thermo- and Fluid Dynamic Processes in Diesel Engines, Valencia, Spain, 7-10 September2004.
31.
GiannadakisE.Modelling of cavitation in automotive fuel injector nozzles. PhD Thesis, Imperial College, University of London, 2005.
32.
GiannadakisE.GavaisesM.ArcoumanisC.Modelling cavitation in diesel injector nozzle holes. J. Fluid Mechanics, 2008 (in press).
33.
GiannadakisE.PapouliasD.GavaisesM.ArcoumanisC.SoteriouC.TangW.Evaluation of the predictive capability of diesel nozzle cavitation models. SAE paper 2007-01-0245, 2007.
34.
BrennenC. E.Cavitation and bubble dynamics, 1995 (Oxford University Press, Oxford).
35.
PlessetM. S.ProsperettiA.Bubble dynamics and cavitation. A. Rev. Fluid Mechanics, 1977, 9, 145–185.
36.
RothH.GavaisesM.ArcoumanisC.Cavitation initiation, its development and link with flow turbulence in diesel injector nozzles. SAE paper 2002-01-0214 SAE Trans. J. Engines, 2002, 111(3), pp. 561–580.
37.
PapouliasD.GiannadakisE.GavaisesM.GiannadakisE.TheodorakakosA.Cavitation in fuel injection systems for spray guided direct injection gasoline engines. SAE paper 2007-01-1418, 2007.
38.
GavaisesM.ToniniS.MarchiA.TheodorakakosA.BourisD.MatteucciL.Modelling of internal and near-nozzle flow of pintle-type outwards opening gasoline piezo-injectors. Int. J. Engine Res., 2006, 7, 381–397.
39.
MeyerR. S.BilletM. L.HollJ. W.Free-stream nuclei and traveling-bubble cavitation. Trans. ASME, J. Fluids Engng, 1992, 114(4), 672–679.
40.
YuanW.SchnerrG. H.Cavitation in injection nozzles - effect of injection pressure fluctuations. In Proceedings of the Fourth International Symposium on Cavitation (CAV2001), Pasadena, California, USA, 20-23 June2001.
41.
FengZ. G.MichaelidesE. E.Drag coefficients of viscous spheres at intermediate and high Reynolds numbers. Trans. ASME, J. Fluids Engng, 2001, 123(4), 841–849.
42.
AutonT. R.The dynamics of bubbles, drops and particles in motion in liquids. PhD Thesis, Department of Applied Mathematics and Theoretical Physics, University of Cambridge, 1984.
43.
RuscheH.IssaR.The effect of voidage on the drag force on particles, droplets and bubbles in dispersed two-phase flow. In Proceedings of the Second Japanese-European Two-Phase Flow Group Meeting, Tsukuba, Japan, 2000.
44.
FarrellK. J.Eulerian/Lagrangian analysis for the prediction of cavitation inception. Trans. ASME, J. Fluids Engng, 2003, 125(1), 46–52.
45.
HinzeJ. O.Turbulence, 2nd edition, 1975, p. 309 (McGraw-Hill, New York).
46.
HsiaoC.-T.ChahineG. L.LiuH. L.Scaling effect on bubble dynamics in a tip vortex flow: prediction of cavitation inception and noise. Report 98007-1, Dynaflow Inc., Jessup, Maryland, 2000.
47.
Martínez-BazánC.MontañésJ. L.LasherasJ. C.On the breakup of an air bubble injected into a fully developed turbulent flow. Part 1. Breakup frequency. J. Fluid Mechanics, 1999, 401, 157–182.
48.
PerryR. H.GreenD. W.Perry's chemical engineers' handbook, 7th edition, 1997 (McGraw-Hill, New York).
