In order to obtain greater accuracy in simulation, more sophisticated models are often required. When it comes to the torsional vibration of reciprocating mechanisms the effect of inertia variation is very important. It has been shown that the inclusion of this variation increases model accuracy for both single-cylinder and multi-cylinder engine torsional vibration predictions. Recent work by the present authors has revealed that piston-to-cylinder friction may modify an engine's ‘apparent’ inertia function. Kinematic analysis also shows that the piston side force and the dynamic piston-to-cylinder friction are interdependent. This has implications for engine vibration modelling. Most modern engines employ a gudgeon pin offset, and there is a growing interest in pursuing large crank offsets; hence, the effect of these on inertia variation is also of interest. This paper presents the derivation of the inertia function for a single engine mechanism, including both piston-to-cylinder friction and crank or gudgeon pin offset, and investigates the effect of each through predictions. The effect of crank offset on the variable inertia function is also verified by experiment.
SchumacherT.BiermannJ.-W.JanszN.WilleyJ.KupperK. Load change reactions of passenger cars: Method of investigation and improvement. Proc. Instn Mech. Engrs Part K: J. Multi-body Dynamics, 2003, 217(4), 283–291.
2.
BoysalA.RahnejatH. Torsional vibration analysis of a multi-body single cylinder internal combustion engine model. Appl. Mathl Modelling, 1997, 21(8), 481–493.
3.
FarshidianfarA.EbrahimiM.RahnejatH.MendayM.MoavenianM. Optimization of the high-frequency torsional vibration of vehicle driveline systems using genetic algorithms. Proc. Instn Mech. Engrs Part K: J. Multi-body Dynamics, 2002, 216, 249–262.
4.
GuzzomiA. L.HestermanD. C.StoneB. J. The effect of piston friction on engine block dynamics. Proc. IMechE Part K: J. Multi-body Dynamics, 2006, 221(2), 277–289.
5.
MuftiR. A.PriestM.ChittendenR. J. Experimental and theoretical study of instantaneous piston assembly friction in a gasoline engine. In Proceedings of the 2004 ASME/STLE International Joint Tribology Conference, Long Beach, California, USA, October2004, pp. 907–921.
6.
MistryK.BhattD. V.ShethN. R. Theoretical modeling and simulation of piston ring assembly of an IC engine. In Proceedings of the 2004 ASME/STLE International Joint Tribology Conference, Long Beach, California, USA, October2004.
7.
RichardsonD. E. Review of power cylinder friction for diesel engines. Trans. ASME J. Engng Gas Turbines Power, 2000, 122(4), 506–519.
8.
ZweiriY. H.WhidborneJ. F.SeneviratneL. D. Detailed analytical model of a single-cylinder diesel engine in the crank angle domain. Proc. Instn Mech. Engrs Part D: J. Automobile Engineering, 2001, 215(11), 1197–1216.
9.
HestermanD. C.StoneB. J. Secondary inertia effects in the torsional vibration of reciprocating engines - a literature review. Proc. Instn Mech. Engrs Part C: J. Mechanical Engineering Science, 1995, 209(1), 11–15.
10.
HestermanD. C.StoneB. J. A comparison of secondary inertia effects in a range of reciprocating engines. In Proceedings of the International Mechanical Engineering Congress, Canberra, Australia, 1994, pp. 1–6.
11.
HestermanD. C.DrewS. J.StoneB. J. Vibration of engines resulting from torsional vibration of crankshafts. In Proceedings of the Conference on Vibrations in rotating machinery, 1996, vol. 1 pp. 713–723 (Mechanical Engineering Publications Limited, London).
12.
RajendranS.NarasimhanM. V. Effect of inertia variation due to reciprocating parts and connecting rod on coupled vibration of crankshaft. Trans. ASME J. Engng Gas Turbines Power, 1997, 119(1), 257–264.
13.
HestermanD. C.StoneB. J. A systems approach to the torsional vibration of multi-cylinder reciprocating engines and pumps. Proc. Instn Mech. Engrs Part C: J. Mechanical Engineering Science, 1994, 208(6), 395–408.
14.
HestermanD. C. Torsional vibrations in reciprocating pumps and engines PhD Thesis, Department of Mechanical Engineering, University of Western Australia, Perth, Western Australia, 1992, p. 178.
15.
GuzzomiA. L.HestermanD. C.StoneB. J. Torsional vibration of engines. In Proceedings of the 12th International Conference on Sound and Vibration, Lisbon, Portugal, July2005, pp. 1–8.
16.
BrusaE.DelpreteC.GentaG. Torsional vibration of crankshafts: Effects of non-constant moments of inertia. J. Sound Vibr., 1997, 205(2), 135–150.
17.
PasrichaM. S. Effect of damping on parametrically excited torsional vibrations of reciprocating engines including gas forces. J. Ship Res., 2006, 50(2), 147–157.
18.
SchifferW. Advanced methods for static and dynamic shafting calculations. J. Nav. Architecture Shipbldg Industry (Brodogradnja), 2007, 58(2), 158–164.
19.
RahnejatH.Multi-body dynamics, 1998, p. 355 (Professional Engineering Publishing Limited, Bury St Edmunds).
20.
ZweiriY. H.WhidborneJ. F.SeneviratneL. D. Dynamic simulation of a single-cylinder diesel engine including dynamometer modelling and friction. Proc. Instn Mech. Engrs Part D: J. Automobile Engineering, 1999, 213(4), 391–402.
21.
DrewS. J.HestermanD. C.StoneB. J. Torsional excitation of variable inertia effects in a reciprocating engine. Mech. Systems Signal Processing, 1999, 13(1), 125–144.
22.
GuzzomiA. L.HestermanD. C.StoneB. J. The effect of piston friction on the torsional natural frequency of a reciprocating engine. Mechl Systems Signal Processing, 2007, 21(7), 2833–2837.
23.
ZweiriY. H.WhidborneJ. F.SeneviratneL. D. A comparison of dynamic models of various complexity for diesel engines. Mathl Computer modelling Dynamical Systems, 2002, 8(3), 273–289.
24.
WongV.TianT.MoughonL.TakataR.JocsakJ.Low-engine-friction technology for advanced natural-gas reciprocating engines. Annual Technical Progress Report, Massachesetts Institute of Technology, Cambridge, Massachesetts, 30 June2006.
25.
BalakrishnanS.RahnejatH. Isothermal transient analysis of piston skirt-to-cylinder wall contacts under combined axial, lateral and tilting motion. J. Physics D: Appl. Physics, 2005, 38(5), 787–799.
26.
BetzG.GabeleH.AssmusH.-O. Friction power and noise behaviour of the piston assembly. In Proceedings of the Second International Conference on Combustion Engines - Reduction of Friction and Wear, London, September1989, pp. 35–58.
27.
MaZ.-D.PerkinsN. C. An efficient multibody dynamics model for internal combustion engine systems. Multibody System Dynamics, 2003, 10(4), 363–391.
28.
ZweiriY. H. Diesel engine indicated torque estimation based on artificial neural networks. Int. J. Intell. Technol., 2006, 1(3), 233–239.
29.
ZweiriY. H.SeneviratneL. D. Diesel engine indicated and load torque estimation using a non-linear observer. Proc. IMechE Part D: J. Automobile Engineering, 2006, 220(6), 775–785.
30.
GarvinE. A. Offset crankshaft mechanism for an internal combustion engine. US Pat. 5816201, 1998.
31.
LeeC. L. Offset crankshaft engine. US Pat. 6058901, 2000.
32.
NyströmR. Device for converting a linear movement into a rotary movement. US Pat. 6851401, 2005.
33.
PriestM.DowsonD.TaylorC. M. Theoretical modelling of cavitation in piston ring lubrication. Proc. Instn Mech. Engrs Part C: J. Mechanical Engineering Science, 2000, 214, 435–447.
34.
XuH.BryantM. D.MatthewsR. D.KiehneT. M.SteenwykB. D. Friction predictions for piston ring-cylinder liner lubrication. In Proceedings of the 2004 Fall Technical Conference of the ASME Internal Combustion Engine Division, Long Beach, California, USA, 2004, pp. 773–784 (American Society of Mechanical Engineers, New York).
35.
ThringR. H. Piston skirt friction in internal combustion engines. ASME Paper S7–1CE-20, 1987.
36.
SmithE. H.ClarkC. A.SherringtonI. The measurement of piston assembly friction in a motored engine. IMechE Conference on Universal and Poly Research on IC Engines, 1991, pp. 185–190.
37.
SherringtonI.SmithE. H. The measurement of piston/piston-ring friction by the ‘floating -liner’ method. In Proceedings of the IMechE Seminar on Engine research and development, 1988, pp. 1–11 (Mechanical Engineering Publications Limited, London).
