Modelling and optimization of the resistance spot welding process via a Taguchi—neural approach in the automobile industry

Abstract

Many parameters affect the quality of the resistance spot welding (RSW) process. It is not easy to obtain optimal parameters of the RSW process in the automobile industry. Conventionally, the Taguchi method has been widely used in engineering; however, with this method the desired results can only be obtained with the use of very discrete control factors, thus leading to uncertainty about the real optimum. In the process to weld the low-carbon sheet steels of the auto body, the Taguchi method was used for the initial optimization of the RSW process parameters. A neural network with the Levenberg—Marquardt back-propagation algorithm was then adopted to develop the relationships between the welding process parameters and tensile shear strength of each specimen. The optimal parameters of the RSW process were determined by simulating the process parameters using a well-trained neural network model. Experimental results illustrate the Taguchi—neural approach.

Keywords

resistance spot welding Taguchi method neural network

Get full access to this article

View all access options for this article.

References

1 Cary

H. B

. Modern welding technology, 1994 (Prentice-Hall, Englewood Cliffs, New Jersey).

2 Benyounis

K. Y.

Olabi

A. G.

Hashmi

M. S. J

. Effect of laser welding parameters on the heat input and weld-bead profile. J. Mater. Processing Technol., 2005, 164–165, 978–985.

3 Taguchi

Elsayed

E. A.

Hsiang

T. C

. Quality engineering in production systems, 1989 (McGraw-Hill, New York).

4 Su

C. T.

Chiu

C. C.

Chang

H. H

. Parameter design optimization via neural network and genetic algorithm. Int. J. Ind. Engng, 2000, 7(3), 224–231.

5 Kim

I. S.

Jeong

Y. J.

Lee

C. W

. Prediction of welding parameters for pipeline welding using an intelligent system. Int. J. Advd Mfg Technol., 2003, 22, 713–719.

6 Bhadeshia

H. K. D. H.

Mackay

D. J. C.

Svensson

L. E

. Impact toughness of C-Mn steel arc welds - Bayesian neural network analysis. Mater. Sci. Technol., 1995, 11, 1046–1051.

7 Khaw

J. F. C.

Lim

B. S.

Lim

L. E. N

. Optimal design of neural networks using Taguchi method. Neurocomputing, 1995, 7, 225–245.

8 Phadke

M. S

. Quality engineering using robust design, 1989 (Prentice-Hall, Englewood Cliffs, New Jersey).

9 Ross

P. J

. Taguchi techniques for quality engineering, 1988 (McGraw-Hill, New York).

10.

10 Fowlkes

W. Y.

Creveling

C. M

. Engineering methods for robust product design, 1995 (Addison-Wesley, Reading, Massachusetts).

11.

11 Roy

R. K

. A primer on the Taguchi method, 1990 (Van Nostrand Reinhold, New York).

12.

12 Su

C. T.

Chiang

T. L

. Optimizing the IC wire bonding process using a neural networks/genetic algorithms approach. J. Intell. Mfg, 2003, 14, 229–238.

13.

13 Coit

D. W.

Jacson

B. T.

Smith

A. E

. Static neural network process model: Considerations and case studies. Int. J. Prod. Res., 1998, 36(11), 2953–2967.

14.

14 Funahashi

. On the approximate realization of continuous mapping by neural network. Neural Networks, 1989, 2, 183–192.

15.

Hagan

M. T.

Demuth

Beale

Neural network design, 1996 (PWS Publishing Company, Boston, Massachusetts).

16.

16 Hagan

M. T.

Menhaj

M. B

. Training feedforward networks with the Marquardt algorithm. IEEE Trans. Neural Networks, 1994, 5(6), 989–993.

17.

17 Haykin

. Neural networks - a comprehensive foundation, 1994 (Macmillan, London).

18.

Demuth

Beale

Neural network toolbox - for use with MATLAB, 1998 (The Mathworks, Inc., Natick, Massachusetts).

19.

19 Benardos

P. G.

Vosniakos

G. C

. Prediction of surface roughness in CNC face milling using neural networks and Taguchi's design of experiments. Robotics Computer Integrated Mfg, 2002, 18, 343–354.