In this paper, the spray development and its interaction with the piston geometry were investigated in a small-bore high-speed direct-injection optical diesel engine. The effects of injection angle, injection timing, injection pressure, and injection fuel quantity were studied. The entire liquid spray cycle was visualized by a background-corrected Mie-scattering technique using a high-speed digital video camera synchronized with a high-repetition-rate copper vapour laser. For some conditions, the initial injection velocity was estimated quantitatively. The results show that the injection angle and injection timing predominantly control the spray interaction with the piston geometry and the resulting air—fuel mixing mode. Narrow-angle injection leads to a significantly different air—fuel mixing process from the traditional wide-angle injector. If properly controlled, the narrow-angle direct-injection technique offers more flexibility on injection timing control with the fuel confined in the central bowl region without wetting the cylinder liner.
OnishiS.Hong JoS.ShodaK.Do JoP.KatoS.‘Active thermo-atmosphere combustion (ATAC) – a new combustion process for internal combustion engines.’ SAE paper 790501, 1979.
2.
NoguchiM.TanakaY.TanakaT.TakeuchiY.‘A study on gasoline engine combustion by observation of intermediate reactive products during combustion.’ SAE paper 790840, 1979.
TakedaY.KeiichiN.‘Emission characteristics of premixed lean diesel combustion with extremely early staged fuel injection.’ SAE paper 961163, 1996.
6.
IwabuchiY.KawaiK.ShojiT.TakedaY.‘Trial of new concept diesel combustion system – premixed compression ignition combustion.’ SAE paper 1999-01-0185, 2004.
7.
HelmantelA.DenbrattI.‘HCCI operation of a passenger car common rail DI diesel engine with early injection of conventional diesel fuel.’ SAE paper 2004-01-0935, 2004.
8.
KimuraS.AokiO.OgawaH.MuranakaS.EnomotoY.‘New combustion concept for ultra-clean and high efficiency small DI diesel engines.’ SAE paper 1999-01-3681, 1999.
9.
YokotaH.KudoY.NakajimaH.KakegawaT.SuzukiT.‘A new concept for low emission diesel combustion.’ SAE paper 970891, 1997.
10.
HasegawaR.YanagiharaH.‘HCCI combustion in DI diesel engine.’ SAE paper 2003-01-0745, 2003.
11.
KookS.BaeC.‘Combustion control using two-stage diesel fuel injection in a single-cylinder PCCI engine.’ SAE paper 2004-01-0938, 2004.
12.
WalterB.GatellierB.‘Development of the high power NADI concept using dual mode diesel combustion to achieve zero NOx and particulate emissions.’ SAE paper 2002-01-1744, 2002.
13.
WalterB.GatellierB.‘Near zero NOx emissions and high fuel efficiency diesel engine: the NADI TM concept using dual mode combustion.’Oil Gas Sci. Technol. – Rev. IFP58 (1) (2003): 101–114.
14.
WalterB.MonteiroL.MicheM.GatellierB.‘Improvement of exhaust and noise emissions of the NADITM concept using premixed type combustion with multiple stage injection.’ In Congres International Le diesel: aujourd'hui et demain (In International Congress The diesel engine: today and tomorrow), Lyon, France, 12–13 May 2004 (Sociétédes Ingénieurs de l'Automobile, Suresnes).
15.
LethnerG. A.JacobsT. J.ChryssakisC. A.AssanisD. N.SiewertR. M.‘Evaluation of a narrow spray cone angle, advanced injection timing strategy to achieve partially premixed compression ignition combustion in a diesel engine.’ SAE paper 2005-01-0167, 2005.
16.
FangT.CoverdillR. E.LeeC. F.WhiteR. A.‘Smokeless combustion within a small-bore HSDI diesel engine using a narrow angle injector. SAE paper 2007-01-0203, 2007;’SAE Trans.: J. Engines116 (2007): 255–270.
17.
FangT.CoverdillR. E.LeeC. F.WhiteR. A.‘Effects of injection angles on combustion processes using multiple injection strategies in an HSDI diesel engine.’Fuel87 (15–16) (2008): 3232–3239.
18.
FangT.CoverdillR. E.LeeC. F.WhiteR. A.‘Low-sooting combustion in a small-bore high-speed direct-injection diesel engine using narrow-angle injectors.’Proc. IMechE, Part D: J. Automobile Engineering222 (10) (2008): 1927–1937 DOI: 10.1243/09544070JAUTO751.
19.
GenzaleC. L.ReitzR. D.MusculusM. P. B.‘Effects of spray targeting on mixture development and emissions formation in late-injection low-temperature heavy duty diesel combustion.’Proc. Combust. Inst.32 (2009): 2767–2774.
20.
DecJ. E.EspeyC.‘Soot and fuel distributions in a DI diesel engine via 2-D imaging.’ SAE paper 922307, 1992.
21.
EspeyC.DecJ. E.‘The effect of TDC temperature and density on the liquid-phase fuel penetration in a DI diesel engine.’ SAE paper 952456, 1995.
22.
SiebersD. L.‘Liquid-phase fuel penetration in diesel sprays.’ SAE paper 980809, 1998.
23.
HigginsB. S.MuellerC. J.SiebersD. L.‘Measurement of fuel effects on liquid-phase penetration in DI sprays.’ SAE paper 1999-01-0519, 1999.
24.
ShaoJ.YanY.GreevesG.SmithS.‘Quantitative characterization of diesel sprays using digital imaging techniques.’Measmt Sci. Technol.14 (2003): 1110–1116.
25.
DelacourtE.DesmetB.BessonB.‘Characterization of very high pressure diesel sprays using digital imaging techniques.’Fuel84 (2005): 859–867.
FangT.LinY. C.FoongT. M.LeeC. F.‘Spray and combustion visualization in an optical HSDI diesel engine operated in low-temperature combustion mode with bio-diesel and diesel fuels.’ SAE paper 2008-01-1390, 2008.
28.
FangT.CoverdillR. E.LeeC. F.WhiteR. A.‘Low temperature premixed combustion within a small bore high speed direct injection (HSDI) optically accessible diesel engine using a retarded single injection.’Int. J. Automot. Technol.9 (5) (2008): 551–561.
29.
MathewsW. S.CoverdillR. E.LeeC. F.WhiteR. A.‘Liquid and vapor fuel distributions in a small-bore high-speed direct-injection diesel engine.’ SAE paper 2002-01-2666, 2002.
30.
FangT.LeeC. F.‘Biodiesel effects on the combustion processes in an HSDI diesel engine employing advanced multiple injection strategies.’Proc. Combust. Inst.32 (2) (2009): 2785–2792.
31.
FangT.CoverdillR. E.LeeC. F.WhiteR. A.‘Low temperature combustion within a small bore high speed direct injection (HSDI) diesel engine.’ SAE paper 2005-01-0919, 2005.
32.
FangT.CoverdillR. E.LeeC. F.WhiteR. A.‘Liquid and vapor fuel distributions within a high-speed direct injection (HSDI) diesel engine operating in HCCI and conventional combustion modes.’ SAE paper 2005-01-3838, 2005.
33.
FangT.CoverdillR. E.LeeC. F.WhiteR. A.‘Combustion and soot visualization of low temperature combustion within an HSDI diesel engine using multiple injection strategy.’ SAE paper 2006-01-0078, 2006.
TrujilloM. F.MathewsW.LeeC. F.PetersJ. E.‘Modeling and experiment of impingement and atomization of a liquid spray on a wall.’Int. J. Engine Res.1 (1) (2000): 87–105 DOI: 10.1243/1468087001545281.
36.
HiroyasuH.AraiM.‘Structure of fuels sprays in diesel engines.’ SAE paper 900475, 1990.
