A study on an application of a hybrid break-up model for dimethyl ether atomization in a common-rail injection system

Abstract

In this study, experimental and numerical investigations were performed to analyse the spray characteristics of dimethyl ether (DME) fuel in a common-rail fuel injection system. In order to analyse the DME fuel spray, overall spray characteristics such as the spray tip penetration, the spray evolution process, and the droplet size distribution were investigated by an application of the hybrid break-up model combined with primary and secondary break-up phenomena. The spray development process and spray tip penetration were measured experimentally from injected DME spray images obtained using a visualization system, while the microscopic characteristics were experimentally measured by a phase Doppler particle analyser system. Calculations based on hybrid break-up models were validated against the experimental results, and the associated break-up constants were optimized after the validation. Based on the optimized break-up constant, the calculated results under various experimental conditions were compared with measured results such as the spray development, the spray tip penetration, the Sauter mean diameter (SMD), and the SMD distribution.

Keywords

dimethyl ether (DME)spray characteristics hybrid break-up model Sauter mean diameter

Get full access to this article

View all access options for this article.

References

Oguma

Hyun

Goto

Konno

Kajitani

‘Atomization characteristics for various ambient pressure of dimethyl ether (DME).’ SAE paper 2002-01-1711, 2002.

Yoshio

Akira

‘An experimental study on DME spray characteristics and evaporation processes in a high pressure chamber.’ SAE paper 2001-01-3635, 2001.

Zhu

Huang

‘An experimental study on the spray structure of oxygenated fuel using laser-based visualization and particle image velocimetry.’

Fuel 85 (2006): 1458–1464.

Lee

J. W.

Bae

C. S.

‘Dimethyl ether (DME) spray characteristics compared to diesel in a common-rail fuel injection system.’ SAE paper 2002-01-2898, 2002.

Suh

H. K.

Lee

C. S.

‘Experimental and analytical study on the spray characteristics of dimethyl ether (DME) and diesel fuels within a common-rail injection system in a diesel engine.’

Fuel 87 (2007): 925–932.

Suh

H. K.

Park

S. W.

Lee

C. S.

‘Atomization characteristics of dimethyl ether fuel as an alternative fuel injected through a common-rail injection system.’

Energy Fuels 20 (2006): 1471–1481.

Suh

H. K.

Park

S. W.

Chon

M. S.

Lee

C. S.

‘Effect of ambient conditions on spray characteristics of DME fuel.’ In Proceedings of the Tenth Annual Conference on

Liquid atomization spray systems – Asia, Seoul, Republic of Korea, 2005, pp. 41–47 (Institute for Liquid Atomization and Spray Systems - Asia).

Teng

McCandless

J. C.

Schneyer

J. B.

‘Thermochemical characteristics of dimethyl ether – an alternative fuel for compression-ignition engine.’ SAE paper 2001-01-0154, 2001.

Teng

McCandless

J. C.

Schneyer

J. B.

‘Compression ignition delay (physical + chemical) of dimethyl ether – an alternative fuel for compression-ignition engine.’ SAE paper 2003-01-0759, 2003.

10.

Teng

McCandless

J. C.

Schneyer

J. B.

‘Thermodynamic properties of dimethyl ether – an alternative fuel for compression-ignition engines.’ SAE paper 2004-01-0093, 2004.

11.

Amsden

A. A.

‘KIVA-3: a KIVA program with block-structured mesh for complex geometries.’ Report LA-12503-MS, Los Alamos National Laboratory, Los Alamos, New Mexico, USA, 1993, pp. 33–38.

12.

T. F.

Patterson

R. D.

Reitz

R. D.

Farrell

P. V.

‘Experimental and numerical studies of high pressure multiple injection sprays.’ SAE paper 960861, 1996.

13.

Grant

R. P.

Middleman

‘Newtonian jet stability.’

AIChE J. 12 (1966): 669–678.

14.

Beatrice

Belardini

Bertoli

Cameretti

M. C.

Cirillo

N. C.

‘Fuel jet models for multidimension diesel combustion calculation; an update.’ SAE paper 950086, 1995.

15.

Reitz

R. D.

‘Modeling atomization processes in high-pressure vaporizing sprays.’

Atomisation Spray Technol. 3 (1987): 309–337.

16.

Kim

H. J.

Suh

H. K.

Park

S. H.

Lee

C. S.

‘An experimental and numerical investigation of atomization characteristics of biodiesel, dimethyl ether, and biodiesel–ethanol blended fuel.’

Energy Fuels 22 (3) (2008): 2091–2098.

17.

Kim

H. J.

Suh

H. K.

Lee

C. S.

‘Numerical and experimental study on the comparison between diesel and dimethyl ether (DME) spray behaviors according to combustion chamber shape.’

Energy Fuels 22 (4) (2008): 2851–2860.

18.

Park

S. W.

Lee

C. S.

‘Investigation of atomization and evaporation characteristics of high-pressure injection diesel spray using Kelvin–Helmholtz instability/droplet deformation and break-up competition model.’

Proc. IMechE, Part D: J. Automobile Engineering 218 (7) (2004): 767–777 DOI: 10.1243/0954407041580067.

19.

Bellman

Pennington

R. H.

‘Effects of surface tension and viscosity on Taylor instability.’

Q. Appl. Math. 12 (1954): 151–162.

20.

Park

S. W.

Kim

H. J.

Lee

C. S.

‘Investigation of atomization characteristics and prediction accuracy of hybrid models for high-speed diesel fuel sprays.’ SAE paper 2003-01-1045, 2003.

21.

Ibrahim

E. A.

Yang

H. Q.

Prezkwas

A. J.

‘Modeling of spray droplets deformation and break-up.’

AIAA J. Propulsion Power 9 (1993): 652–654.